Cables and chargers for electric cars

BESEN BN21 Portable Charger for Electric Cars The BESEN BN21 portable charger is a mobile solution designed for charging electric cars and plug-in hybrids. The device operates within a voltage range of 100–250 V AC, offers adjustable charging current from 6 A to 16 A, and delivers power up to 3.6 kW. It is equipped with a 2.6-inch color LCD display that shows the most important charging parameters. The BN21 model allows you to set a delayed start and charging time, and thanks to its IP66 rating, it can be used both indoors and outdoors. A built-in smart processor monitors the device’s operation and automatically corrects minor errors that occur during charging, ensuring the stability of the entire process. Adjustable Charging Current The charger allows you to adjust the current to match the capacity of the electrical installation and the user’s needs. The adjustment range from 6 A to 16 A ensures the device can operate under various power supply conditions. Additionally, to ensure the safety of both the electrical system and the user, charging starts at 6 A by default. Easy-to-read LCD display The 2.6-inch color screen allows you to monitor key charging parameters in real time. You can quickly check, among other things, the current, voltage, charging time, energy consumed, and the device’s operating status without needing to use additional apps. Charging Tailored to Your Schedule The delayed start function allows you to schedule the start of charging for a specific time. This is a convenient solution for those who use off-peak rates or want to have their car ready for a trip at a specific time. Additionally, the ability to set the charging time provides greater control over the charging process. Comprehensive safety features The BESEN BN21 is equipped with a range of protective systems that safeguard both the vehicle and the electrical system. The device protects against undervoltage, overload, short circuits, overheating, ground faults, and the effects of lightning strikes. The included Type A residual current device (RCD) with 6 mA DC detection further enhances safety during charging. Durable design for everyday use The robust housing is designed for use in demanding conditions. The IP66 rating protects the device from dust and water jets, allowing it to be used outdoors regardless of the weather. The design is also resistant to mechanical damage, including accidental being run over by car tires. Despite its robust construction, the charger remains compact and easy to handle. The control module measures just 6.7 × 5.2 × 19.6 cm and weighs 1.75 kg. This makes it easy to carry in the trunk and keep on hand while traveling. Convenient Power from a Household Outlet The charger is available in versions equipped with Type 1, Type 2, and GB/T connectors, allowing it to work with many electric car models on the market. The charger can be equipped with various types of power plugs. In the version intended for the Polish market, the most commonly used plug is the standard Schuko plug, which is compatible with traditional electrical outlets.   ManufacturerBESENModelBN21Device Typeportable EV chargerInput/Output Voltage100–250 V ACOperating Frequency47–63 HzMaximum Output Power3.6 kWMaximum Output Current16 A (1 phase)Display2.6" color LCDProtection ratingIP66Residual current deviceType A + 6 mA DCDelayed start functionYesCharging time settingYesLED indicatorYesOperating temperature–25°C to +55°C (according to CE certification)Operating humidity5%–95% non-condensingMaximum operating altitude< 2,000 m above sea levelCoolingnaturalStandby power consumption< 8 WControl module dimensions6.7 × 5.2 × 19.6 cmWeight1.75 kgCertificationsCE, RoHS

Besen BN70-BC-11KW-APP Portable Charger The Besen BN70-BC-11KW-APP is a smart, portable charger for electric vehicles that’s perfect for use at home, at work, and while traveling. It offers a charging power of up to 11 kW and a maximum current of 16 A, ensuring efficient charging in a variety of conditions. The easy-to-read LCD display shows key operating parameters, including power, voltage, current, and charging time, allowing you to conveniently monitor the entire process. Convenient charging management via the app Connect the charger to the dedicated app and monitor charging in real time. You can use scheduling, delayed start, and current adjustment features, making it easy to tailor the device’s operation to your daily routine. This solution helps you manage energy more effectively and enhances the convenience of using an electric vehicle. Safe operation in all conditions The charger is equipped with a comprehensive safety system that protects the device, the vehicle, and the electrical system. It includes protection against overcurrent, overvoltage, short circuits, ground faults, and overheating. The automatic shut-off feature in case of excessive heat enhances safety during extended charging sessions. Durable construction The housing, made of ASA+PC material, ensures high durability and resistance to daily use. The IP66 protection rating shields the charger from dust and water, making the device suitable for use both in the garage and outdoors. CE and RoHS certifications confirm compliance with international safety standards. The set also includes practical accessories, such as a carrying bag, a 3-phase to 1-phase adapter, and a set of mounting hardware, which make it easy to store and use the charger. Included: ChargerAdapterUser manualMetal mountMetal back panelMounting screwsRound carrying bag   ManufacturerBesenModelBN70-BC-11KW-APPMaximum charging power11 kWMaximum current16 AApp controlYesDisplayLCDProtection ratingIP66MaterialASA + PC

Besen BN70-BC-22KW-APP Portable Charger The Besen BN70-BC-22KW-APP is a smart, portable charger for electric vehicles that’s perfect for use at home, at work, and while traveling. It offers a charging power of up to 22 kW and a maximum current of 32 A, ensuring efficient charging in a variety of conditions. The easy-to-read LCD display shows key operating parameters, including power, voltage, current, and charging time, allowing the user to conveniently monitor the entire process. Convenient charging management via the app Connect the charger to the dedicated app and monitor charging in real time. You can use scheduling, delayed start, and current adjustment features, making it easy to adapt the device’s operation to your daily routine. This solution helps you manage energy more effectively and enhances the convenience of using an electric car. Safe operation in all conditions The charger is equipped with a comprehensive safety system that protects the device, the vehicle, and the electrical system. It includes protection against overcurrent, overvoltage, short circuits, ground faults, and overheating. The automatic shut-off feature in case of excessive heat enhances safety during extended charging sessions. Durable Construction The housing, made of ASA+PC material, ensures high durability and resistance to daily use. The IP66 rating protects the charger from dust and water, making the device suitable for use both in the garage and outdoors. CE and RoHS certifications confirm compliance with international safety standards. The set also includes practical accessories, such as a carrying bag, a 3-phase to 1-phase adapter, and a set of mounting hardware, which make it easy to store and use the charger conveniently. Included ChargerAdapterUser manualMetal bracketMetal back panelMounting screwsRound bag   ManufacturerBesenModelBN70-BC-22KW-APPMaximum charging power22 kWMaximum current32 AApp controlYesDisplayLCDIP ratingIP66MaterialASA + PC

Besen BS20 11kW APP Wall-Mounted Charger for Electric Vehicles The Besen BS20 is an advanced charger for electric vehicles, designed for a wide range of applications—from private garages to large commercial parking lots. With an output power of up to 11 kW, the charger ensures fast and efficient charging for various types of vehicles, including private cars, electric school buses, and ambulances. Thanks to various safety features and a carefully thought-out design, you can use it comfortably and safely. In addition, a dedicated app allows you to manage the BS20’s operation. Easy Installation and User-Friendly Interface The Besen BS20 charger is designed for ease of use and simple installation. Wall or floor mounting is quick and requires no complicated tools, making the device ideal for both home and commercial use. The 3.5-inch color LCD display provides the user with detailed information about the charging status, and the smart chip allows the charger to identify different electric vehicle models and adjust charging settings to specific needs. App-Based Control Download the EVSEMaster app, available on the App Store and Google Play, to take full advantage of the BS20’s capabilities. From the app, you can conveniently adjust your vehicle’s charging time, view your charging history, and update the software. You can also remotely start or stop the charging process—simply pair the device with your smartphone via Bluetooth. Enjoy the convenience that Besen offers. Durable Housing and Weather Resistance The housing of the Besen BS20 charger is made of durable PC+ABS plastic, which combines high mechanical strength with low weight. The design meets the IK10 standard, which means increased resistance to impacts and damage. Additionally, the IP66 rating protects the device from dust and water jets, allowing the charger to be safely used both in garages and at outdoor charging stations year-round. Advanced Safety Features The Besen BS20 is equipped with a range of advanced safety features, including protection against undervoltage, overload, short circuits, overheating, and lightning strikes. Additionally, the Type A and Type A+ 6mA DC RCD system provides protection against electric shock, further enhancing safety. Energy Efficiency and Optional Connectivity The Besen BS20 features low standby power consumption of less than 8 W, which contributes to energy savings and reduced operating costs. In addition, the charger offers optional connectivity via Ethernet, Wi-Fi, 4G, or Bluetooth, enabling remote monitoring and management of the device. Furthermore, CE, FCC, CSA, RoHS, and ETL certifications confirm that the product meets high safety and quality standards. Included in the package: ChargerUser manualFold-out quick start guidePositioning paperMounting screwsMetal hanger   ManufacturerBesenModelBS20Input voltage / Output voltageAC 230V / 400VInput frequency47 ~ 63 HzOutput power11 kWMax. output current32 AConnector typeSAE J1772, IEC 62196-2, GB/TCable length5 mProtection ratingIP66Housing materialPC+ABS engineering plasticImpact resistanceIK10Protection FeaturesUndervoltage protection / Overload protection / Short-circuit protection / Overheating protection / Lightning protectionRCDType A / Type A+6mA DCAmbient Temperature-25°C ~ 55°CAmbient humidity0–95% (non-condensing)Maximum altitude<2000 mStandby power consumption<8 WCertificationsCE/FCC/CSA/RoHS/ETLReal-time controlYesEthernet/Wi-Fi/4G/BluetoothOptionalLED indicatorYesLCD display3.5-inch color displayMounting methodWall-mounted / Floor-mountedDimensions295 x 195 x 65 mmWeight6–8 kgAppEVSEMaster

Besen BS20 22kW Wall-Mounted EV Charger The Besen BS20-BC-22KW is an advanced electric vehicle charger designed for a wide range of applications—from private garages to large commercial parking lots. Offering an output of up to 7.2 kW in single-phase mode and 22 kW in three-phase mode, the charger provides fast and efficient charging for various types of vehicles, including private cars, electric school buses, and electric ambulances. Thanks to various safety features and a carefully designed construction, you can use it comfortably and safely. Easy installation and user-friendly interface The Besen BS20-BC-22KW charger is designed for ease of use and installation. Wall or floor mounting is quick and requires no complicated tools, making the device ideal for both home and commercial use. The 3.5-inch color LCD display provides users with detailed information about the charging status, and the smart chip allows the device to identify different electric vehicle models and adjust charging settings to specific needs. Robust Construction and Weather Resistance The BS20-BC-22KW features a high-quality construction made of stainless steel and aluminum, ensuring durability and resistance to mechanical damage. The IK10 impact resistance rating confirms that the device is resistant to impacts and damage, which is crucial in commercial and outdoor environments. The IP66 rating guarantees complete resistance to dust and water, making this charger an ideal solution for outdoor use, regardless of weather conditions. Advanced Safety Features The Besen BS20-BC-22KW is equipped with a range of advanced safety features, including protection against undervoltage, overload, short circuits, overheating, and lightning strikes. Additionally, the Type A and Type A+6mA DC RCD system provides protection against electric shock, further enhancing safety. Energy Efficiency and Optional Connectivity The Besen BS20-BC-22KW features low standby power consumption of less than 8 W, contributing to energy savings and reduced operating costs. Additionally, the charger offers optional connectivity via Ethernet, Wi-Fi, 4G, or Bluetooth, enabling remote monitoring and management of the device. Furthermore, CE, FCC, CSA, RoHS, and ETL certifications confirm that the product meets high safety and quality standards. Included in the package: ChargerUser manualFold-out quick start guidePositioning paperMounting screwsMetal hanger   ManufacturerBesenModelBS20-BC-22KWInput voltage / Output voltageAC 230V / 400VInput frequency47 ~ 63 HzOutput power7.2 kW (single-phase) / 22 kW (three-phase)Max. output current32 AConnector typeSAE J1772, IEC 62196-2, GB/TCable length5 mProtection ratingIP66Impact resistanceIK10Protection FeaturesUndervoltage protection / Overload protection / Short-circuit protection / Overheating protection / Lightning protectionRCDType A / Type A + 6 mA DCAmbient Temperature-25°C ~ 55°CAmbient humidity0–95% (non-condensing)Maximum altitude<2000 mStandby power consumption<8 WCertificationsCE/FCC/CSA/RoHS/ETLReal-time controlYesEthernet/Wi-Fi/4G/BluetoothOptionalLED indicatorYesLCD display3.5-inch color displayMounting methodWall-mounted / Floor-mountedDimensions295 x 195 x 65 mmWeight6–8 kg

Besen BS20 22kW APP Wall-Mounted Electric Vehicle Charger The Besen BS20 is an advanced electric vehicle charger designed for a wide range of applications—from private garages to large commercial parking lots. Offering an output of up to 7.2 kW in single-phase mode and 22 kW in three-phase mode, the charger provides fast and efficient charging for various types of vehicles, including private cars, electric school buses, and ambulances. Thanks to various safety features and a carefully thought-out design, you can use it comfortably and safely. In addition, a dedicated app allows you to manage the BS20’s operation. Easy installation and user-friendly interface The Besen BS20 charger is designed for ease of use and simple installation. Wall or floor mounting is quick and requires no complicated tools, making the device ideal for both home and commercial use. The 3.5-inch color LCD display provides the user with detailed information about the charging status, and the smart chip allows the charger to identify different electric vehicle models and adjust charging settings to specific needs. App-Based Control Download the EVSEMaster app, available on the App Store and Google Play, and take full advantage of the BS20’s capabilities. From the app, you can conveniently adjust your vehicle’s charging time, view your charging history, and update the software. You can also remotely start or stop the charging process—simply pair the device with your smartphone via Bluetooth. Enjoy the convenience that Besen offers. Robust Construction and Weather Resistance The BS20 features a high-quality construction made of stainless steel and aluminum, ensuring durability and resistance to mechanical damage. The IK10 impact resistance rating confirms that the device is resistant to impacts and damage, which is crucial in commercial and outdoor environments. The IP66 rating guarantees complete resistance to dust and water, making this charger an ideal solution for outdoor use, regardless of weather conditions. Advanced Safety Features The Besen BS20 is equipped with a range of advanced safety features, including protection against undervoltage, overload, short circuits, overheating, and lightning strikes. Additionally, the Type A and Type A+ 6 mA DC RCD system provides protection against electric shock, further enhancing safety. Energy Efficiency and Optional Connectivity The Besen BS20 features low standby power consumption of less than 8 W, contributing to energy savings and reduced operating costs. In addition, the charger offers optional connectivity via Ethernet, Wi-Fi, 4G, or Bluetooth, enabling remote monitoring and management of the device. Furthermore, CE, FCC, CSA, RoHS, and ETL certifications confirm that the product meets high safety and quality standards. Included in the package: chargeruser manualfold-out quick start guidepositioning papermounting screwsmetal hanger   ManufacturerBesenModelBS20Input voltage / output voltageAC 230V / 400VInput frequency47 ~ 63HzOutput power7.2kW (single-phase) / 22kW (three-phase)Max. output current32 AConnector typeSAE J1772, IEC 62196-2, GB/TCable length5 mProtection ratingIP66Impact resistanceIK10Protection FeaturesUndervoltage protection / overload protection / short-circuit protection / overheat protection / lightning protectionRCDType A / Type A+6 mA DCAmbient Temperature-25°C ~ 55°CAmbient humidity0–95% (non-condensing)Maximum altitude<2000 mStandby power consumption<8 WCertificationsCE/FCC/CSA/RoHS/ETLReal-time controlYesEthernet/Wi-Fi/4G/BluetoothOptionalLED indicatorYesLCD display3.5-inch color displayMounting methodWall-mounted / Floor-mountedDimensions295 x 195 x 65 mmWeight6–8 kgAppEVSEMaster

BESEN SQW45-BC-22KW-APP EV Charger The BESEN SQW45-BC-22KW-APP is an advanced electric vehicle charging station with a power output of up to 22 kW, combining modern technology with intuitive operation and a high level of safety. It is suitable for both residential and commercial use, offering convenient control via an app and a clear, 3.5-inch color touchscreen display. Thanks to its well-thought-out design and extensive features, the user gains full control over the charging process and its parameters. Full Control via the Mobile App Charging is conveniently managed through a dedicated app. Users can monitor the charging status in real time, plan schedules, and analyze energy consumption data. This solution allows for better alignment of charging with daily needs and enhances the convenience of using an electric vehicle. Clear and intuitive touchscreen display The charging station is equipped with a 3.5-inch color touchscreen display that provides easy access to the most important information. On the screen, you can check the current charging status, energy consumption, and other key parameters. The intuitive interface makes operating the device simple and convenient, even for first-time users. Flexible installation to suit any space The charger can be mounted on a wall or a post, allowing you to adapt the installation to the available space. This is a practical solution for both individual users and businesses looking to set up a functional charging station in various locations. The simple installation process makes it easy to get the device up and running quickly. Advanced safety systems The BESEN SQW45-BC-22KW-APP is equipped with a comprehensive set of safety features that ensure the safety of both the user and the vehicle. The system protects against undervoltage, overload, short circuits, current leakage, overheating, and the effects of lightning strikes. This ensures stable and safe charging under various conditions. Included: ChargerUser manualFoldable quick-start guidePositioning paperMounting screws   ManufacturerBesenModelSQW45-BC-22KW-APPMaximum charging power22 kWApp-based controlYesDisplay3.5-inch color touchscreen

Besen LX30 22 kW Wall-Mounted Electric Car Charger (APP) The Besen LX30 is a modern wall-mounted charger for electric cars, offering a maximum charging power of 22 kW for three-phase charging and 7 kW for single-phase charging. Thanks to its support for a 230V/400V three-phase power system and a maximum current of 32A, users can significantly reduce the time needed to charge the battery. This solution is ideal for both electric vehicle owners and companies looking to optimize the charging process for their fleet. Robust Construction and Weather Resistance The device’s housing is made of high-quality PC+ABS plastic with an IP66 and IK10 rating, ensuring high resistance to mechanical damage and adverse weather conditions. With its compact dimensions of 264.5 × 235.8 × 124 mm, the Besen LX30 can be installed both in a garage and outdoors. The device weighs 5.5 kg, ensuring stability and durability even in demanding environments. Smart charging management via a mobile app The Besen LX30 charger works with the dedicated EVSEMaster APP, giving users full control over the charging process. The app allows users to set a charging schedule, monitor energy consumption, and view the device’s current status. Remote control capabilities allow users to optimize charging time and costs by adjusting them to electricity rates and their own needs. Advanced safety features for complete protection The Besen LX30 is equipped with a range of safety features that ensure safe operation. Protection against overheating, overloads, and voltage fluctuations safeguards both the vehicle and the electrical system. Thanks to its three-phase, five-wire system (L1, L2, L3, N, PE), the charger ensures a stable and efficient power supply. Convenience and Versatility With its standard charging connector, the Besen LX30 is compatible with a wide range of electric vehicles available on the market. The ability to configure charging parameters and its intuitive operation make it an ideal solution for private users, businesses, and public spaces alike. And the ability to install it anywhere you want in just 8 minutes adds to its much-desired versatility. The Perfect Investment in Electromobility The Besen LX30 is a modern, smart, and efficient wall-mounted charger that meets the needs of today’s electric vehicle users. Thanks to its robust construction, high charging power, and integration with a mobile app, the device ensures convenient and safe charging in all conditions. It’s an excellent choice for those looking for a reliable and technologically advanced solution for charging electric cars. Included in the set: ChargerUser manualFoldable card with quick start guidePositioning paperMounting screws   ManufacturerBesenModelLX30-22kW-APPHousing materialPC + ABC, plastic housingRouting modeLower incoming line, lower outgoing lineCharging interfaceCharging connectorDevice dimensions264.5 × 235.8 × 124 mmWeight5.5 kgInput voltage230V/400V AC Three-phase five-wire system (phase L1, phase L2, phase L3, neutral, PE)Input current32A MAXInput Frequency50 Hz/60 Hz

Besen SQ20-11KW-APP Wall-Mounted Electric Vehicle Charger The SQ20-APP is designed for wall mounting and is ideal for both residential and professional use. By connecting to the app via Bluetooth, you can remotely set the charging time and current, start and stop charging, and view your charging history at any time. Advanced technology and easy operation The charger is equipped with a 3.5-inch color LCD display that shows real-time charging parameters—time, voltage, current, temperature, and energy consumption. A built-in smart chip automatically diagnoses and corrects errors not related to hardware malfunctions, which enhances charging safety and reliability. You can also update the software via the app, allowing for easy implementation of new features. Safety and Compatibility The Wallbox SQ20-APP features a comprehensive set of safety protections: against overvoltage, overheating, overload, short circuits, ground faults, and lightning strikes. It supports SAE J1772, IEC 62196-2, and GB/T, making it compatible with most electric vehicles available on the market. The maximum charging current is 32 A, and the IP66-rated housing ensures resistance to dust and water. Included in the set: ChargerUser manualFold-out quick-start guidePositioning paperMounting screwsMetal hanger   ManufacturerBesenModelSQ20-11KW-APPOutput power11 kWMaximum current32 AFrequency47–63 HzCharging interfaceSAE J1772, IEC 62196-2, GB/TDisplay3.5” color LCDWater resistanceIP66Dimensions295 × 195 × 65 mmAmbient temperature-25°C ~ +55°CHumidity0–95% non-condensingMax. altitude<2000 mStandby power consumption<8WAppEVSEMaster

Besen SQ20-22KW-APP Wall-Mounted Electric Car Charger The SQ20-APP is designed for wall mounting and is ideal for both residential and professional use. By connecting to the app via Bluetooth, you can remotely set the charging time and current, start and stop charging, and view your charging history at any time. Advanced technology and easy operation The charger is equipped with a 3.5-inch color LCD display that shows real-time charging parameters—time, voltage, current, temperature, and energy consumption. A built-in smart chip automatically diagnoses and corrects errors not caused by hardware malfunctions, which enhances charging safety and reliability. You can also update the software via the app, allowing for easy implementation of new features. Safety and Compatibility The Wallbox SQ20-APP features a comprehensive set of safety protections: against overvoltage, overheating, overload, short circuits, ground faults, and lightning strikes. It supports SAE J1772, IEC 62196-2, and GB/T interfaces, making it compatible with most electric vehicles available on the market. The maximum charging current is 32 A, and the IP66-rated housing ensures resistance to dust and water. Included in the set: ChargerUser manualFoldable card with quick start guidePositioning paperMounting screwsMetal hanger   ManufacturerBesenModelSQ20-22KW-APPOutput power22 kWInput/output voltageAC 400V (3-phase)Maximum current32 AFrequency47–63 HzCharging interfaceSAE J1772, IEC 62196-2, GB/TDisplay3.5” color LCDWater resistanceIP66Weight8 kgDimensions295 × 195 × 65 mmAmbient temperature-25°C ~ +55°CHumidity0–95% non-condensingMax. altitude<2000 mStandby power consumption<8 WAppEVSEMaster

Besen SQ20-7KW-APP Wall-Mounted Electric Car Charger The SQ20-APP is designed for wall mounting and is ideal for both residential and professional use. By connecting to the app via Bluetooth, you can remotely set the charging time and current, start and stop charging, and view your charging history at any time. Advanced technology and easy operation The charger is equipped with a 3.5-inch color LCD display that shows real-time charging parameters—time, voltage, current, temperature, and energy consumption. A built-in smart chip automatically diagnoses and corrects errors not caused by hardware malfunctions, which enhances charging safety and reliability. You can also update the software via the app, allowing for easy implementation of new features. Safety and Compatibility The Wallbox SQ20-APP features a comprehensive set of safety protections: against overvoltage, overheating, overload, short circuits, ground faults, and lightning strikes. It supports SAE J1772, IEC 62196-2, and GB/T interfaces, making it compatible with most electric vehicles available on the market. The maximum charging current is 32 A, and the IP66-rated housing ensures resistance to dust and water. Included in the set ChargerUser manualFoldable card with quick start guidePositioning paperMounting screwsMetal hook   ManufacturerBesenModelSQ20-7KW-APPOutput power7.2 kWInput/output voltageAC 230V (1-phase)Maximum current32AFrequency47–63 HzCharging interfaceSAE J1772, IEC 62196-2, GB/TDisplay3.5” color LCDWater resistanceIP66Weight6 kgDimensions295 × 195 × 65 mmAmbient temperature-25°C ~ +55°CHumidity0–95% non-condensingMax. altitude<2000 mStandby power consumption<8WAppEVSEMaster

DEPOW Wallbox Electric Vehicle Charger The DEPOW Wallbox 11 kW electric vehicle charger with a 15-meter cable is a solution designed for convenient charging of electric vehicles at home, in the garage, or on your property. The device offers up to 11 kW of power, adjustable charging current ranging from 6 to 16 A, and support for both single-phase and three-phase installations, allowing you to tailor its operating parameters to the capabilities of your electrical system. The Wallbox is equipped with an LCD display, Wi-Fi and Bluetooth connectivity, and mobile app features such as remote start and stop of charging, real-time monitoring, a charging schedule, and a charging history. Current Control and Scheduled Charging The ability to adjust the current from 6 to 16 A allows you to tailor the charging load to current conditions and system parameters. The scheduling feature lets you plan charging for a specific time, so your car can be charged, for example, overnight or whenever it’s most convenient for you. You can monitor real-time information about the device’s operation on the LCD display without having to use your phone every time. Control via Wi-Fi and Bluetooth App Wi-Fi and Bluetooth connectivity expand the capabilities for controlling the DEPOW Wallbox via the app. Users can remotely start or stop charging, monitor the charging process in real time, and review the history of previous sessions. RFID support is also available, allowing users to control device activation and restrict access to the charger by unauthorized persons. Charging Safety Features The Wallbox is equipped with a 30 mA AC + 6 mA DC RCD and protection systems against, among other things, overload, overvoltage, undervoltage, leakage current, short circuits, and improper grounding. The device also monitors temperature, which helps reduce the risk of operation under unsuitable thermal conditions. The IP54 protection rating for the Wallbox housing and IP55 for the connected Type 2 connector allow the charger to be used both indoors and outdoors. Designed for everyday use The DEPOW device operates at 400 V AC and 50 Hz, with a maximum power consumption of 11 kW. The charger complies with the IEC 61851-1 and IEC 62196-2 standards and is CE-certified; its operating temperature range is from -25°C to 55°C. The 15-meter cable allows for easier connection of a car parked near the Wallbox, and LED indicators show power status, standby mode, charging status, and any device errors.   ManufacturerDEPOWModeldeWB11B15A_DLCable Length15 mMaximum Charging Power11 kWPower Supply400 V AC, 50 HzSupports1-phase and 3-phase installationsCurrent adjustment6–16 AConnectorType 2ConnectivityWi-Fi / BluetoothDisplayLCDRFID supportYesScheduled chargingYesRemote start and stop of chargingYesReal-time monitoringYesCharging historyYesWallbox protection ratingIP54Protection rating of the connected Type 2 connectorIP55RCDType B AC 30 mA + DC 6 mAProtectionsOvercurrent, overvoltage, undervoltage, earth leakage current, short circuit, improper grounding, and overheatingOperating temperature rangefrom -25°C to 55°CStorage temperature rangefrom -40°C to 80°COperating humidity5–95% RH, non-condensingTotal harmonic distortion (THD)≤5%Standby power consumption<5 WDimensions297 × 214 × 105 mmLED indicatorspower, standby, charging, errorIntended UseFor indoor and outdoor use

DEPOW Portable EV Charger The DEPOW 11 kW portable EV charger is a three-phase device operating at 400 V, designed to charge electric vehicles equipped with a Type 2 connector. The model operates in Mode 2 and allows the current to be adjusted to 6 A, 8 A, 10 A, 13 A, or 16 A, so charging parameters can be tailored to the capabilities of the electrical installation. The charger comes equipped with a 10-meter cable, an LCD display, LED indicators, and a scheduled charging function. It can be used both indoors and outdoors, making it suitable for use in a garage, on a driveway, or while traveling. Current Adjustment and Clear Operation Monitoring The ability to set the current to one of five levels allows you to adjust the charging method to the available power source. The LCD display makes it easy to monitor parameters and the device’s current operating status without the need for additional accessories. This is complemented by LEDs that indicate power, standby mode, charging, and errors, so the most important information is visible directly on the control box. Scheduled Charging and a 10-Meter Cable The scheduled charging feature lets you set the device to start operating at a convenient time, which can be useful, for example, when charging your car overnight. The Plug & Play design simplifies daily operation and allows you to quickly get the device ready for use. The 10-meter cable provides greater flexibility in positioning your car relative to the power source, which is especially practical on a driveway or in a larger garage. Comprehensive charging safeguards DEPOW is equipped with a 30 mA Type A RCD for AC current and a 6 mA protection for DC current, as well as protection against overload, overvoltage, undervoltage, leakage current, and short circuits. The device also monitors the grounding and temperature of the control box, reducing the risk of operation under abnormal conditions. Additionally, a relay welding detection function has been incorporated to identify malfunctions in this component. Suitable for indoor and outdoor use The control box has an IP66 rating, while the Type 2 plug meets IP55 requirements, increasing their resistance to dust and water. The charger can operate at temperatures ranging from -25°C to 50°C and at humidity levels from 5% to 95% RH without condensation. The storage temperature range is from -40°C to 80°C, while power consumption in standby mode does not exceed 5 W.   ManufacturerDEPOWModeldeM2D11B10NA_DLMaximum power11 kWPower supplythree-phaseVoltage400 V ACFrequency50 HzConnectorType 2Cable length10 mCurrent settings6 A / 8 A / 10 A / 13 A / 16 AApplicationindoor and outdoorControl box dimensions220 × 95 × 57 mmControl box protection ratingIP66Type 2 plug protection ratingIP55Operating temperaturefrom -25°C to 50°CStorage temperaturefrom -40°C to 80°COperating humidity5–95% RH, non-condensingTotal harmonic distortion (THD)≤5%Standby power consumption<5 WRCDType A 30 mA AC + 6 mA DCProtectionsovercurrent, overvoltage, undervoltage, ground fault, short circuit, and improper groundingAdditional protectioncontrol cabinet temperature monitoring and detection of relay contact stickingDisplayLCDLED indicatorspower, standby, charging, errorScheduled charging functionyes

DEPOW Portable EV Charger The DEPOW 11 kW portable EV charger is a three-phase device operating at 400 V, designed to charge electric vehicles equipped with a Type 2 connector. The model operates in Mode 2 and allows for current adjustment in the range of 6 A, 8 A, 10 A, 13 A, and 16 A, enabling charging parameters to be tailored to the capabilities of the electrical installation. The charger is equipped with a 15-meter cable, an LCD display, LED indicators, and a scheduled charging function. It can be used both indoors and outdoors, allowing you to use it in the garage, on the driveway, or while traveling. Current Adjustment and Easy-to-Read Operation Monitoring The ability to set the current to one of five levels allows you to tailor the charging method to the available power source. The LCD display makes it easy to monitor parameters and the device’s current operating status without the need for additional accessories. This is complemented by LEDs that indicate power, standby mode, charging, and errors, so the most important information is visible directly on the control box. Scheduled Charging and a 15-Meter Cable The scheduled charging feature allows you to set the device to start operating at a convenient time, which can be useful, for example, when charging your car overnight. The Plug & Play design simplifies daily operation and allows you to quickly set up the device for use. The 15-meter cable provides greater flexibility in positioning your car relative to the power source, which is particularly practical in a driveway or a larger garage. Comprehensive charging safeguards DEPOW is equipped with a 30 mA Type A RCD for AC current and a 6 mA safeguard for DC current, as well as protection against overload, overvoltage, undervoltage, ground fault current, and short circuits. The device also monitors the grounding and temperature of the control box, reducing the risk of operation under abnormal conditions. Additionally, a relay welding detection function has been implemented to identify malfunctions in this component. Suitable for indoor and outdoor use The control box has an IP66 rating, while the Type 2 connector meets IP55 requirements, which increases their resistance to dust and water. The charger can operate at temperatures ranging from -25°C to 50°C and at humidity levels from 5% to 95% RH without condensation. The storage temperature range is from -40°C to 80°C, while power consumption in standby mode does not exceed 5 W.   ManufacturerDEPOWModeldeM2D11B15A_DLMaximum power11 kWPower supplythree-phaseVoltage400 V ACFrequency50 HzConnectorType 2Cable length15 mCurrent settings6 A / 8 A / 10 A / 13 A / 16 AApplicationindoor and outdoorControl box dimensions220 × 95 × 57 mmControl box protection ratingIP66Type 2 plug protection ratingIP55Operating temperaturefrom -25°C to 50°CStorage temperaturefrom -40°C to 80°COperating humidity5–95% RH, non-condensingTotal harmonic distortion (THD)≤5%Standby power consumption<5 WRCDType A 30 mA AC + 6 mA DCProtectionsovercurrent, overvoltage, undervoltage, leakage current, short circuit, and improper groundingAdditional protectioncontrol cabinet temperature monitoring and detection of relay contact stickingDisplayLCDLED indicatorspower, standby, charging, errorScheduled charging functionyes

DEPOW Portable EV Charger The DEPOW 11 kW portable EV charger is a three-phase device operating at 400 V, designed for charging electric vehicles equipped with a Type 2 connector. The model operates in Mode 2 and allows for current adjustment in the range of 6 A, 8 A, 10 A, 13 A, and 16 A, enabling charging parameters to be tailored to the capabilities of the electrical installation. The charger is equipped with a 20-meter cable, an LCD display, LED indicators, and a scheduled charging function. It can be used both indoors and outdoors, allowing you to use it in a garage, on a driveway, or while traveling. Current Adjustment and Easy-to-Read Operation Monitoring The ability to set the current to one of five levels allows you to adjust the charging method to the available power source. The LCD display makes it easy to monitor the device’s parameters and current operating status without the need for additional accessories. This is complemented by LEDs that indicate power, standby mode, charging, and errors, so the most important information is visible directly on the control box. Scheduled Charging and a Long Cable The scheduled charging feature allows you to set the device to start operating at a convenient time, which can be useful, for example, when charging your car overnight. The Plug & Play design simplifies daily operation and allows you to quickly get the device ready for use. The 20-meter cable provides greater freedom in positioning the car relative to the power source, which is particularly practical in a driveway or a larger garage. Comprehensive charging safeguards DEPOW is equipped with a 30 mA Type A RCD for AC current and a 6 mA safeguard for DC current, as well as protection against overload, overvoltage, undervoltage, ground fault, and short circuits. The device also monitors the grounding and temperature of the control box, reducing the risk of operation under abnormal conditions. Additionally, a relay welding detection function has been implemented to identify malfunctions in this component. Suitable for indoor and outdoor use The control box has an IP66 rating, while the Type 2 plug meets IP55 requirements, which increases their resistance to dust and water. The charger can operate at temperatures ranging from -25°C to 50°C and at humidity levels from 5% to 95% RH without condensation. The storage temperature range is from -40°C to 80°C, while power consumption in standby mode does not exceed 5 W.   ManufacturerDEPOWModeldeM2D11B20A_DLMaximum power11 kWPower supplythree-phaseVoltage400 V ACFrequency50 HzConnectorType 2Cable Length20 mCurrent Rating6 A / 8 A / 10 A / 13 A / 16 AApplicationIndoor and outdoorControl box dimensions220 × 95 × 57 mmControl box protection ratingIP66Type 2 plug protection ratingIP55Operating temperaturefrom -25°C to 50°CStorage temperaturefrom -40°C to 80°COperating humidity5–95% RH, non-condensingTotal harmonic distortion (THD)≤5%Power consumption in standby mode<5 WRCDType A 30 mA AC + 6 mA DCProtectionovercurrent, overvoltage, undervoltage, leakage current, short circuit, and improper groundingAdditional protectioncontrol cabinet temperature monitoring and detection of relay contact stickingDisplayLCDLED indicatorspower, standby, charging, errorScheduled charging functionyes

DEPOW Portable EV Charger The DEPOW 11 kW portable EV charger is a three-phase device operating at 400 V, designed to charge electric vehicles equipped with a Type 2 connector. The model operates in Mode 2 and allows for current adjustment within the range of 6 A, 8 A, 10 A, 13 A, and 16 A, enabling charging parameters to be adapted to the capabilities of the electrical installation. The charger is equipped with a 7-meter cable, an LCD display, LED indicators, and a scheduled charging function. It can be used both indoors and outdoors, allowing you to use it in the garage, on the driveway, or while traveling. Current Adjustment and Clear Operational Monitoring The ability to set the current to one of five levels allows you to tailor the charging method to the available power source. The LCD display makes it easy to monitor parameters and the device’s current operating status without the need for additional accessories. This is complemented by LEDs that indicate power, standby mode, charging, and errors, so the most important information is visible directly on the control box. Scheduled Charging and a 7-Meter Cable The scheduled charging feature allows you to set the device to start operating at a convenient time, which can be useful, for example, when charging your car overnight. The Plug & Play design simplifies daily operation and allows you to quickly get the device ready for use. The 7-meter cable provides greater flexibility in positioning your car relative to the power source, which is especially practical in a driveway or a larger garage. Comprehensive charging safeguards DEPOW is equipped with a 30 mA Type A RCD for AC current and a 6 mA protection for DC current, as well as protection against overload, overvoltage, undervoltage, leakage current, and short circuits. The device also monitors the grounding and temperature of the control box, reducing the risk of operation under abnormal conditions. Additionally, a relay welding detection function (Relay Welding Inspection) has been implemented to identify malfunctions in this component. The charger is CE-certified and complies with the IEC 62196-2 and IEC 62752 standards. Suitable for indoor and outdoor use The control box has an IP66 rating, while the Type 2 plug meets IP55 requirements, which increases their resistance to dust and water. The charger can operate at temperatures ranging from -25°C to 50°C and at humidity levels from 5% to 95% RH without condensation. The storage temperature range is from -40°C to 80°C, while power consumption in standby mode does not exceed 5 W.   ManufacturerDEPOWModeldeM2D11B10Maximum Power11 kWPower SupplyThree-phaseVoltage400 V ACFrequency50 HzConnectorType 2Cable Length7 mCurrent Setting6 A / 8 A / 10 A / 13 A / 16 AApplicationIndoor and outdoorControl box dimensions220 × 95 × 57 mmControl box protection ratingIP66Type 2 connector protection ratingIP55Operating temperaturefrom -25°C to 50°CStorage temperaturefrom -40°C to 80°COperating humidity5–95% RH, non-condensingTotal harmonic distortion (THD)≤5%Power consumption in standby mode<5 WRCDType A 30 mA AC + 6 mA DCProtectionsovercurrent, overvoltage, undervoltage, leakage current, short circuit, and improper groundingAdditional protectioncontrol box temperature monitoring and detection of relay contact stickingDisplayLCDLED indicatorspower, standby, charging, errorScheduled charging functionyes

DEPOW Portable EV Charger The DEPOW portable EV charger, with a power output of up to 22 kW, is equipped with a 10-meter cable and a Type 2 connector, providing flexibility when connecting the car to a power source. The device supports 1- and 3-phase charging in Mode 2 and allows current adjustment from 6 to 32 A. Users also have access to an LCD display, Wi-Fi and Bluetooth connectivity, app-based control, and a charging scheduling feature. The charger is designed for both indoor and outdoor use, and its control box has an IP66 rating. Current Adjustment Tailored to the Electrical System The ability to adjust the current allows users to tailor the charging process to the capabilities of their electrical system and their current needs. You can choose from 6 A, 10 A, 13 A, 16 A, 20 A, 24 A, and 32 A. This allows users to limit current draw when the electrical system does not allow for full use of the charger’s capabilities. The LCD display makes it easy to monitor key parameters and the device’s current operating status. Control via Wi-Fi and Bluetooth App The charger can connect to a mobile app via Wi-Fi or Bluetooth, making it easy to manage the charging process. From the app, you can remotely start and stop a charging session, monitor the device’s operation in real time, view the charging history, and set a schedule for specific times. The “RFID Toggle” feature, which in this model refers to digital authorization or session locking within the app, rather than a physical RFID card reader. This allows you to prevent unauthorized charging by configuring the feature appropriately in the app. Safety Features for Daily Use The DEPOW device is equipped with safety features that monitor, among other things, overload, overvoltage and undervoltage, leakage current, short circuits, grounding, and the temperature of the control box. The built-in RCD Type A 30 mA AC + 6 mA DC protection detects abnormalities related to both alternating current and direct current components. Temperature control further helps protect the device during extended charging sessions. LED indicators show power status, standby mode, charging in progress, and error conditions. Designed for Various Conditions The control box has an IP66 protection rating, and the Type 2 plug has an IP55 rating, which increases the kit’s resistance to dust and water exposure. The device can operate at temperatures ranging from -25°C to 50°C and at relative humidity levels from 5% to 95% RH without condensation. Power consumption in standby mode is less than 5 W, while total harmonic distortion (THD) does not exceed 5%.   ManufacturerDEPOWModeldeM2D22B10_DLMaximum power22 kWCharging typeSingle-phase / 3-phase, Mode 2Voltage400 V AC, 50 HzConnectorType 2Cable Length10 mCurrent Control6 A / 10 A / 13 A / 16 A / 20 A / 24 A / 32 ADisplayLCDConnectivityWi-Fi, BluetoothApp featuresremote start/stop, real-time monitoring, current adjustment, charging schedule, charging history, digital authorization/lock “RFID Toggle”RCDType A 30 mA AC + 6 mA DCProtectionsoverload, overvoltage and undervoltage, ground fault current, short circuit, ground check, temperature monitoringControl box protection ratingIP66Type 2 plug protection ratingIP55Operating temperature-25°C to 50°CStorage temperature-40°C to 80°COperating humidity5–95% RH, non-condensingTHD≤5%Standby power consumption<5 WControl box dimensions238 × 115 × 69 mmApplicationIndoors and outdoors

DEPOW Portable EV Charger The DEPOW 3.7 kW portable EV charger is a single-phase Mode 2 device designed for charging electric vehicles at home and while traveling. It offers current adjustment in the range of 6–16 A, control via an app and a touch button, as well as scheduled and delayed charging functions. The 10-meter-long cable makes it easy to connect your car even when the outlet is located farther away from your parking spot, while the control module’s IP66 protection rating allows you to use the device outdoors as well. Current Adjustment: 6–16 A The ability to adjust the current allows you to tailor the charging process to the capacity of your electrical system. Using the touch button, you can select 6 A, 8 A, 10 A, 13 A, or 16 A, while the app allows for smooth adjustment within the 6–16 A range. This helps reduce the load on the electrical system when other electrical devices are in use at the same time. App Control and Charging Scheduling The DEPOW charger can be operated directly from the control module or via the app. The scheduling and delayed-start features let you set a convenient time to start charging, so your car can be charged according to your personal schedule. The multifunctional LED display makes it easy to monitor the device’s operation, and the three-color indicator lights provide information about power supply, ongoing charging, and any errors. Charging Safety Features The charger is equipped with a 30 mA Type A RCD and 6 mA DC current protection. Among other things, the device monitors for excessively high or low voltage, overload, continuity of the PE protective conductor, and proper relay operation. The relay contact welding detection feature can additionally block charging if an abnormality is detected. Temperature Control The DEPOW device monitors the temperature of the cable at the power plug, as well as the temperature of the relay or internal components. When the temperature exceeds 70°C, the charger limits the current to 6 A, reducing the load during operation. If the temperature exceeds 75°C, the charging process is stopped, which provides additional protection for the device and the electrical system. Designed for indoor and outdoor use The control module has an IP66 rating, making it protected against dust and powerful water jets. The charger can operate at temperatures ranging from -25°C to 50°C and is designed for both indoor and outdoor use. DEKRA certification, the compact dimensions of the control module (176 × 93 × 49 mm), and a 10-meter cable make the device suitable for both everyday home use and as a portable charger for travel.   ManufacturerDEPOWModeldeM2D03B10A_DLTypeportable EV Mode 2 chargerPower Supplysingle-phasePowerup to 3.7 kWCurrent Control6–16 AButton adjustment6 A / 8 A / 10 A / 13 A / 16 AApp adjustmentcontinuous, 6–16 AOperating voltage85–280 V ACFrequency50 Hz ±2%Controlapp and touch buttonTimed functionscharging schedule and delayed startRCDType A 30 mA + DC 6 mAControl module protection ratingIP66Operating temperature-25°C to 50°CStorage temperature-40°C to 80°CMaximum operating altitude≤2000 mAmbient humidity<93% RH ±3% RHTemperature controlpower plug and internal components/relayThermal protectioncurrent limiting above 70°C, charging stop above 75°CPE wire continuity checkYesRelay stick detectionYesLED indicatorThree-colorControl module dimensions176 × 93 × 49 mmCable length10 mApplicationIndoors and outdoors

DEPOW Portable EV Charger The DEPOW 3.7 kW portable EV charger is a single-phase Mode 2 device designed for charging electric vehicles at home and while traveling. It offers current adjustment in the range of 6–16 A, control via an app and a touch button, as well as scheduled and delayed charging functions. The 15-meter cable makes it easy to connect your car even when the outlet is located farther away from the parking spot, while the control module’s IP66 protection rating allows the device to be used outdoors as well. Current Adjustment: 6–16 A The adjustable current allows you to tailor the charging process to the capabilities of your electrical system. Using the touch button, you can select 6 A, 8 A, 10 A, 13 A, or 16 A, while the app allows for continuous adjustment within the 6–16 A range. This helps reduce the load on the electrical system when other electrical devices are in use at the same time. App Control and Charging Scheduling The DEPOW charger can be operated directly from the control module or via the app. The scheduling and delayed-start functions let you set a convenient time to start charging, so your car can be charged according to your personal schedule. The multifunctional LED display makes it easy to monitor the device’s operation, and the three-color indicator lights show power status, ongoing charging, and any errors. Charging Safety Features The charger is equipped with a 30 mA Type A RCD and 6 mA DC current protection. Among other things, the device monitors for overvoltage and undervoltage, overload, continuity of the PE protective conductor, and proper relay operation. The relay contact welding detection feature can additionally block charging if an anomaly is detected. Temperature Control The DEPOW device monitors the temperature of the cable at the power plug and the temperature of the relay or components located inside the device. When the temperature exceeds 70°C, the charger limits the current to 6 A, reducing the load during operation. If the temperature exceeds 75°C, the charging process is stopped, which provides additional protection for the device and the electrical system. Designed for indoor and outdoor use The control module has an IP66 rating, making it protected against dust and powerful water jets. The charger can operate at temperatures ranging from -25°C to 50°C and is designed for both indoor and outdoor use. DEKRA certification, the compact dimensions of the control module (176 × 93 × 49 mm), and a 15-meter cable make the device suitable for both everyday use at home and as a portable charger to take on trips.   ManufacturerDEPOWModeldeM2D03B15A_DLTypeportable Mode 2 EV chargerPower supplysingle-phasePowerup to 3.7 kWCurrent adjustment6–16 AButton-based adjustment6 A / 8 A / 10 A / 13 A / 16 AApp-based adjustmentcontinuous, 6–16 AOperating voltage85–280 V ACFrequency50 Hz ±2%Controlapp and touch buttonTimed functionscharging schedule and delayed startRCDType A 30 mA + DC 6 mAControl module protection ratingIP66Operating temperature-25°C to 50°CStorage temperature-40°C to 80°CMaximum operating altitude≤2000 mAmbient humidity<93% RH ±3% RHTemperature controlpower plug and internal components/relayThermal protectioncurrent limit above 70°C, charging stop above 75°CPE wire continuity checkYesRelay sticking detectionYesLED indicatorThree-colorControl module dimensions176 × 93 × 49 mmCable length15 mApplicationIndoors and outdoors

DEPOW Portable EV Charger The DEPOW 3.7 kW portable EV charger is a single-phase Mode 2 device designed for charging electric vehicles at home and while traveling. It offers current adjustment in the range of 6–16 A, control via an app and a touch button, as well as scheduled and delayed charging functions. The 20-meter cable makes it easy to connect your car even when the outlet is located farther away from your parking spot, while the control module’s IP66 rating allows you to use the device outdoors as well. Current adjustment: 6–16 A The adjustable current allows you to tailor the charging process to the capacity of your electrical system. Using the touch button, you can select 6 A, 8 A, 10 A, 13 A, or 16 A, while the app allows for smooth adjustment within the 6–16 A range. This helps reduce the load on the electrical system when other electrical devices are in use at the same time. App Control and Charging Scheduling The DEPOW charger can be operated directly from the control module or via the app. The scheduling and delayed-start functions let you set a convenient time to start charging, so your car can be charged according to your individual schedule. The multifunctional LED display makes it easy to monitor the device’s operation, and the three-color indicator lights provide information about power supply, ongoing charging, and any errors. Charging Safety Features The charger is equipped with a 30 mA Type A RCD and 6 mA DC current protection. Among other things, the device monitors for overvoltage and undervoltage, overload, continuity of the PE protective conductor, and proper relay operation. The relay contact welding detection feature can additionally block charging if an anomaly is detected. Temperature Control The DEPOW device monitors the temperature of the power cord near the power plug, as well as the temperature of the relay or internal components. When the temperature exceeds 70°C, the charger limits the current to 6 A, reducing the load during operation. If the temperature exceeds 75°C, the charging process is stopped, which provides additional protection for the device and the electrical system. Designed for indoor and outdoor use The control module has an IP66 rating, making it protected against dust and powerful water jets. The charger can operate at temperatures ranging from -25°C to 50°C and is designed for both indoor and outdoor use. DEKRA certification, the compact dimensions of the control module (176 × 93 × 49 mm), and a 20-meter cable make the device suitable for both everyday use at home and as a portable charger for travel.   ManufacturerDEPOWModeldeM2D03B20A_DLTypeportable Mode 2 EV chargerPower supplysingle-phasePowerup to 3.7 kWCurrent adjustment6–16 AButton adjustment6 A / 8 A / 10 A / 13 A / 16 AApp adjustmentcontinuous, 6–16 AOperating voltage85–280 V ACFrequency50 Hz ±2%Controlapp and touch buttonTimed functionscharging schedule and delayed startRCDType A 30 mA + DC 6 mAControl module protection ratingIP66Operating temperature-25°C to 50°CStorage temperature-40°C to 80°CMaximum operating altitude≤2000 mAmbient humidity<93% RH ±3% RHTemperature monitoringpower plug and internal components/relayThermal protectioncurrent limiting above 70°C, charging stop above 75°CPE wire continuity checkYesRelay sticking detectionYesLED indicatorThree-colorControl module dimensions176 × 93 × 49 mmCable length20 mApplicationIndoors and outdoors

DEPOW Portable EV Charger The DEPOW 3.7 kW portable EV charger is a single-phase Mode 2 device designed for charging electric vehicles at home and while traveling. It offers current adjustment in the range of 6–16 A, control via an app and a touch button, as well as scheduled and delayed charging functions. The 7-meter-long cable makes it easy to connect your car even when the outlet is located some distance from your parking spot, while the control module’s IP66 rating allows the device to be used outdoors as well. Current Adjustment: 6–16 A The ability to adjust the current allows you to tailor the charging process to the capacity of your electrical system. Using the touch button, you can select 6 A, 8 A, 10 A, 13 A, or 16 A, while the app allows for smooth adjustment within the 6–16 A range. This helps limit the load on the electrical system when other electrical devices are in use at the same time. App Control and Charging Scheduling The DEPOW charger can be operated directly from the control module or via the app. The scheduling and delayed-start features let you set a convenient time to start charging, so your car can be charged according to your personal schedule. The multifunctional LED display makes it easy to monitor the device’s operation, and the three-color indicator lights provide information about power supply, ongoing charging, and any errors. Charging Safeguards The charger is equipped with a 30 mA Type A RCD and 6 mA DC current protection. Among other things, the device monitors for overvoltage and undervoltage, overload, continuity of the PE protective conductor, and proper relay operation. The relay contact welding detection feature can additionally block charging if an abnormality is detected. Temperature Control The DEPOW device monitors the temperature of the cable at the power plug and the temperature of the relay or components located inside the device. When the temperature exceeds 70°C, the charger limits the current to 6 A, reducing the load during operation. If the temperature exceeds 75°C, the charging process is stopped, which provides additional protection for the device and the electrical system. Designed for indoor and outdoor use The control module has an IP66 rating, making it protected against dust and powerful water jets. The charger can operate at temperatures ranging from -25°C to 50°C and is designed for both indoor and outdoor use. DEKRA certification, the compact dimensions of the control module (176 × 93 × 49 mm), and a 7-meter-long cable make the device suitable for both everyday home use and as a portable charger for travel.   ManufacturerDEPOWModeldeM2D03B7NA_DLTypeportable EV Mode 2 chargerPower supplysingle-phasePowerup to 3.7 kWCurrent adjustment6–16 AButton adjustment6 A / 8 A / 10 A / 13 A / 16 AApp adjustmentcontinuous, 6–16 AOperating voltage85–280 V ACFrequency50 Hz ±2%Controlapp and touch buttonTimed functionscharging schedule and delayed startRCDType A 30 mA + DC 6 mAControl module protection ratingIP66Operating temperature-25°C to 50°CStorage temperature-40°C to 80°CMaximum operating altitude≤2000 mAmbient humidity<93% RH ±3% RHTemperature monitoringpower plug and internal components/relayThermal protectioncurrent limiting above 70°C, charging stop above 75°CPE wire continuity checkYesRelay sticking detectionYesLED indicatorThree-colorControl module dimensions176 × 93 × 49 mmCable length7 mApplicationIndoors and outdoors

DEPOW Portable EV Charger, 22 kW, 7 m The DEPOW portable EV charger, with a power output of up to 22 kW, is equipped with a 7-meter cable and a Type 2 connector, providing flexibility when connecting your car to a power source. The device supports 1- and 3-phase charging in Mode 2 and allows current adjustment from 6 to 32 A. Users also have access to an LCD display, Wi-Fi and Bluetooth connectivity, app-based control, and a charging scheduling feature. The charger is designed for both indoor and outdoor use, and its control box has an IP66 rating. Current Adjustment Tailored to the Electrical System The ability to adjust the current allows users to tailor the charging process to the capabilities of their electrical system and their current needs. You can choose from 6 A, 10 A, 13 A, 16 A, 20 A, 24 A, and 32 A. This allows the user to limit current draw when the electrical installation does not allow for full use of the charger’s capabilities. The LCD display makes it easy to monitor key parameters and the device’s current operating status. Control via Wi-Fi and Bluetooth App The charger can connect to a mobile app via Wi-Fi or Bluetooth, making it easy to manage the charging process. From the app, you can remotely start and stop a charging session, monitor the device’s operation in real time, view the charging history, and set a schedule for specific times. The “RFID Toggle” feature, which in this model refers to digital authorization or session locking within the app, rather than a physical RFID card reader. This helps prevent unauthorized charging by configuring the feature appropriately in the app. Safety Features During Daily Use The DEPOW device is equipped with safety features that monitor, among other things, overload, overvoltage and undervoltage, leakage current, short circuits, grounding, and the temperature of the control box. The built-in RCD Type A 30 mA AC + 6 mA DC protection detects abnormalities related to both alternating current and direct current components. Temperature control further helps protect the device during extended charging. LED indicators show power status, standby mode, charging in progress, and any errors. Designed for Various Conditions The control box has an IP66 protection rating, and the Type 2 plug has an IP55 rating, which increases the kit’s resistance to dust and water exposure. The device can operate at temperatures ranging from -25°C to 50°C and at relative humidity levels from 5% to 95% RH without condensation. Power consumption in standby mode is less than 5 W, while total harmonic distortion (THD) does not exceed 5%. Included in the set DEPOW 22 kW portable EV charger with a 7 m cableType 2 vehicle connector5-pin CEE power plugCEE adapter for powering from an industrial outletSchuko adapter for connection to a standard 230 V outletWall mount for Type 2 plugWall mount for cableMounting hardwareCable tieCleaning clothCarrying bag   ManufacturerDEPOWModeldeM2D22B7D_DLMaximum power22 kWCharging typeSingle-phase / 3-phase, Mode 2Voltage400 V AC, 50 HzConnectorType 2Cable length7 mCurrent control6 A / 10 A / 13 A / 16 A / 20 A / 24 A / 32 ADisplayLCDConnectivityWi-Fi, BluetoothApp Featuresremote start/stop, real-time monitoring, current adjustment, charging schedule, charging history, digital authorization/lock “RFID Toggle”RCDType A 30 mA AC + 6 mA DCProtectionsoverload, overvoltage and undervoltage, ground fault current, short circuit, ground check, temperature controlControl box protection ratingIP66Type 2 plug protection ratingIP55Operating temperature-25°C to 50°CStorage temperature-40°C to 80°COperating humidity5–95% RH, non-condensingTHD≤5%Standby power consumption<5 WControl box dimensions238 × 115 × 69 mmApplicationIndoors and outdoors

DEPOW Wallbox Electric Car Charger The DEPOW Wallbox electric car charger (11 kW) with a 7-meter cable is a solution designed for convenient charging of electric cars at home, in the garage, or on your property. The device offers up to 11 kW of power, adjustable charging current ranging from 6 to 16 A, and support for both single-phase and three-phase installations, allowing you to tailor its operating parameters to your electrical system’s capabilities. The Wallbox is equipped with an LCD display, Wi-Fi and Bluetooth connectivity, and mobile app features such as remote start and stop of charging, real-time monitoring, scheduling, and charging history. Current Control and Scheduled Charging The ability to adjust the current from 6 to 16 A allows you to tailor the load to current conditions and the system’s specifications. The scheduling feature lets you plan charging for a specific time, so your car can be recharged, for example, overnight or whenever it’s most convenient for you. You can monitor real-time information about the device’s operation on the LCD display without having to use your phone every time. Control via Wi-Fi and Bluetooth App Wi-Fi and Bluetooth connectivity expand the capabilities for controlling the DEPOW Wallbox via the app. Users can remotely start or stop charging, monitor the charging process in real time, and review the history of previous sessions. RFID support is also available, allowing you to control when the device is activated and restrict unauthorized use of the charger. Charging Safety Features The Wallbox is equipped with a 30 mA AC + 6 mA DC RCD and protection systems against, among other things, overload, overvoltage, undervoltage, leakage current, short circuits, and improper grounding. The device also monitors temperature, which helps reduce the risk of operation under unsuitable thermal conditions. The IP54 protection rating for the Wallbox housing and IP55 for the connected Type 2 connector allow the charger to be used both indoors and outdoors. Designed for everyday use The DEPOW device operates at 400 V AC and 50 Hz, with a maximum power consumption of 11 kW. The charger complies with the IEC 61851-1 and IEC 62196-2 standards and is CE-certified; its operating temperature range is from -25°C to 55°C. The 7-meter cable allows for easier connection of a car parked near the Wallbox, and LED indicators show power supply status, standby mode, charging status, and any device errors.   ManufacturerDEPOWModeldeWB11B05A_DLCable length7 mMaximum charging power11 kWPower supply400 V AC, 50 HzSupports1-phase and 3-phase installationsCurrent control6–16 AConnectorType 2ConnectivityWi-Fi / BluetoothDisplayLCDRFID supportYesScheduled chargingYesRemote start and stop of chargingYesReal-time monitoringYesCharging historyYesWallbox protection ratingIP54Protection rating of the connected Type 2 connectorIP55RCDType B AC 30 mA + DC 6 mAProtectionsOvercurrent, overvoltage, undervoltage, earth leakage, short circuit, improper grounding, and overheatingOperating temperature rangefrom -25°C to 55°CStorage temperature rangefrom -40°C to 80°COperating humidity5–95% RH, non-condensingTotal harmonic distortion (THD)≤5%Standby power consumption<5 WDimensions297 × 214 × 105 mmLED indicatorspower, standby, charging, errorIntended UseFor indoor and outdoor use

DEPOW Wallbox Wall-Mounted EV Charger The DEPOW Wallbox 11 kW wall-mounted EV charger with a 10-meter cable is a solution designed for convenient charging of electric vehicles at home, in the garage, or on your property. The device offers up to 11 kW of power, adjustable charging current ranging from 6 to 16 A, and support for both single-phase and three-phase installations, allowing you to tailor its operating parameters to the capabilities of your electrical system. The Wallbox is equipped with an LCD display, Wi-Fi and Bluetooth connectivity, and mobile app features such as remote start and stop of charging, real-time monitoring, scheduling, and charging history. Current Control and Scheduled Charging The ability to adjust the current from 6 to 16 A allows you to tailor the load to current conditions and system parameters. The scheduling feature allows you to plan charging for a specific time, so your car can be charged, for example, overnight or whenever it’s most convenient for you. You can monitor real-time information about the device’s operation on the LCD display, without having to use your phone every time. Control via Wi-Fi and Bluetooth App Wi-Fi and Bluetooth connectivity expand the possibilities for controlling the DEPOW Wallbox using the app. Users can remotely start or stop charging, monitor the charging process in real time, and review the history of previous sessions. RFID support is also available, allowing you to control when the device starts and restrict access to the charger by unauthorized users. Charging Safety Features The Wallbox is equipped with an RCD (residual current device) rated at 30 mA AC + 6 mA DC, as well as protection systems against, among other things, overloads, overvoltage, undervoltage, leakage current, short circuits, and improper grounding. The device also monitors temperature, which helps reduce the risk of operation under unsuitable thermal conditions. The IP54 protection rating for the Wallbox housing and IP55 for the connected Type 2 connector allow the charger to be used both indoors and outdoors. Designed for everyday use The DEPOW device operates at 400 V AC and 50 Hz, with a maximum power consumption of 11 kW. The charger complies with the IEC 61851-1 and IEC 62196-2 standards and is CE-certified, with an operating temperature range of -25°C to 55°C. The 10-meter cable allows for easier connection of a car parked near the Wallbox, and LED indicators show power supply status, standby mode, charging status, and any device errors.   ManufacturerDEPOWModeldeWB11B10A_DLCable Length10 mMaximum Charging Power11 kWPower Supply400 V AC, 50 HzSupports1-phase and 3-phase installationsCurrent adjustment6–16 AConnectorType 2ConnectivityWi-Fi / BluetoothDisplayLCDRFID supportYesScheduled chargingYesRemote start and stop of chargingYesReal-time monitoringYesCharging historyYesWallbox IP ratingIP54IP rating of the connected Type 2 connectorIP55RCDType B AC 30 mA + DC 6 mAProtectionsOvercurrent, overvoltage, undervoltage, ground fault, short circuit, improper grounding, and overheatingOperating temperature rangefrom -25°C to 55°CStorage temperature rangefrom -40°C to 80°COperating humidity5–95% RH, non-condensingTotal harmonic distortion (THD)≤5%Standby power consumption<5 WDimensions297 × 214 × 105 mmLED indicatorspower, standby, charging, errorIntended Usefor indoor and outdoor use