Mounts

Cycplus Z1 bicycle computer holder The Cycplus Z1 holder allows you to quickly and stably mount your bicycle computer on the handlebars of your bicycle. It was made of high-quality materials, so it is not only very durable, but also provides the device placed on it with safety and shock resistance. At the same time, the accessory is very easy to install - it will not take you too long. The mount fits handlebars with a diameter of up to 31.8 mm and is compatible with most bicycle computers of well-known brands. Included Bike computer holderScrewdriverScrew x2Pad x2   ManufacturerCycplusModelZ1MaterialNylon + fiberLength115 mmDiameter of bicycle computer holder45 mmDiameter of handlebars31.8 mm

Cycplus Z3 bicycle computer holder The Cycplus Z3 mount allows you to stably mount your bicycle computer on the handlebars. It is made of 6061 aluminum alloy and fiberglass-reinforced nylon, and weighs only about 27g. Thanks to its well-thought-out design, it allows you to read data comfortably and stands out for its wide compatibility. In addition, you have two points for mounting accessories - for example, a sports camera or lighting. Compatibility with popular meters The mounting standard used is compatible with Garmin bike computers and other popular brands, such as IGPSPORT, XOSS or CYCPLUS. As a result, the mount can be easily matched to your meter - without the need for additional adapters. Adapted to integrated handlebars The design of the mount is designed to accommodate most integrated handlebars. Mounting is done in the central part, which preserves the aesthetic appearance of the bike's cockpit and ensures the stable seating of the meter. Once installed, the accessory is also gently extended forward, providing a natural and comfortable viewing angle for the computer screen. This position allows you to quickly read data while riding, improving safety and comfort. Mount additional accessories At the bottom of the mount, you will find two adapters that allow you to mount additional accessories, such as a sports camera or a bike light. So you can easily expand your kit for trips or workouts! Also available for sale separately is the ZD1 mount, which allows you to mount lights and recording equipment at the same time. Lightweight and durable design The slim, refined design and the use of high-grade 6061 aluminum alloy make the mount very durable, yet lightweight - it weighs only 27g. In addition, the fiberglass-reinforced nylon elements increase resistance to vibration and daily use, which translates into a stable hold on the meter even on uneven pavement.   ManufacturerCycplusModelZ3Material6061 aluminum alloy, fiberglass reinforced nylonWeight27 gCompatibilityGarmin, IGPSPORT, XOSS, CYCPLUS bicycle computers, etc.Compatible handlebarsIntegrated handlebarsAdditional mounting points2 lower points (for camera / lights)Dimensions138.5 x 41 x 8.2 mm

Cycplus Z4 Bike Computer Mount The Cycplus Z4 is a lightweight and durable bike computer mount with a Garmin-standard attachment, designed for handlebars with a diameter of 31.8 mm. Made of glass-fiber-reinforced nylon, it weighs just 44 g, and its 58 mm extended design ensures comfortable use even with larger bike computers. A standard GoPro adapter is located beneath the mount, allowing you to attach a compatible action camera or light. It is also possible to mount both of these accessories simultaneously using the optional Cycplus ZD1 extension adapter (sold separately). Rubber pads protect the handlebars from scratches, and stainless steel screws ensure durability and corrosion resistance. Stable design ensuring a secure mount The mount is made of glass-fiber-reinforced nylon, giving it high rigidity and resistance to daily wear and tear. The robust design effectively reduces vibrations caused by riding on uneven surfaces, resulting in a more stable position for the bike computer. This ensures the screen remains legible even during dynamic riding, making it easier to read the metrics. The material used is both lightweight and durable, making the mount ideal for both daily workouts and longer cycling trips. Extended arm for larger bike computers The design has been extended by 58 mm, allowing for comfortable use of bike computers equipped with larger displays. Placing the device at an appropriate distance from the stem improves screen visibility and makes it easier to quickly read data while riding. This solution works particularly well with larger models, such as the Garmin Edge 1040 or Edge 1050, but it’s just as compatible with other compatible bike computers. The extra space also helps keep the bike’s cockpit better organized and reduces the risk of collisions with cables or other accessories. Refined details for increased durability The Z4 model is equipped with rubber anti-slip pads that improve mounting stability while protecting the handlebars from scratches. The 304 stainless steel screws used are corrosion-resistant, ensuring the mount performs well even when riding in harsh weather conditions. Precise mounting ensures a secure hold for a compatible bike computer, minimizing the risk of it shifting while riding. All components are designed with durability and the convenience of everyday use in mind. Lightweight and Easy to Install Weighing just 44 g, the mount is lightweight and convenient for everyday use. The mount maintains compact dimensions, making it a good fit for modern road bikes, gravel bikes, and other models equipped with a 31.8 mm handlebar. The set includes all the components needed for installation, allowing you to quickly set up the mount without having to purchase additional tools. It’s a practical solution for those looking for a lightweight, sturdy, and functional bike computer mount. Included Cycplus Z4 mountMounting screws x 2Rubber washers x 22.5 mm Allen wrench3 mm Allen wrench   ManufacturerCycplusModelZ4CompatibilityGarmin Edge 1040/1050Handlebar mount diameter31.8 mmMaterialglass-fiber-reinforced nylonWeight44 gArm length58 mmOverall lengthapprox. 133 mmBottom mountGoPro standardRubber anti-slip padsyesScrews304 stainless steelColorblack

Cycplus Z7 Universal Tablet/Telephone Holder Cycplus Z7 is a universal mount designed for mounting a tablet or smartphone from 4.7 to 12.9 inches on an exercise bike. The construction based on high-grade aluminum alloy ensures high durability and wear resistance. The product is compatible with drop and flat handlebars (with a recommended clearance between the handlebar and the counter mount of more than 75mm). Easy installation and universal base The mount features a universal base compatible with most bicycle meter mounts, including Garmin, Wahoo, Coospo and Cycplus systems. This makes mounting very fast and intuitive.Note: the bicycle meter mount is not part of the kit - it must be purchased separately. Optimal tilt angle The mount offers a 30° tilt angle, which is ergonomic and comfortable for the eyes. Such a solution makes it easier to use training apps and riding simulators during workouts, providing greater convenience. Anti-slip pad The Z7 is equipped with a non-slip pad that increases friction and helps keep your phone or tablet stable. You don't have to worry about your device falling or sliding during your workout!Note: the mount does not have a locking mechanism, so it is recommended to use it only during indoor simulated workouts without violent steering wheel shocks. Compatibility with phones and tablets The Cycplus Z7 mount is compatible with devices with a display diagonal of 4.7 to 12.9 inches. As a result, it will work well with both compact smartphones and larger tablets, offering convenient access to the screen during workouts.   ManufacturerCycplusModelZ7Compatible devicesPhones and tablets with diagonal from 4.7 to 12.9 inchesCompatible mountsGarmin, Wahoo, Coospo, Cycplus and other standard meter mountsTilt angle30°MaterialAluminum alloy + siliconeRecommended handlebar-mount distanceAbove 75 mmDimensions135 x 112 mm

Joyroom JR-OK7 motorcycle phone holder The Joyroom JR-OK7 phone holder is the perfect choice for motorcyclists looking for functionality, safety and convenience while riding. Quick attachment, one-finger operation and 360-degree rotation provide comfort and full control of your phone. Thanks to its wide compatibility and robust design, this mount is the perfect solution for any motorcyclist. Hassle-free operation The Joyroom JR-OK7 features an innovative locking system that allows you to attach your phone in no time. Just open the holder in one motion and the phone is automatically locked. To remove the device, all you have to do is gently touch the release mechanism - a truly hassle-free operation while driving. Convenient use - one-handed operation Thanks to the one-handed operation feature, the Joyroom JR-OK7 holder provides full freedom while driving. Easy access to your phone makes using navigation, answering calls or controlling music extremely comfortable, without having to use both hands. 360-degree rotation The mount allows you to rotate your phone a full 360 degrees, giving you the ability to place your device in the optimal position - regardless of the angle at which you prefer to use your phone. This gives you the best view of the screen, making it more comfortable to use navigation or other apps while driving. A stable hold on your phone The Joyroom JR-OK7 provides a solid hold on your phone with its advanced locking system. The phone is firmly secured and protected from accidental drops or vibrations, making the holder safe even on bumpy roads. Wide compatibility and thoughtful design The holder is compatible with a wide range of phones from 68 to 93 mm wide. Thanks to the adjustable mount, it fits most motorcycles with handlebars with a diameter of 20 to 23 mm. The gadget is compatible with popular smartphone models, such as iPhone 13 Mini, iPhone SE3, iPhone 15 Pro Max or Samsung Galaxy S22 Ultra. Made of high-quality materials such as silicone, ABS and aluminum alloy, the holder is not only stable and durable, but also lightweight and aesthetically pleasing. Its minimalist design blends perfectly with the look of any motorcycle.   ManufacturerJoyroomModelJR-OK7ColorblackMaterialABS + silicone + aluminum alloyWeight151gSuitable phone size4.7-6.8 inches (68-93 mm)

PGYTECH handlebar mount (P-GM-171) Capture your next trip from an unusual perspective. The PGYTECH P-GM-171 mount allows you to stably mount your sports camera on the handlebars of your bicycle, motorcycle mirror and more. It also features a sturdy, durable design, and is very easy to install thanks to the patented CapLock system. The product also features wide compatibility, and is made of durable aluminum alloy. Unmatched stability Have peace of mind that the camera is securely attached to the steering wheel or mirror of your vehicle. The patented CapLock system allows you to quickly and reliably mount the equipment anywhere - even bumpy roads or sudden braking won't intimidate it. In addition, rubber elements increase friction and prevent rapid wear of the accessory, and the solid aluminum alloy construction guarantees durability and stability. Record from any angle Position the camera exactly the way you want and get an unusual perspective. The PGYTECH mount allows you to adjust the tilt angle up to 180° and rotates 360°. You can also lock it in the desired position to give your mounted device the stability it needs. Wide compatibility The clamp with an adjustable width of 17-37 mm allows you to easily mount the mount in various places - not only on the handlebars, but also, for example, on a mirror, on a handrail or on a thin branch. The accessory is also equipped with a ¼-inch screw, making it compatible with many sports cameras, phone holders and selfie sticks. Included MountCapLock quick release mountAdapter for sports camerasScrewTightening wrenchLanyardUser manual   ManufacturerPGYTECHNameSuper Clamp MountModelP-GM-171MaterialAluminum alloy, PA, rubberWeight272 gDimensions124 x 73 x 53 mmCompatibilitySports cameras, smartphones