Pool cleaning equipment

Bublue Bubot 300P Pool Cleaning Robot The Bublue Bubot 300P is a modern pool cleaning robot designed to remove debris from the bottom and clean near the walls—without the need for manual intervention. Thanks to its high power (33 W), it effectively removes sand, leaves, and small debris in a single cycle. It operates wirelessly for up to 90 minutes, and fast charging means it’s ready for the next cycle in about 3 hours. The DirtLock™ Tech 2.0 system effectively traps debris in the filter basket, while intelligent wall detection helps it navigate. Additionally, the self-parking feature allows you to conveniently remove the robot once it has finished working. The unit is complemented by LED lights that indicate the device’s status. Bluehole Technology™ – effectiveness visible after a single cycle The new Bluehole Technology™ is responsible for the high cleaning effectiveness, as it optimizes the interaction between the nozzle, motor, and suction impeller. This translates to up to twice the overall performance compared to previous solutions, as well as 3× better leaf collection efficiency and 8.5× higher efficiency in removing debris ranging from 3 to 8 mm in size (compared to the previous generation). As a result, a single cleaning cycle is enough to restore cleanliness without the need for manual vacuuming or repeatedly restarting the device. Smart sensors, autonomous docking, and clear LED indicators The Bublue Bubot 300P pool robot is designed for maximum user convenience, which is why it uses advanced contact sensors that enable quick and precise responses to pool walls. The Corner Boost™ technology increases cleaning intensity in corners, offering up to twice the dirt removal efficiency in these critical areas. Upon contact with the edge, the robot automatically corrects its path, moving smoothly and without erratic bounces, which results in smoother and more effective cleaning of the pool floor. After completing a cycle, the device autonomously docks against the pool wall, making it quick and convenient to remove from the water. In addition, built-in LEDs provide real-time information on the device’s operating status, charge level, and readiness. Dual Filtration and DirtLock™ The dual filtration system combines two filter levels with 80- and 150-mesh density, effectively capturing both larger debris such as leaves and fine sand or sediment. This solution increases average suction efficiency by up to 15% and helps maintain cleaner water throughout the entire operating cycle. This is complemented by DirtLock™ technology, which allows water to be quickly drained from the robot in about 5 seconds, reducing maintenance time by up to 80% and preventing nearly 100% of collected debris from flowing back into the pool. Additionally, the optimized basket design provides up to 30% more capacity compared to standard solutions, meaning longer operation without the need for frequent emptying. Precise component coordination – stable suction power throughout the entire operating cycle In the Bublue Bubot 300P model, the optimized suction system plays a key role, with the nozzle, motor, and impeller operating in full synchronization. This design allows for smooth flow of water and debris throughout the system, without power loss or sudden drops in performance. The precise alignment of these components ensures stable, effective suction of both fine particles and larger debris—regardless of how dirty the pool floor is. The result is consistent robot operation, improved energy efficiency, and consistently high cleaning performance from start to finish. Long runtime and fast charging – ready to clean whenever you need it The robot is equipped with a 4400 mAh battery, providing up to 90 minutes of uninterrupted operation, which allows for thorough cleaning of the pool floor in a single cycle. After cleaning, the device charges in about 3 hours, quickly returning to full readiness and requiring no long breaks between uses. This combination of runtime and charging time makes the Bublue Bubot 300P ideal for above-ground pools with an area of up to approximately 80 m² and a flat bottom. Simple maintenance – cleaning the robot without tools and effortlessly After use, simply rinse the filter and the robot’s housing with a standard garden hose – no need to disassemble the device or use additional accessories. This cleaning method easily removes sand, leaves, and small debris. Included in the set: Pool cleaning robotChargerHook for removing the robot from the waterHandleBrush x2User manual   ManufacturerBublueModelBubot 300PRated power33WOperating time90 minutesCharger input voltage100-240VCharger output voltage12.6 V DCCharger output current1.8 ABattery capacity4400 mAhCharging timeapprox. 3 hoursSupported pool area80 m²Filter density180 μmWeight3.5 kgCleaning depth3 mWater resistance ratingIPX8

Bublue Bubot 500P Pool Cleaning Robot The Bublue Bubot 500P is a cordless robot designed for large above-ground pools (up to 100 m²), combining 140 minutes of continuous operation, Bluehole™ technology, intelligent navigation, 97% floor coverage, and DirtLock™ Technology 2.0, which prevents leaks when removed from the water. The device takes full control of your pool’s cleanliness, offering convenience, efficiency, and time savings—no cables, no effort, no stress. Bluehole™ Suction Technology – power that delivers excellent results The Bublue Bubot 500P’s performance is driven by advanced Bluehole™ suction technology, based on the interaction of the nozzle, motor, and impeller. The result? Cleaning is twice as fast, and debris removal efficiency increases by up to 8.5 times compared to the previous generation. The robot effortlessly handles both fine sand and larger debris without losing power or stability. Maximum results in a single pass The Bublue Bubot 500P robot was designed with the conditions of above-ground pools in mind, where both fine sand particles and larger organic debris accumulate at the bottom. Thanks to advanced suction technology, it effectively removes sediment and sand with significantly higher efficiency than standard designs, while easily handling particles ranging from 3 to 8 mm in size—a challenge many devices cannot overcome. Another key advantage of the Bubot 500P is its ability to collect leaves and larger debris, which are sucked up steadily and without loss of power. Hydrodynamic design and smart sensors The robot’s specially designed hydrodynamic shape allows it to move smoothly and stably along the pool floor, minimizing dead zones. In practice, this means up to 97% actual coverage of the pool floor, which significantly increases cleaning efficiency and eliminates the problem of missed areas. The Smart Wall Sensor enables the robot to react dynamically to contact with the pool walls. The Bublue Bubot 500P automatically changes direction, optimizes its path, and maintains high cleaning performance even along the edges, where the most debris accumulates. DirtLock™ Technology 2.0 – Cleanliness Without Leaks or Waste The DirtLock™ Technology 2.0 used in the Bublue Bubot 500P completely changes the way the device is emptied after a cleaning cycle, eliminating one of the most troublesome issues with traditional pool robots. Once the robot is removed from the water, the system drains the water in just 5 seconds, which significantly reduces the device’s weight and prevents uncontrolled dripping, while effectively blocking debris from flowing back into the pool. Thanks to the basket’s airtight seal, nearly all collected debris remains securely trapped inside, which reduces maintenance time by up to several dozen percent and allows for maximum cleaning efficiency without creating a mess around the pool. Larger basket, fewer interruptions – capacity increased by 30% The Bublue Bubot 500P model offers maximum utilization of the filter basket space, whose capacity has been increased by as much as 30% compared to standard solutions. This means longer operation without emptying and a clear advantage over robots with limited capacity. Plus, keeping the robot in perfect condition is a breeze. Both the filter and the chassis can be rinsed off in just a few moments with a regular garden hose. Long runtime, full control, and wireless convenience The 5200 mAh battery provides up to 140 minutes of continuous operation, allowing you to clean large above-ground pools without interrupting the cycle, and a charging time of just 2.5 hours ensures it quickly returns to full readiness. When the battery level starts to drop, the intelligent Self-Parking technology automatically guides the device to a safe spot near the pool wall, making it easy to remove. A four-color LED indicator provides real-time updates on operating status, charging, battery level, self-tests, and any malfunctions. The package is rounded out by a fully wireless design that eliminates the problem of tangled cables and ensures smooth, safe operation in above-ground pools with an area of up to 100 m² and a depth of up to 3 m. Included: Pool cleaning robotChargerHook for removing the robot from the waterHandleBrush x2User manual   General ManufacturerBublueModelBubot 500POperating time120 minutesCharging time3 hoursRecommended pool sizeMax. 100 m²Filter density180 μmWeight5.5 kgWater depthMax. 3 mWater resistance ratingIPX8   Pool conditions pH7.0–7.8Temperature10°C to 35°CNaClMax. 5,000 ppmChlorineMax. 4 ppm

Bublue Bubot 700 Pool Cleaning Robot The Bublue Bubot 700 is an advanced pool cleaning robot that combines powerful propulsion with intelligent navigation and convenient app control. Three independent motors powered by Bluehole Tech™ deliver high suction power and stable operation, effectively removing debris from the pool floor, walls, and waterline. The cleaning system ensures that a single cycle is sufficient to thoroughly refresh the entire pool, while Bluesonic Path™ technology with AI algorithms intelligently maps the robot’s route, maximizing coverage and eliminating random movements. With an operating time of up to 120 minutes, it can handle pools with an area of up to approximately 80 m². The device is designed to work in all types of pools. After completing the cleaning cycle, the Bublue Bubot 700 automatically docks against the pool wall, making it easy to quickly and conveniently remove it from the water. The whole unit is complemented by a durable construction made of UV-resistant materials. Bluehole Technology™ – a three-motor drive system for effective scrubbing The Bluehole™ technology used in the Bublue Bubot 700, combined with a three-motor drive system, ensures high and stable suction power throughout the entire operating cycle. The system delivers a flow rate of 3,434 GPH, which translates to efficient debris suction and effective removal into the filter basket. The robot’s design also enables twice as intense scrubbing of surfaces, allowing for more thorough removal of deposits and dirt adhering to the bottom and walls of the pool. Additionally, the dual-drive system ensures stable movement of the robot and allows it to easily navigate obstacles and steps in the pool. This solution supports smooth movement across various surfaces, increasing traction and movement control. Bluesonic Path™ – intelligent route planning for maximum coverage Bluesonic Path™ technology uses AI algorithms to intelligently plan cleaning routes to best cover the entire pool surface. The robot moves according to optimized S- and N-shaped patterns, adjusting the width of its passes to current conditions and the size of the working area. Thanks to intelligent path adjustment, the device minimizes missed spots on the pool floor. The availability of three cleaning modes allows you to choose the operating mode based on your needs. The available modes are Auto Mode, Floor Mode, and Wall Mode. Improved filtration – effective capture of fine debris The improved filtration system uses a 180 μm filter and a 4-liter debris basket. This solution enables the effective capture of very fine debris, including particles the size of sand, while allowing for the collection of a larger amount of dirt during a single cleaning cycle. As a result, filtration remains effective even in the presence of a mixture of fine sediment and larger items, such as leaves or small pebbles. App Control – Effortless Cleaning Customization The mobile app allows for convenient control of the robot and the creation of a personalized cleaning schedule directly from your smartphone. With it, you can select a cleaning mode, adjust the duration of the cleaning cycle, and set the cleaning path width, tailoring the robot’s operation to your current needs. The app supports Wi-Fi and Bluetooth (2.4 GHz Wi-Fi) and offers OTA updates, allowing you to take advantage of new features and improvements. Long runtime and autonomous docking The 5200 mAh battery provides up to 120 minutes of runtime on a single charge, allowing you to clean pools with an area of up to approximately 80 m². A full charge takes about 3.4 hours. When the battery is low, the Bublue Bubot 700 automatically parks near the wall, which makes it much easier to remove it from the water. An LED indicator shows the device’s current status: blue indicates operation with a charge level between 40% and 100%, orange between 20% and 40%, yellow indicates a low battery (below 20%), green indicates charging, and red indicates an error. Versatile application, durable construction, and easy maintenance The device is designed to work on various materials, such as concrete, vinyl, fiberglass, and ceramic tiles, and is suitable for pools of various shapes, including rectangular, round, irregular, and multi-zone pools. Each unit is rigorously tested for watertightness and mobility, and the UV-resistant housing is designed to minimize aging and material degradation. The robot’s design is adapted for operation at depths of up to 3 meters, ensuring watertightness and proper component function. Maintenance has also been simplified as much as possible—simply remove the filter basket and thoroughly rinse the mesh with clean water to remove accumulated debris. Included in the set: Pool cleaning robotChargerHook for removing the robot from the waterUser manual   ManufacturerBublueModelBubot 700Charger input voltage100Vac-240Vac, 50Hz/60HzCharger nominal output voltage21 VCharger nominal output current2.6 AMaximum operating time120 minutesBattery capacity5200 mAhCharging time3.4 hoursWaterproof ratingIPX8Maximum coverage area80 m²Maximum cleaning depth3 mFilter density180 μmFlow rate13 m³/hWeight10 kgStorage temperature5°C to 35°C

Bublue Bubot 700P Pool Cleaning Robot The Bublue Bubot 700P is an advanced, cordless cleaning robot designed for users seeking an efficient and fully autonomous solution to keep their pool spotlessly clean. The device combines high suction power of 3,500 GPH, a triple motor system, and proprietary Bluehole™ technology, allowing for the effective removal of leaves, sand, and fine debris from the bottom, walls, and waterline. Thanks to intelligent AI navigation, a long runtime (up to 240 minutes), remote control via an app, and full compatibility with any type of pool, the Bublue Bubot 700P is a modern and reliable tool that operates autonomously, eliminating the need for manual intervention. Bluehole™ Technology and Triple Drive Bluehole™ technology, combined with three independent motors, generates an exceptionally strong and stable water flow, forming the basis of the device’s high performance. A suction power of 3,500 GPH and a dual-brush system enable the effective removal of both larger debris and fine sand, which often remains out of reach of standard cleaning robots. Optimized airflow translates to high cleaning efficiency while maintaining smooth and energy-efficient operation. Smooth navigation and cleaning tailored to current needs Bluesonic Path™ technology, which uses artificial intelligence for route planning, ensures the robot’s smooth movement. The device automatically selects an S- or N-shaped movement pattern and dynamically adjusts the swath width to maximize coverage of the cleaned area. This approach eliminates random movements and minimizes missed spots on the bottom or walls, resulting in a cleaner pool after every cycle. The Bublue Bubot 700P moves freely across the pool floor, climbs the walls, reaches the waterline, and effectively cleans various areas of the pool. Three operating modes—Automatic (Auto), Floor, and Wall—allow you to adapt its operation to the current condition of the pool, and intelligent transitions between surfaces guarantee consistent and thorough results even in more challenging pool designs. Stable drive and easy obstacle navigation The Bublue Bubot 700P’s movement is powered by an independent traction system based on a dual-drive mechanism that utilizes gears and reinforced belts. This system enhances the structure’s durability and ensures excellent traction on various pool surfaces. Stable traction allows the device to smoothly navigate steps, edges, and level changes, as well as safely climb walls. Thanks to this, the robot maintains full control of its movement even in pools with irregular shapes and varied geometries. Full control via the mobile app The Bublue Bubot 700P offers convenient control via a dedicated mobile app that allows you to create personalized cleaning schedules. You can remotely select the operating mode, set the cycle length, and adjust the cleaning path width. The app supports Wi-Fi and Bluetooth connectivity on the 2.4 GHz band and enables OTA updates, ensuring constant access to the latest features. Long runtime and fast charging The 10,400 mAh battery allows the robot to operate for up to 240 minutes, enabling it to thoroughly clean pools with an area of up to approximately 120 m². Charging takes about three hours, allowing the device to quickly return to full readiness. Intelligent power management ensures stable performance throughout the entire operating cycle. When the battery level drops, the Bublue Bubot 700P automatically docks against the pool wall, making it much easier to remove from the water. The quick-drain feature reduces the device’s weight during lifting, enhancing user comfort. A 5-color LED indicator clearly displays the current status. A blue light indicates normal operation with a charge level between 40% and 100%, orange indicates a range between 20% and 40%, and yellow warns of a low energy level below 20%. A green LED indicates the charging process, and a red light indicates a possible error. Versatility and durability for years An advanced filtration system with a precision of 180 micrometers and a capacity of 4 liters effectively captures even very fine debris, such as sand. The filter basket can be easily removed and rinsed under running water, making daily maintenance quick, simple, and tool-free. The Bublue Bubot 700P robot is compatible with all popular pool materials, including concrete, vinyl, fiberglass, and ceramic tiles, and works well in rectangular, round, irregular, and multi-zone pools. The housing, made of UV-resistant materials, protects the device from aging and degradation, and the watertight design allows for safe operation at depths of up to 3 meters. Included in the set: Pool cleaning robotChargerHook for removing the robot from the waterUser manual   ManufacturerBublueModelBubot 700PCharger input voltage100 VAC–240 VAC, 50 Hz/60 HzCharger nominal output voltage21 VCharger nominal output current4 AMaximum operating timeUp to 240 minutesBattery capacity10,400 mAhCharging time3.4 hoursWater resistance ratingIPX8Maximum coverage area120 m²Maximum operating depth3 mFiltration efficiency180 μmFlow rate13 m³/hWeight10.2 kgStorage temperature5 °C to 35 °C

Bublue Bubot 800P Pool Cleaning Robot The Bublue Bubot 800P automates pool cleaning. Four brushes, two suction ports, and a flow rate of 3,566 GPH enable effective debris collection from the bottom and walls, while a 150 W three-axis motor with Bluehole Tech™ ensures stable, efficient operation. The robot climbs walls, increasing its cleaning range. As a corded model, it is not limited by battery life and can operate continuously, while TangleEase™ technology minimizes cord tangling during cleaning. Bluesonic Path™ technology handles route planning and maximizes pool coverage, while the mobile app lets you check the operating status and select a cleaning mode without removing the robot from the water. UV resistance and compatibility with various pool types ensure long, trouble-free operation. Effective debris removal with every pass The Bublue Bubot 800P’s four active brushes vigorously break up deposits and debris on the pool floor and walls, preparing them for effective suction. Two suction ports, combined with a flow rate of 3,566 GPH, enable efficient collection of both fine particles and larger debris, such as leaves or sand. The unit is powered by a 150 W three-axis motor with Bluehole Technology™, which maintains stable suction power and even water flow, increasing cleaning efficiency without the need to repeatedly pass over the same areas. Large debris bin capacity The dual suction system enables bidirectional debris collection—from both the front and rear of the robot—which minimizes performance loss when changing direction. Two independent filter baskets, each with a capacity of 3 liters, provide ample space for collected debris, allowing for longer operation without the need for emptying. Filters with a 180 µm pore size effectively capture fine particles such as sand or sediment while trapping larger debris, resulting in precise cleaning of the entire pool in a single cycle. Full pool coverage The Bublue Bubot 800P’s route planning is handled by Bluesonic Path™ technology, which uses AI algorithms to intelligently guide the device along the pool floor and walls. The robot moves according to pre-planned patterns—in an S- or N-shape—allowing for more effective coverage of the entire surface. The system dynamically adjusts the width of the cleaning path to the conditions in the pool, minimizing path overlap and ensuring no areas are missed. Remote control The Bublue Bubot 800P is operated via a mobile app, which allows you to remotely control its operation in real time. You can manually control the device’s movement in RC mode, precisely directing it to specific locations, which is useful for spot cleaning problematic areas. The app also allows you to schedule cleaning sessions, set the cleaning mode and cycle length, and adjust the cleaning path width. The Return to Waterline feature makes it easy to retrieve the device after it finishes working, and the real-time status preview ensures full control over the cleaning process. Wi-Fi and Bluetooth (2.4 GHz) connectivity, along with OTA updates, allow you to conveniently use the latest features. Quick removal of the robot and simple operation after finishing work After cleaning is complete, the Bublue Bubot 800P robot can be automatically directed to the waterline using the Return to Waterline feature available in the app, making it easy to remove it from the pool without having to search for the device underwater. The operating status is indicated by a three-color LED, which signals normal operation, docking at the wall, or an error. Additionally, the control panel on the power module allows you to manually turn on the robot and select the operating mode and duration. After the cycle is complete, maintenance is limited to removing the filter basket and rinsing it with water, which allows you to quickly prepare the device for the next cleaning. Stable operation without downtime The design of the Bublue Bubot 800P robot is optimized for efficient movement across the pool floor, navigating obstacles, and climbing steps, ensuring continuous cleaning without manual intervention. The TangleEase™ technology reduces power cord twisting, preventing tangles and unplanned robot stoppages during operation. The housing, made of UV-resistant materials, and the watertight design enable safe operation underwater at depths of up to 3 meters, without the risk of component degradation or leaks, ensuring stable device performance. Included: Pool cleaning robotPower supply moduleCarabinerRopeUser manual   ManufacturerBublueModelBubot 800PCharger input voltage100Vac - 240VacNominal output current of the charger5 ANominal output voltage of the charger28 VMaximum operating time240 minutesCable length15 mMaximum coverage area100 m²Filtration densityUp to 180 μmTravel speedUp to 12 m/minWater resistance ratingIPX8Maximum cleaning depth3 mWeight10.3 kgRobot dimensions490 x 465 x 228 mmPower module dimensions220 x 215 x 104 mmStorage temperature-20°C to 60°CCleaning cycle2 h / 3 h / 4 h

Bublue BuHybrid L6 Pool Cleaning Robot The Bublue BuHybrid L6 is an advanced pool cleaning robot that combines wired and wireless modes, offering flexibility tailored to various usage scenarios. The device provides 5-in-1 smart cleaning (floor, walls, waterline, full-pool mode, and spot cleaning), utilizes Bluesonic Path™ technology with AI-based route planning, generates suction power of up to 2906 GPH, and operates at depths of up to 3 meters. Thanks to a mobile app with Wi-Fi and Bluetooth, remote control mode, and advanced 180 µm filtration with silver ions, the BuHybrid L6 is a comprehensive solution for daily and intensive pool cleaning. Hybrid design – wired or wireless The Bublue BuHybrid L6 offers two operating modes that can be freely switched depending on your needs. In wireless mode, the 5200 mAh battery provides up to 120 minutes of runtime and is ideal for daily, quick cleaning—it’s mobile, convenient, and supports fast charging (under 3 hours). Corded mode guarantees unlimited runtime and access to Eco, Performance, and Corner Boost Power modes, making it the ideal solution for thorough, personalized cleaning. Bubattery™ smart energy management reduces power consumption by up to 50% and can extend battery life by an additional year, while the low-power charging feature (<4 hours) allows for efficient and safe energy replenishment. 5 cleaning modes and full pool coverage The BuHybrid L6 operates in Auto, Floor, Wall, Waterline, and Full Pool modes, ensuring comprehensive cleaning of the entire pool. The Cross-Platform feature enables smooth navigation between levels and surfaces. Horizontal Waterline Cleaning guarantees fast and thorough removal of dirt from the critical water-wall contact zone. Thanks to Corner Boost™ technology, the robot touches the wall, reverses briefly, and then moves forward again to clean corners more effectively. Bluesonic Path™ Smart Navigation and Tilt Control Bluesonic Path™ technology, featuring AI-based route planning, ensures precision. The robot uses S- and N-shaped patterns, as well as Smart Path Width Adjustment, to maximize surface coverage and minimize missed areas. Ultrasonic sensors enable precise navigation around stairs, drains, and slopes, while the Sonar-guided Deep Water Pilot™ system ensures stable cleaning of the pool bottom at all depths—from the shallow end to the deep end, up to 3 meters. Advanced filtration and debris removal efficiency Cleaning efficiency is ensured by Bluehole™ technology, which, combined with a new brushless water pump motor, generates suction power of up to 2,906 GPH. The intense water flow effectively removes both larger debris and fine sand particles. The Deep Cleaning Filtration system uses a filter with a precision of up to 180 µm and a 4-liter debris basket, ensuring effective dirt retention. Additionally, silver ion technology reduces the growth of bacteria, unpleasant odors, and biofilm, supporting water hygiene and the cleanliness of the entire pool basin. Full control via the app and remote control mode The Bublue BuHybrid L6 robot connects to the mobile app via Wi-Fi (2.4G) or Bluetooth and supports OTA updates. You can select a cleaning mode, set the cycle length, adjust the cleaning path width, schedule cleaning times (choosing days of the week and frequency), and activate the return-to-waterline mode. The Remote Control Car Mode allows you to manually control the robot like an RC car—it’s the perfect solution for precise cleaning of a specific area. Durability, compatibility, and safety The UV-resistant housing protects the device from aging and material degradation, ensuring long-lasting performance. The BuHybrid L6 is compatible with pools up to 150 m² and works well on various surface types, such as concrete, vinyl, fiberglass, and ceramic tiles. Thanks to its high mobility, the robot easily navigates obstacles and steps, ensuring uninterrupted, effective cleaning regardless of the pool’s design. Included in the set: Pool cleaning robotPower supply module + power cableHook for removing the robot from the waterUser manual   ManufacturerBublueModelBuHybrid L6Input voltage of the power supply module100Vac ~ 240Vac; 50/60HzNominal output current of the power supply moduleMax. 5 ANominal charging current of the power supply module outputMax. 2.5 ANominal output voltage of the power supply module28 VCable length15 mCleaning modeAuto/Wall/Floor/Water levelCleaning cycle (with cable)2 / 3 / 4 hCleaning cycle (without cable)Max. 120 minCharging time3 hoursCoverage area150 m²Filtration densityMax. 180 μmFilter basket capacity4 lTravel speedMax. 11 m/minWater resistance ratingIPX8Cleaning depthMax. 3 mWeight10 kgDimensions410 x 397 x 278 mmStorage temperature5°C to 35°COperating temperature10°C to 35°C

Bublue Vortex V5 Pool Cleaning Robot The Bublue Vortex V5 robot revolutionizes daily pool maintenance by combining smart technologies with exceptional cleaning power. The device provides excellent suction and effectively removes all debris from surfaces up to 50 m², while its operating time of up to 180 minutes on a single charge ensures thorough cleaning without interruptions. Two-stage filtration with a spacious 5-liter basket and a mesh density of up to 35 PPI traps even the finest particles of dirt. Thanks to the Smart Escape feature, the robot navigates around obstacles, eliminating the risk of getting stuck, while the intuitive mobile app allows you to control and monitor cleaning progress in real time. The Bublue Vortex V5 is the perfect solution for any pool owner who wants to enjoy crystal-clear water effortlessly. Bluehole™ Technology – Power That Leaves No Debris Behind Dual motors generating 2061 GPH of suction power ensure that the Bublue Vortex V5 effortlessly handles leaves and all types of debris, leaving no residue in the pool. The advanced BuVortex V5 system with Smart Escape ensures that the robot operates smoothly—you don’t have to worry about jams or downtime. Full control via the app The mobile app lets you customize the cleaning mode to suit your needs. Auto Mode with intelligent route planning ensures comprehensive coverage of the entire pool, while Corner Boost extends cleaning time along the edges, utilizing the pioneering Bluestream™ active suction technology to effectively capture stubborn debris. Automatic overflow protection The Auto Overflow Guard system causes the robot to automatically stop underwater during cleaning, and once it finishes, it surfaces, trapping the collected debris in the filter chamber—ensuring that leaves or dirt don’t escape back into the pool. Hassle-Free Maintenance Keeping the robot in top condition requires only rinsing the overflow prevention mesh, the filter basket, and the filter cartridge with clean water. A multicolored LED indicates the device’s status: blue means it is operating with a charge level between 20 and 100%, yellow indicates a low charge level and an automatic return to the docking station, green indicates charging, and red signals a malfunction. The backlight also makes it easier to locate the robot after dark. Note: While charging, the robot must be dry and kept in a covered area. Performance and Durability for Years to Come The 7800 mAh battery provides up to 180 minutes of continuous operation, making the Bublue Vortex V5 the ideal solution for pools up to 50 m². A full charge takes approximately 4 hours. The UV-resistant housing guarantees long-lasting, trouble-free operation without material degradation. The robot is designed to function reliably even in saltwater. Included: Pool cleaning robotChargerHook for removing the robot from the waterFilter cartridge (cotton) x2Overflow prevention net x8User manual   ManufacturerBublueModelVortex V5Charger input voltage100 VAC–240 VAC; 50/60 HzCharger rated output current3.8 ACharger rated output voltage12.6 VCleaning modeAuto/Corner BoostCleaning cycleMax. 180 minutesCleaning areaMax. 50 m²Cleaning depthMin. 0.5 mCharging time4 hoursFilter densityMax. 35 PPIFilter basket capacity5 lTravel speedMax. 13 m/minWaterproof ratingIPX8Weight5.2 kgDimensions400 x 331 x 331 mmStorage temperature5°C to 35°COperating temperature10°C to 35°C

Wybot Hyson100 handheld pool vacuum cleaner Wybot Hyson100 is a compact handheld vacuum cleaner designed for cleaning small pools, spas and hot tubs. Thanks to its cordless design, its operation is extremely simple and convenient. You can quickly get rid of dirt without having to connect cables or hoses. 60 minutes of operation on a single charge The device is equipped with a powerful rechargeable battery that allows 60 minutes of continuous operation. This is enough time to effectively clean the entire surface of the pool without interruptions for recharging. Telescopic aluminum pole The vacuum cleaner has a telescopic aluminum pole that extends up to 1.5 meters, allowing easy access to hard-to-reach areas. Stairs, corners or pool walls will no longer be a problem. Effective dirt removal The Hyson100 Wybot copes with leaves, pollen, mud, insects and acorns, effectively sucking all dirt out of the water. A special brush on the tip allows for more thorough cleaning of sediment from the bottom and walls of the pool. Easy operation and quick cleaning of the filter Thanks to the built-in filter mesh container, emptying the vacuum cleaner is quick and hassle-free. After cleaning is complete, simply remove the filter, rinse it under running water and the vacuum is ready to be used again. Ideal for different types of pools and spas The Wybot Hyson100 will work well in garden pools as well as hot tubs, spas and whirlpools. Its versatility makes it easy to keep water clean in a variety of environments. Included Pool vacuum cleaner x1USB charging cable x1Telescopic rod x1Handle x1User manual x1Brush head x2Quick start guide x1   ManufacturerWybotModelHyson100Pool typeSpa, hot tubRated operating voltage4.2 VPowerapprox. 15WDuty cyclemax. 60 minBattery capacity5200 mAhCharging time4 - 5 hFilter capacityapproximately 25L/minFilter density250 µmDegree of protection IPIPX8Pool water temperature10°C-35°CCharging environment temperature10°C-35°CStorage temperature5°C-35°CProduct weight1.2 kgProduct size440*132*110 mm

ULTENIC Pooleco 10 Pool Cleaning Robot The ULTENIC Pooleco 10 is a cordless robot designed for automatic cleaning of pool bottoms. The device is equipped with two powerful motors, a 5200 mAh battery, and an operating system that allows for continuous operation for up to 90 minutes. A single charge, which takes less than 3 hours, allows it to clean an area of up to 80 m². The model is designed for above-ground, in-ground, and indoor pools, and its cordless design eliminates the problem of tangled cords. Operation is controlled with a single button, so getting the device ready for use takes just a moment. Dual Suction Power and More Effective Debris Removal The ULTENIC Pooleco 10 robot uses two independent motors to effectively remove debris from the bottom of the pool. Thanks to its dual suction system, the device efficiently collects leaves, insects, sand, dust, and other debris that settles on the surface. This solution helps keep the pool clean with less effort and reduces the need for manual debris removal. Up to 90 minutes of runtime and fast charging The high-capacity 5200 mAh battery allows for uninterrupted operation for up to 90 minutes. This is enough time to thoroughly clean an area of up to 80 m² without having to stop and recharge the device. Recharging takes less than 3 hours, and a simple LED indicator shows the charging status. A red light indicates a low battery or that charging is in progress, while a green light means the battery is fully charged. Cordless design for greater convenience The absence of cords allows the robot to move freely across the pool floor without the risk of tangling or limiting its operating range. Thanks to its compact size, the device is easy to carry, store, and set up for operation. Simply place the robot in the water and press the start button to begin the automatic cleaning cycle. Wide compatibility with various surfaces The ULTENIC Pooleco 10 is designed to work on surfaces made of mosaic, plaster, fiberglass, and vinyl materials. The device works with above-ground, in-ground, and indoor pools, and its design allows for effective operation on surfaces with a slope of up to 10 degrees. The maximum recommended pool depth is 3 meters. It’s important to note that this model is designed exclusively for cleaning the pool bottom and is not intended for cleaning walls, steps, or the waterline. Simple operation and a practical accessory kit The robot’s designers focused on intuitive operation and minimizing the number of steps required to start the device. The use of a float with a cord makes it easy to remove the robot from the water, and additional brushes and spare wheels help extend the equipment’s service life. The compact housing, measuring 32.39 × 32.08 × 16.58 cm, makes it easy to store the device even outside of the summer season. Included in the set ULTENIC Pooleco 10 robotChargerFloat with cordUser manualTwo brushesTwo spare wheels   ManufacturerULTENICModelPooleco 10Device typecordless pool bottom cleaning robotBattery5200 mAhOperating timeup to 90 minutesCharging time≤ 3 hoursMaximum cleaning areaup to 80 m²Number of motors2Maximum surface slope10°Maximum pool depth3 mSupported surfacestile, stucco, fiberglass, vinylDimensions32.39 × 32.08 × 16.58 cmCharge status indicatorLEDIntended usecleaning the pool bottomUnsupported functionscleaning walls, steps, and the waterline

ULTENIC Pooleco 10s Pool Cleaning Robot The ULTENIC Pooleco 10s is a cordless pool cleaning robot designed to clean the pool floor, combining a compact design with an efficient operating system based on two motors and a 5200 mAh battery. The device can operate continuously for up to 90 minutes and effectively remove debris from areas up to 80 m². This model is suitable for both above-ground and in-ground pools, and its compact dimensions—32.39 × 32.08 × 16.58 cm—make it easy to transport and store. Effective Removal of Dirt from Various Surfaces The ULTENIC Pooleco 10s robot is designed to clean the bottoms of pools made of mosaic tiles, plaster, fiberglass, and vinyl liners. The brushes and efficient drive system effectively remove sand, leaves, and other debris that accumulates on the bottom. Its ability to operate on surfaces with a slope of up to 10° makes it ideal for irregularly shaped pools as well. One-button start and cordless design Operating the robot has been simplified as much as possible, so starting it requires pressing just one button. The lack of cords enhances user comfort and eliminates the problem of tangled cables, which often hinder pool cleaning. The cordless design also makes storing the device more convenient and allows for greater freedom during use. Up to 90 Minutes of Efficient Operation A 5200 mAh battery ensures stable operation, providing up to 90 minutes of runtime on a single charge. This runtime allows you to effectively clean an area of up to 80 m², reducing the need for frequent recharging. This solution makes regular pool maintenance simpler and less time-consuming. Automatic Parking Feature The ULTENIC Pooleco 10s model is equipped with a Self-Parking feature that enhances the convenience of everyday use. After completing a cleaning cycle or when the battery level is low, the robot stops near the edge of the pool, making it easy to remove it from the water. The float with a cord included in the set allows you to quickly retrieve the device without having to enter the pool. Compatibility and Usage Restrictions The robot is designed to clean the bottoms of above-ground pools, in-ground pools, and covered pools. The device is intended exclusively for use on the pool floor and is not designed to clean walls, steps, or the waterline. The maximum pool depth should not exceed 3 meters, and the slope of the pool floor should be no more than 10°. Convenient operation via the app and remote control The robot works with a dedicated mobile app, allowing the user to conveniently manage its operation. Additional convenience is provided by the remote control, which enables quick changes to settings. This solution allows you to better tailor the device’s operation to the size of the pool and the level of dirt. Included in the set ULTENIC Pooleco 10s pool robotChargerRemote controlUser manualFloat with cordBrushes x 2Spare wheels x 2   ManufacturerULTENICModelPooleco 10sDevice typecordless pool bottom cleaning robotBattery capacity5200 mAhMaximum operating timeup to 90 minutesCharging time≤ 3 hoursMaximum cleaning areaup to 80 m²Maximum pool depth3 mMaximum pool bottom slope10°Number of motors2Supported surfacestile, plaster, vinyl liners, fiberglassDimensions32.39 × 32.08 × 16.58 cmAutomatic parking functionyes (Self-Parking)

Wybot M1C wired swimming pool cleaning robot Wybot M1C is a state-of-the-art wired pool cleaning robot that combines high performance with ease of use. Thanks to the Plug & Play function, you just need to plug in the device to start cleaning immediately. You don't have to worry about complicated setup - the M1C is ready to work in seconds. Powerful brushless motor At the heart of the robot is a 150W brushless motor, which provides longer life, quieter operation and higher efficiency compared to traditional brush motors. With this, the M1C thoroughly removes debris such as leaves, sand and sediment without leaving a mess. Full pool coverage The M1C cobot is designed to effectively clean the bottom, walls, steps and waterline. With its wall-climbing function and one-button return to the waterline, the robot easily moves around the entire pool without skipping any surface. Precise route planning The robot uses a 6-axis gyroscope and infrared sensor technology to accurately map the pool and determine the most efficient cleaning route. This saves time and energy while ensuring thorough dirt removal. The device works in round, polygonal and kidney-shaped pools. Multiple cleaning modes to suit your needs Using the dedicated mobile app, you can choose from multiple cleaning modes, matching the robot's performance to your current needs. The full cleaning mode provides comprehensive removal of debris from the entire pool, while the "Water Line Only" mode focuses on removing deposits that accumulate along the water surface. For more precise cleaning, there are also options to clean only the bottom or only the walls of the pool, allowing for flexible management of the robot's operation. Advanced navigation The Wybot M1C moves along optimized routes that guarantee maximum coverage of the pool surface. Thanks to advanced navigation algorithms, the robot can operate in one of several patterns: Star Path, which with a star pattern ensures thorough cleaning, or S Shape Path, ideal for even surface coverage. For more intensive cleaning, the robot uses the Cross Path route, while the Regular Path works well for everyday cleaning. Advanced H Shape Path and N Shape Path patterns are also available, ensuring precise cleaning of even hard-to-reach areas. Smart scheduling of work cycles With the scheduling function, you can plan your cleaning for the entire week by selecting a start time for each day. There are three cleaning cycles available to you: 1, 2 or 3 hours, depending on the size and dirtiness of your pool. Full control via the app Using the mobile app, you can manually control the robot to direct it to a specific spot that needs more thorough cleaning. Additional features, such as mode selection, water temperature monitoring, weekly scheduling and one-button return to water line, provide convenience and full control. Safety of use The Wybot M1C is equipped with a multi-level protection system that ensures safe use in all conditions. The device has protection against battery over-discharge, overcharging and overvoltage, which protects both the robot and the pool's electrical system. In addition, the system protects against current overload and short circuit, ensuring safe operation even during prolonged operation. Continuous operation without interruption With 150W of power, precise pool mapping and powerful protection systems, Wybot M1C works without interruption, effectively removing dirt from the entire pool surface. No longer do you have to worry about poor cleaning results, low power or short life - the M1C is designed to meet any challenge. Included RobotPower boxUser manualAbbreviated manualCable (18 m)Safety rope   ManufacturerWybotModelM1CRated input voltage100~240VAC, 50Hz/60HzRated output voltageDC 28VRated power100WOperating modesFloor mode / wall mode / standard full pool mode / waterline modeCable length18mFiltration volumeApproximately 15 m3/hFilter densityMulti-level filtrationMax cleaning areaUp to 130 square metersWater resistance levelPurifier IPX8, power box IPX5Pool water temperature10-35°CMovement speed11m/min~16m/minProduct size460 * 440 * 245mmWeightMain body of the machine 9.5kg ± 0.1kgStorage conditions5°C-35°C, RH ≤75%

Wybot C1 Max wireless pool cleaning robot Wybot C1 Max is an advanced pool cleaning robot that effectively removes dirt from the bottom, walls and waterline. Thanks to modern technology, it leaves no spot left out, ensuring perfect cleanliness in every nook and cranny. Powerful performance and fast charging Equipped with a unique 25.9V battery system, the robot offers up to 150 minutes of operation on a single charge. In addition, with a 5A charging input, it takes only 2.5 hours to fully charge, allowing the device to quickly prepare for the next cleaning cycle. Powerful suction power and effective filtration The Wybot C1 Max is powered by three powerful 65W motors that provide high suction power and effectively remove fine dirt such as hair, twigs, gravel, leaves, debris and dust. The 180µm fine filter effectively captures dust, leaves and other debris to prevent re-deposition. Effortless wall climbing Thanks to its innovative traction system, the robot effortlessly climbs the walls of the pool, ensuring thorough cleaning over the entire surface. Forget about problems with falling or getting stuck - the C1 Max moves confidently over any surface. Intelligent algorithms and infrared sensors With a state-of-the-art infrared sensor and improved algorithms, the robot efficiently plans its cleaning route, avoids obstacles and optimizes its movement, minimizing the time it takes to fully clean the pool. The robot handles round, rectangular and irregular shaped pools. Full control at your fingertips With the WYBOT app, you can customize the robot's settings to suit your preferences. You can choose the shape of the pool, set the cleaning route and select one of the available modes. What's more, the C1 Max offers a manual control function, allowing you to precisely direct the device to the desired locations. Personalized cleaning modes The robot offers several modes to suit different user needs. Bottom mode - thorough cleaning of the surface of the pool, wall mode - removal of dirt from the sides, full pool mode - comprehensive cleaning of the entire basin, cycle mode - the ability to set 4 different work cycles for regular cleaning. Easy cleaning and maintenance Thanks to the top filter removal system, emptying the robot is extremely fast and convenient. Just remove the container, rinse it with water and the device is ready for the next use. Included Robot x1Filter basket x 1Instruction manual x1Quick reference guide x1Charger x1Hook x1Floating parts   ManufacturerWybotModelC1 MaxPool dimensionsMax 200m2Depth4mDimensions of the device372*360*240 mmWeight7.8kgWorking time180 ~ 210 minCharging time3,5 hPower65WCharger input100-240V, 50-60HzCharger output25.2V / 2.6ABattery capacity7800mAhFilter180μmFlow rate11.5 m3/HMoving time11m/minWater resistanceIPX8Connection to the appAvailableOTA updateAvailable

Wybot C2PRO wireless pool cleaning robot Wybot C2PRO is a wireless pool robot that combines compact design with high cleaning efficiency. It is equipped with a 4600 mAh battery, which provides up to approximately 3-3.5 hours of operation on a single charge, and a two-layer filtration system with a 180 µm basket. The device supports several cleaning modes and can be operated from a mobile app via Bluetooth, allowing you to conveniently adjust its operation to your current needs. The C2PRO is suitable for pools of various shapes and sizes up to 150 m². Several cleaning modes to choose from The Wybot C2PRO offers several operating modes that allow you to select the intensity and scope of cleaning for a specific application. The available options are Eco Mode, Floor, Standard Full Pool, Wall, and Wall Then Floor. This allows the robot to work selectively or comprehensively, effectively cleaning both the bottom and walls. Intelligent cleaning routes The robot moves around the pool according to pre-programmed patterns, such as H Pattern, N Pattern, and V Pattern. The use of different routes allows for even coverage of the cleaned surface and reduces the likelihood of missing sections of the bottom or walls. Full control from the app The robot is controlled using a button or a mobile app, which allows you to select modes, create schedules, and set work routes, among other things. From your smartphone, you can, for example, start cleaning the bottom, walls, or the entire pool, as well as schedule periodic cleaning. Two-layer filtration with a 180 µm basket The two-layer filtration system effectively captures both larger debris and fine particles. A 180 µm filter basket and an ultra-fine filter are responsible for trapping fine sediments, sand, and dirt floating in the water. This design maintains high cleaning efficiency with regular use of the robot. Long operating time and fast charging The 4600 mAh battery provides approximately 3-3.5 hours of continuous operation. After completing a cycle, the device can be fully charged in about 2-2.5 hours, allowing for quick preparation for the next cleaning. The wireless design eliminates the problem of tangled cables and increases freedom of use. Works in a variety of pools The Wybot C2PRO is designed to work in pools up to 150 m² in size and of various shapes, such as rectangular, round, kidney-shaped, or custom. It can also be used on surfaces made of vinyl, concrete, fiberglass, and other popular pool materials. All this makes it ideal for most situations. Included RobotChargerFloating elementsHook for removing the robot from the waterUser manualQuick start guide   ManufacturerWybotModelC2PROTypeCordless pool cleaning robotCleaning rangeWalls and bottomBattery capacity4600 mAh | 21.6 VBattery typeLithium-ionOperating timeUp to approx. 3-3.5 hoursCharging timeApprox. 2-2.5 hoursPower65 WNumber of motors3FiltrationStandard 180 µm filter basket + HEPAFlow rate11.5 m³/hSpeed10 m/minSensor typeUltrasonicConnectivityBluetoothControlMobile app / buttonCleaning modesFloor / Wall / Standard Full-Pool / Wall then Floor / Eco ModeTimeCyclic timer, 1x120 / 2x60 / 3x40 / 4x30 minTimer settingsAvailable in the appOTA updatesYesCharge level displayYesWeight8 kgDimensions360 x 360 x 240 mmMax. pool area150 m2

Wybot C2 Pro Vision wireless pool cleaning robot Wybot C2 Pro Vision is a wireless robot designed to clean pools thoroughly and conveniently. Thanks to its powerful triple motor and intuitive controls, the device can effectively deal with dirt both on the bottom and on the walls of the pool. It will work well in pools up to 180 m² and up to 3 meters deep, providing thorough cleaning without manual scrubbing. Different modes - cleaning to suit your needs The robot offers several cleaning modes that can be activated directly on the device or from the mobile app. You can choose fromamong others. eco, cleaning modes for the floor, walls or the entire pool, and a vision mode that focuses on cleaning the bottom. This flexibility allows the robot to operate exactly where it is needed most. Performance and technology that make a difference With a capacity of up to 11.5 m³/h and 65 watts of power, the Wybot C2 Pro Vision removes dirt quickly and effectively. It is equipped with a standard 180 μm basket and a 50 μm HEPA filter to trap dirt. The triple motor ensures stable movement at a speed of 10 m/min, while built-in ultrasonic sensors and a camera help with underwater orientation. Convenience of use and safe design With the mobile app, you can schedule the robot in advance by setting the timer in one of four available modes. In addition, the battery level indicator lets you know when to renew its energy - after about 3 h it will be ready to continue working. Included robotchargerfloating partshook for pulling outinstruction manualabbreviated instruction manual   ManufacturerWybotModelC2 Pro VisionVoltage21.6 VDimensions of the poolmax. 180 m²Cleaning modesfloor, wall, full pool cleaning, first walls then floor, eco, vision (floor only)Operation timemax. 3 h (eco mode)Performance11.5 m³/hBattery capacity4600 mAh / 99.36 WhPower65 WCharging time3 hMax. depth of the pool3 mWater resistanceIPX8Weight11 kgFilterRegular filter basket 180 μm + HEPA (50 μm)

Wybot F1 wireless pool cleaning robot Wybot F1 is a smart robot designed to clean the surface of above-ground and in-ground pools. It is highly efficient and easily removes leaves, animal hair, flower petals, and insects. In Standard mode, the device operates for about 8 hours, and in Smart mode – even for 24 hours a day. What's more, its durable construction and IPX8 waterproof rating make the robot perfectly suited for continuous operation in water. Eco-friendly solar power and high performance The robot is equipped with a 33 W solar panel, which allows it to charge in about 5-6 hours using solar energy. This solution reduces the need for manual charging and promotes energy-efficient, sustainable operation. Intelligent operating modes tailored to your needs There are two operating modes available for the robot. Smart mode allows for 24/7 operation, combining active cleaning with automatic breaks. This solution keeps the water surface clean around the clock. Standard mode, on the other hand, offers up to 8 hours of continuous operation and is ideal for intensive, one-time cleaning. To select a mode, simply use the app. Efficient cleaning The robot is designed to eliminate the problem of hair and other debris getting tangled in its components. This makes cleaning smooth and hassle-free. In addition, the anti-backflow system ensures that collected leaves, hair, and insects remain in the filter basket without the risk of being released back into the water. EdgeMaster technology and intelligent obstacle avoidance EdgeMaster technology automatically directs the robot towards the pool walls, where floating debris often accumulates. This allows the device to clean the water even more effectively! In addition, the intelligent obstacle avoidance system allows for trouble-free cleaning around ladders and other pool elements, minimizing the risk of getting stuck and ensuring continuous operation. Large waste tank and precise filtration The Wybot F1 is equipped with a large 7-liter waste tank. You don't have to empty it too often! In addition, the 180 μm filter effectively captures fine debris such as hair and dust, improving water clarity and transparency. Full control via the WYBOT app The dedicated WYBOT app allows you to remotely control the robot, manually guide it to specific locations, and select operating modes. You can also check the battery level in real time and take advantage of OTA updates that improve system performance. Simple operation and durable construction The device has been designed for maximum ease of use. It can be started with a single button, and the app allows you to easily manage its operation. The robot also has a built-in LED indicator that informs you about its operating status and low battery level, among other things. In addition, its UV, high temperature, rain, and chlorine resistant design makes the Wybot F1 suitable for long-term use in a pool environment. Included Pool cleaning robot x1Hook x1User manual x1Quick start guide x1   ManufacturerWYBOTNameWYBOT F1ModelF1ColorBlack, greenTypeSkimmerCleaning rangeWater surfaceOperating timeStandard mode: approx. 8 hoursSmart mode: 24/7Recommended pool sizeNo restrictionsPool typeAbove-ground and in-groundPool shapeAll shapesWaterproof ratingIPX8Solar powerYesDual charging modeOptionalFilter7 L 180 μm filter basketAnti-stuck protectionYesIntelligent obstacle avoidanceYesApp/remote controlBluetooth/mobile appHigh temperature and UV resistanceYesBattery typeLithium batteryBattery capacity5200 mAhCharging timeApprox. 6 hours (solar charging)Output voltage11.1 VSolar charging power33 WRobot weightApprox. 6.5 kgApp nameWYBOTRequired operating systemiOS 15.0 or later, Android 8.0 or later

Wybot M1 wireless pool cleaning robot Wybot M1 is a cordless robot that will take care of pool cleaning for you. The device offers up to about 5 hours of operation on a single charge, a 120-watt motor and a flow rate of 15 m³/h (3963 GPH) to effectively remove dirt from the bottom, walls and waterline. It also supports 6 cleaning paths and 7 modes, so you can customize its operation according to your current needs. The robot will work well in pools up to 400 sq. ft. Intelligent route planning and high cleaning precision An advanced navigation system based on a six-axis gyroscope and infrared sensor allows the robot to plan cleaning routes in an orderly and collision-free manner. The Wybot M1 moves along 6 different paths, allowing it to thoroughly cover the entire surface of the pool without accidentally skipping parts. The device chooses the route automatically, and if necessary, you can do it yourself using the Expert mode. Powerful suction and dual filtration system The robot is equipped with a powerful 120W brushless motor, which generates the strong suction needed to effectively pick up both fine and larger debris. In addition, the two-level filtration system effectively traps leaves, sand and other waterborne dirt. All this makes keeping your pool clean really easy! Cleaning the bottom, walls and water line The M1 Wybot is not limited to the bottom of the pool. Its design allows it to climb the walls and effectively clean the water line, where dirt most often accumulates. The device can also handle ramps, steps and drains up to about 3 cm high, allowing it to work without unnecessary interruptions. You don't have to worry about the robot getting stuck somewhere and having to rearrange it manually! Operating modes and schedules in the app The robot works with an app that allows you, among other things, to choose from 7 modes of operation. The available options are cleaning the entire pool, cleaning only the bottom, the walls or the water line, cleaning first the walls and then the bottom, Eco Floor and Turbo Floor. So you can easily adjust the operation of the device to suit your current needs! There is also a Cycle Timer function, which allows you to schedule cyclic cleaning. This solution allows you to keep your pool clean without having to manually start the robot every time. It will work well in many different pools The M1 will work well in pools of different shapes and can easily work on many surfaces, such as vinyl, fiberglass, concrete, ceramic tile and stone. It works at depths of up to 3 meters, and thanks to its powerful 10,000 mAh battery, it provides up to about 5 hours of run time. In turn, its charging will only take about 3.5 hours. Convenient use and easy maintenance When the charge level is already low, the robot automatically pulls up to the edge of the pool, making it easy to take it out of the water and plug it in for charging. What's more, thanks to its clever design, access to the filters is quick and convenient, so you can rinse them in no time and get them ready for further use. Forget about complicated, time-consuming maintenance! Included Cleaning robot x1Filter x2Adhesive blocks x6User manual x1Quick start guide x1Charger x1Hook x1   ManufacturerWYBOTModelWYBOT M1Max. recommended pool area400 m²Max. depth3 mDimensions460 × 420 × 230 mmWeight11 kgOperating timeUp to about 5 hCharging timeApprox. 3.5 hBattery voltage25,5 VPower120 WBattery capacity10000 mAhCharger input voltage100-240 V, 47-63 HzCharger output29.4 V / 4 AType of filtrationTwo-levelFlow capacityUp to 15 m³/h (3963 GPH)Movement speedUp to 10 m/minProtection classIPX8OTA updatesAvailableApp connectionAvailable

Wybot M2 wireless pool cleaning robot Wybot M2 is a wireless pool robot that will clean the bottom, walls, and waterline for you. It works well in pools up to 3 m deep and 400 m² in size, and thanks to its 10,000 mAh battery, it provides up to 5 hours of operation (in Eco Floor mode). It also has a built-in wide-angle camera that automatically detects dirt. It also features IPX8 waterproofing, advanced two-level filtration, and app control. See for yourself that keeping your pool clean doesn't have to be time-consuming and tedious – just let the robot do it! Intelligent route planning without dead zones The Wybot M2 uses a gyroscope, infrared sensors, depth sensors, and a vision system to plan optimal cleaning routes. The robot moves according to various patterns, such as Star, Cross, N, H, S, or Z, allowing for thorough coverage of the pool surface without missing corners and hard-to-reach areas. There is also a Dirt Hunting feature, which uses a front camera to detect dirt while cleaning the bottom and concentrates the robot's work where the dirt is actually located, increasing cleaning efficiency. Automatic dirt identification The wide-angle camera and AI vision technology enable active dirt detection and precise removal. The system recognizes various types of debris, including sand, leaves, twigs, stones, hair, and dust, and when operating in Dirt Hunting mode, it provides up to 20 times higher cleaning efficiency compared to standard solutions. 8 cleaning modes The robot works with an app that offers 8 operating modes. With it, you can, for example, set it to clean the entire pool or just the bottom, walls, or waterline. There is also a combined option (walls first, then bottom), as well as Eco Floor, Turbo Floor, and Dirt Hunting functions. With just a few clicks, you can customize the robot's operation to your current needs! Powerful suction and two-level filtration The robot is equipped with three motors that provide high suction power and stable operation on various surfaces. This allows it to eliminate all kinds of debris in the blink of an eye! In addition, the two-level filtration system combines a 180 μm filter basket with a 40 ppi sponge. This configuration effectively captures both larger debris and fine particles – perfect for leaves, sand, and more. In addition, the filter opens from the top for easy cleaning and has a rubber partition that prevents secondary release of dirt. CYCLE TIMER mode and work schedules The CYCLE TIMER function allows you to adjust the operating time and cleaning frequency to your current needs. The robot can operate in regular mode for daily maintenance or in intensive mode when the pool has not been cleaned for a long time. This solution allows for effective energy management. Effective cleaning of the waterline and difficult areas The Wybot M2 has a dedicated waterline cleaning mode that prevents debris from accumulating on the surface. What's more, the robot's design allows it to overcome drains up to approximately 3 cm high and smoothly climb steps, enabling it to work in pools of varying depths and irregular shapes. Suitable for different pools and long operation The M2 model is suitable for pools of various shapes and surfaces, including fiberglass, vinyl, ceramic tiles, concrete, and natural stone. It also features a powerful 10,000 mAh battery that provides up to approximately 5 hours of operation in Eco Floor mode. This allows for effective cleaning of even large and demanding pools. Included Wybot M2 pool robot x1Filter x2Charger x1Hook x1Adhesive block x7Quick start guide x1User manual x1   ManufacturerWYBOTModelWYBOT M2 (WY320)Max. recommended pool area400 m²Max. depth3 mDimensions460 × 420 × 230 mmWeight11 kgOperating timeUp to 5 hours (Eco Floor mode)Charging timeApprox. 3.5 hoursBattery voltage25.5 VCharger input voltage100-240 V, 47-63 HzCharger output29.4 V / 4 APower120 WBattery capacity10,000 mAhFlow rateUp to 15 m³/h (3963 GPH)Movement speedUp to 10 m/minFilter180 μm filter basket + 40 ppi spongeWaterproof ratingIPX8OTA updatesYesApp controlYes

Wybot S2 Solar wireless pool cleaning robot Wybot S2 Solar is a cordless pool robot designed for cleaning the bottom, walls and water lines of in-ground and inground pools up to 300 m². It offers a run time of up to 150 minutes, a powerful brushless motor, dual charging system and several modes to choose from. You can also control it via the app and create weekly schedules. Let yourself be cranked out and entrust your daily pool cleaning to technology! Dual charging: solar and DC The robot supports two charging modes for flexibility and continuous operation. A station with a photovoltaic panel allows it to restore 100% energy in about 2 days of exposure to the sun. This is a convenient and environmentally friendly option that is great for summer. DC charging, on the other hand, allows the robot to be fully charged in about 3 hours. The S2 Solar model's operating time reaches about 2.5 hours. What's more, when the energy level drops below 20%, the device automatically returns to the docking station. You don't have to remember to charge it! Smart schedules and unattended operation With the WYBOT app, you can create weekly cleaning schedules by setting specific times and modes. The robot automatically starts cleaning according to the schedule, ensuring that your pool is consistently clean. Forget about having to manually start the device every day! Efficient brushless motor and powerful suction The brushless motor used ensures high cleaning efficiency. With an average suction force of 3962 GPH, you can quickly remove debris such as sand, leaves, small stones, hair, dust or algae. In addition, the moving speed of up to 10 m/min allows for even and thorough dirt removal from the entire pool surface. Various cleaning modes and full surface coverage Wybot S2 Solar offers several cleaning modes, covering the bottom, walls, water line and combined options. The robot can work on selected areas as well as clean the entire pool, providing thorough coverage of even hard-to-reach areas. Intelligent optimization of motion paths reduces repetition and increases efficiency. Have confidence that every nook and cranny will be sparkling clean! 3D Adsorption system and dual filtration The 3D Adsorption system used combines a 180 μm precision filter basket with an ultra-fine 40 ppi sponge. Dual-level filtration effectively captures impurities of various sizes, from fine dust and sand to leaves, hair or stones. This keeps the water perfectly clean and clear. Control with the app Convenient operation of the robot is enabled by the WYBOT app available for Android and iOS smartphones. With its help, for example, you can remotely control the device, start and stop operation, select cleaning modes and plan schedules. All the most important functions are at your fingertips - just a few clicks away! Adapted for outdoor pools Wybot S2 Solar is designed for outdoor pools of many shapes, such as rectangular, round or irregular. It also works great on a variety of surfaces - including concrete, vinyl, mosaics, fiberglass or natural stone. In addition, the IPX8 waterproof rating and the ability to operate at depths of up to 3 meters ensure safe use in pool environments. Included WYBOT S2 Solar pool robot x1Floating rod x1Hook x1Floating elements x2Filter basket x1Filter sponge x1Charger x1User manual x1   ManufacturerWYBOTNameWYBOT S2 SolarModelS2 SolarColorBlackTypeWireless pool robotOperating temperatureFrom 5°C to 35°CCleaning rangeBottom, walls and water lineOperating timeUp to about 150 minutesMax. recommended pool area300 m²Pool typeAbove-ground and buriedPool surfacesCement, vinyl flooring, mosaic and othersShape of the poolAll shapesWaterproofing classIPX8Max water depth3 mWater line cleaningYesBrush typeHigh speed front brushFilterFilter basket 180 μm + sponge 40 ppiMotorBrushlessAverage suction power3962 GPHControlBluetooth / mobile appExtended cleaning cyclesNoWork scheduleWeeklyMovement speedUp to 10 m/minCleaning modes7 modesAutomatic parkingYesBattery typeLithium batteryBattery capacity5200 mAhInput voltage100-240 V (AC) 47-63 HzDC charging timeApprox. 3 hOutput voltage29.4 V / 3 ACharging power90 WBattery operating temperatureFrom 10°C to 35°CCharging temperatureFrom 5°C to 35°CWeight of the robot8.5 kgApplication nameWYBOTRequired operating systemiOS 15.0 or later, Android 8.0 or later

Wybot S2 Solar Vision wireless pool cleaning robot Wybot S2 Solar Vision is a wireless pool robot that will effortlessly take care of the cleanliness of the bottom, walls and water lines of large outdoor pools up to 300 m². The device is distinguished by its solar power supply, advanced AI VISION mode and powerful brushless motor. As a result, it quickly and accurately eliminates all kinds of debris! Additional advantages of the robot are its working time of up to 150 minutes, IP68 rating and scheduling option. All this means that S2 Solar Vision can work regularly and independently, ensuring the constant cleanliness of the pool. AI VISION and intelligent dirt detection Designed for bottom cleaning, the AI VISION mode uses a camera and artificial intelligence algorithms to detect dirt and analyze the pool environment. This makes the robot up to 20 times more efficient, focusing on areas where dirt is actually present. The system learns during each work cycle and easily recognizes sand, leaves, hair, rocks or algae, among others. In addition, regular OTA updates further improve efficiency and precision. Cleaning schedules and full automation The S2 Solar Vision allows you to create weekly cleaning schedules using AI VISION mode. This allows the robot to automatically start working at programmed times, without the need for manual operation. This feature keeps the pool in perfect condition even under heavy use. Two charging modes and automatic return to station The robot supports two ways of charging: from an outlet (DC) or using solar energy. It can also automatically return to the charging station when the charge level drops below 20%. No need to remember to plug it in! What's more, the powerful 5200 mAh battery provides up to about 2.5 hours of running time. Powerful motor and powerful suction The robot is equipped with a powerful brushless motor that generates an average suction force of 3962 GPH. This effectively removes both fine debris and larger items lingering on the bottom, walls and in the waterline area. The result? A perfectly clean pool and even more swimming pleasure! Multiple cleaning modes and full pool coverage The device offers a total of 11 modes of operation: 4 VISION modes and 7 standard cleaning modes, covering the bottom, walls, waterline and combined options. Intelligent motion paths allow you to easily reach corners, bevels or steps, ensuring full cleaning without skipping difficult areas. 3D Adsorption system and dual filtration The 3D Adsorption system used combines a 180 μm precision filter basket with an ultra-fine 40 ppi sponge. This design makes it possible to effectively capture sand, leaves, twigs, hair, dust, pebbles or algae. Dual filtration allows for high water clarity. App control and spot cleaning mode The robot is operated by the WYBOT app, which allows, among other things, remote control and selection of operating modes. There is also a spot cleaning function, which allows the device to remove dirt in a radius of about 2 meters around itself, which works well for dirt accumulated in one place. Adapted to different types of pools The Wybot S2 Solar Vision is designed for outdoor pools of different shapes, such as rectangular, round, kidney-shaped or irregular. In addition, the device works well on surfaces made of concrete, vinyl liner, mosaic, tile and natural stone. Water resistance to a depth of up to 3 meters and a wide operating temperature range allow safe use in typical pool conditions. Included WYBOT S2 Solar Vision pool robot x1Power supply x1Filter x1Floating elements x1Hook for pulling out the robot x1User manual x1   ManufacturerWYBOTNameWYBOT S2 Solar VisionModelS2 Solar VisionColorBlackTypeWireless pool robotOperating temperatureFrom 5°C to 35°CCleaning rangeBottom, walls and water lineOperating timeUp to 150 minutesMax. recommended pool areaUp to 300 m²Pool typeOutdoor built-in poolPool surfacesCement, vinyl lining, mosaic and othersPool shapeAll shapesWaterproofing classIP68Max water depth3 mAI VISION systemYesBrush typeHigh speed front brushFilterFilter basket 180 μm + sponge 40 ppiMotorBrushlessAverage suction power3962 GPHControlBluetooth / mobile appTurbo modeYesWater line cleaningYesWork scheduleWeeklySpeed of movement0.17 m/sCleaning modes4 VISION modes + 7 standard modesAutomatic parkingYesBattery typeLithium batteryBattery capacity5200 mAhInput voltage100-240 V (AC) 47-63 HzCharging temperatureFrom 5°C to 35°CBattery operating temperatureFrom 10°C to 35°C (tested in laboratory environment, data is for reference only)DC charging timeApproximately 3 hOutput voltage29.4 V / 2.2 APower90 WWeight of the robot8,5 kgApplication nameWYBOTRequired operating systemiOS 15.0 or later, Android 8.0 or later

Wybot Winny 200 wireless pool cleaning robot Wybot Winny 200 is a wireless robot designed for automatic cleaning of above-ground pools with an area of up to 60 m². It stands out with its operating time of up to approximately 80 minutes and filtration capacity of 7.5 m³/h. Powered by a 3200 mAh battery, it eliminates the need for cables, which increases convenience and safety of use. Its compact design and weight of 3.3 kg make the robot easy to carry, and its IPX8 waterproof rating allows for trouble-free operation when submerged up to 2.5 m. Effective cleaning and enhanced suction power The robot is equipped with an improved suction system with a power of up to 30 W, which enables effective collection of sand, leaves, and small debris. The design prevents debris from backing up, so once sucked up, the dirt remains in the device without the risk of being released back into the water. What's more, with a speed of approximately 16 m/min, the Winny 200 effectively covers the entire area to be cleaned. Two-stage filtration system The Winny 200 uses a two-stage filtration system consisting of a foam filter and a 180 µm density tray. This combination effectively captures both larger debris and fine particles. The filter is also easy to remove and clean – you can simply rinse it with water. Intelligent parking at the edge of the pool The smart sensor technology means that when the battery is low, the robot automatically heads towards the pool wall and stops near it. This, combined with the hook included in the set, makes it easy to remove the device from the water. Wireless convenience and simple operation Operating the robot has been simplified as much as possible – just press the button and immerse the device in water to automatically start cleaning. In addition, the wireless design eliminates the need for cables and any range limitations. Relax and watch Winny 200 do the cleaning! Lightweight design, long operating time, and fast charging The low weight and integrated handle make it easy to carry the robot, and the operating time of up to approximately 80 minutes is sufficient to thoroughly clean even a large pool – up to 60 m². The robot charges in about 4 hours, and the built-in LED indicator shows the charging status. Included in the set Cleaning robotFilter basket (foam + 180 µm filter)Handle and gripScraper x2Hook for removing the robot from the waterScrewsChargerUser manual   ManufacturerWybotModelWinny 200 (HJ102P)Operating voltage11.1 VPower30 WOperating timeApprox. 80 minCharger input voltage100–240 VCharger frequency50/60 HzAdapter output voltage12.6 VCharger output current1 ABattery capacity3200 mAhCharging timeApprox. 4 hMaximum pool area60 m²Filtration capacity7.5 m³/hFiltration typeTwo-stageTravel speedApprox. 16 m/minIngress protection classIPX8Water temperature10°C to 35°CCharging temperature5°C to 35°CMaximum water depth2.5 mDimensions330 × 308 × 228 mmWeight3.3 kgStorage temperature-20°C to 45°C

Wybot A1 wireless pool cleaning robot Wybot A1 is a state-of-the-art pool robot that provides effective and convenient cleaning of the pool bottom without manual intervention. Thanks to its dual drive, improved filtration system and intensive edge cleaning function, it can handle all kinds of debris - from sand to leaves and hair. It's the perfect solution for people who want to enjoy crystal-clear water without too much effort. Efficient operation and fast charging The Wybot A1 offers 120 minutes of continuous operation, which allows it to clean an area of up to 100 square meters regardless of its shape - it performs well in rectangular, round, kidney-shaped and other irregularly shaped pools. Once the cycle is complete, it takes only 2.5 hours to charge, making the device ready for another cleaning session in no time. Intelligent edge cleaning The robot is equipped with WINS Edge Cleaning, which makes it stop for a few seconds after touching the pool wall to clean the edges more thoroughly. This eliminates dirt from areas that are often overlooked by standard cleaners. Improved filtration system The Wybot A1 uses a two-layer filtration system that effectively catches all dirt, including sand, small leaves, pebbles, small twigs, hair and dust. The 180 µm filter captures even the smallest dirt particles, ensuring crystal clear water. For best results, it is recommended to clean the filter every 30 minutes in heavily soiled pools. Simple operation and LED indicators The robot is designed for maximum ease of use. Intuitive one-button controls allow for quick start-up, and built-in LED indicators show the operating status, battery level and selected cleaning mode. Lightweight design and easy removal Thanks to its compact design, the Wybot A1 is easy to handle and carry. It can be easily taken out of the water, making it a convenient solution for both above-ground and built-in pool owners. The robot works well in pools up to 3 meters deep. Versatility and eco-friendly solution Wybot A1 is designed for cleaning flat pool surfaces, regardless of the material - it performs well on vinyl, ceramic, mosaic, fiberglass, polyethylene and cement. Its performance not only saves time and energy, but also helps reduce the use of chemicals, making it an eco-friendly choice for any pool owner. Included Robot x1Lever x1Filter (cotton foam +180μm)Hook x1User manual x1Quick guide x1Charger x1Screw x1   ManufacturerWybotModelA1Pool dimensions80m2~100m2Working depthMax.3m and Min.60cmDimensions345*315*170mmWeight3.5kgOperating time2hCharging time2.5 hVoltage22.2VPower33WCharger input100-240V, 50-60HzCharger output25.2V/1ABattery capacity2600mAhFilterTwo-level filtrationFlow rate8.1 m3/HMovement speed16m/minWater resistanceIPX8

Wybot C1 Pro Wireless Pool Cleaning Robot The Wybot C1 Pro is an advanced cleaning robot that eliminates the need for manual pool cleaning, ensuring clean water with minimal effort. Thanks to intelligent algorithms and state-of-the-art sensors, it effectively removes debris from the bottom, walls, and waterline, leaving the pool in perfect condition. Controlling the robot is extremely simple thanks to a dedicated app that allows you to customize operating modes and tailor the device to your individual needs. In addition, the robot in 2024 Powerful motors and an innovative battery design The Wobot C1 Pro is equipped with three high-performance motors with a total power of 65 W, ensuring smooth movement across any surface. An innovative 25.9-V battery guarantees up to 120 minutes of runtime, allowing for thorough cleaning of even large pools in a single cycle. With its efficient energy management system, the device optimizes battery usage, extending runtime without the need for frequent charging. Fast Charging and Ready to Go You don’t have to wait long for the next cleaning session—the Wybot C1 Pro is equipped with a 5A high-current charging port that allows for a full charge in just 2.5 hours. This means that even if the battery runs out, the device will be ready to go again quickly, without long downtime. Advanced cleaning modes The Wybot C1 Pro offers advanced cleaning modes that allow it to fully adapt to the shape and size of your pool. The device uses intelligent navigation patterns, such as the N Path Pattern for the walls and the Cross Path Pattern for the pool floor, ensuring optimal coverage of the entire surface. Additionally, built-in infrared sensors improve navigation and prevent the robot from getting stuck on obstacles. The robot works with rectangular, round, and irregularly shaped pools. Effective at removing all types of debris The robot is designed to handle various types of debris. Thanks to two powerful scrubbing brushes, it effectively removes sand, leaves, dust, hair, small stones, and debris along the waterline. Getting caught on drains or other obstacles? That won’t happen with this device! Exceptional climbing ability The Vybot C1 Pro stands out for its excellent traction, allowing it to move effortlessly up vertical pool walls. This enables it to thoroughly remove sediment, algae, and dirt that can accumulate in hard-to-reach places. Sliding down the wall? Not with this model! Large-capacity filter and easy cleaning The robot is equipped with a top-loading filter, which makes cleaning it incredibly simple. Thanks to its large capacity, you don’t have to worry about emptying the bin frequently—the Wybot C1 Pro collects significant amounts of debris, and maintenance takes just a few moments. Intuitive app control With the dedicated WYBOT mobile app, you can control the robot right from your smartphone. The app lets you select cleaning modes, monitor progress, and customize settings to your preferences. Connection issues? Not with this model! The connection is stable, and the app responds instantly. Continuous OTA updates The manufacturer provides regular OTA updates, which means the Wybot C1 Pro can perform even better over time. Software updates improve the device’s performance, optimize its cleaning paths, and introduce new features, ensuring your pool robot always performs at its best. Included in the set Robot x1Filter basket x1Charger x1Quick Start Guide x1Hook x1Floating parts   ManufacturerWybotModelC1 ProPool DimensionsMax. 150 m²Depth4 mDevice dimensions372 × 360 × 240 mmWeight7.8 kgOperating time120 minCharging time2.5 hPower65 WCharger input100–240 V, 50–60 HzCharger Output25.2V/2.6ABattery Capacity4,600 mAhFilter180 µmFlow Rate115 m³/hTravel Speed11 m/minWater ResistanceIPX8App ConnectionAvailableOTA UpdateAvailable

Wybot C1 wireless swimming pool cleaning robot. Wybot C1 is a state-of-the-art cleaning device that provides comprehensive dirt removal from the bottom, walls and waterline of the pool. With its improved motor and dual scrubbing brushes, it effectively removes all dirt, leaving the water crystal clear. The fully cordless design makes use convenient and requires no complicated installation. Powerful suction and effective cleaning Wybot C1 is equipped with an advanced motor with increased power, which generates even greater suction power. Two scrubbing brushes effectively eliminate sediment, algae and dirt, guaranteeing a thorough cleaning in 150 minutes. It's ideal for those who want to enjoy a perfectly clean pool effortlessly. Intelligent cleaning modes The robot operates in the default mode, which first focuses on the pool walls, cleaning them according to the N Path Pattern, and then moves to the bottom, moving according to the CROSS Path Pattern. This ensures complete coverage of the pool and elimination of contaminants from every nook and cranny. Advanced filtration system Wybot C1 uses a two-level filtration system that effectively traps even fine dirt particles. The large dirt container allows for long operation without frequent emptying, and its design makes it easy to clean quickly and conveniently. Innovative solutions for greater efficiency Thanks to the Drain Cleaning function, the robot does not block on drains, eliminating the need for manual intervention. You can leave it in the pool and let it run smoothly. The robot works in rectangular, round and freeform pools with fiberglass, concrete, mosaic, vinyl or tile surfaces. Battery indicator in four colors The Wybot C1 is equipped with an easy-to-read LED indicator that indicates the battery status and operation of the device. During normal operation, the LED flashes blue, and when the battery reaches full charge, it turns solid green. During charging, the traffic light gradually cycles through different levels - when the charge level is between 81% and 99%, the LED flashes green, while below 80% it begins to pulsate yellow, giving a clear signal that further charging is needed. This simple and intuitive solution allows you to quickly assess the status of the robot and plan its next use accordingly. Wireless convenience and easy operation Wybot C1 is a fully wireless robot, which eliminates the problem of tangled cables. When it's finished working, it can be easily removed from the water and cleaned. It is an excellent choice for people who appreciate convenience, efficiency and modern technology. Included Robot x1Filter x1User manual x1Charger x1Quick reference guide x1Floating partsHook x1   ManufacturerWybotModelC1Pool dimension120m2~150m2Depth3mDimensions of the unit360*390*260 mmWeight8kgOperating time120min.~150min.Charging time3 hPower65WCharging input100-240V, 50-60HzCharging output25.2V/1.5ACapacity of acum.4600mAhFilter180μmFlow rate11.5 m3/HSpeed of movement16m/minWater resistanceIPX8App connectivityYesOTA updateYes

Wybot L1 wired pool cleaning robot Wybot L1 is a wired pool robot that combines 200W of suction power and a brushless motor for long life and reliability. It removes all kinds of debris - from fine dust to twigs and small leaves. Thanks to an efficient obstacle-crossing system, the device does not stop in hard-to-reach places, ensuring full coverage of the pool area. Intelligent route planning The robot is equipped with an advanced navigation system that allows it to move around the pool in an optimal way. The 95% surface coverage efficiency means that almost the entire pool will be thoroughly cleaned, it is even able to navigate stairs. And with the mobile app, users can select different cleaning modes and control the device in real time. Versatile cleaning Wybot L1 is not limited to cleaning the bottom only. The robot climbs the walls and cleans the water line, effectively removing sediment and dirt. It's a comprehensive solution that keeps the entire pool perfectly clean without the need to manually scrub the walls. The device cleans pools with surfaces made of cement, vinyl and mosaic. Dual-layer filtration system Thanks to the double-layer filtration system, the robot retains even the finest dirt. The 6-liter filter allows the robot to work longer without frequent emptying. This is ideal for pools that require regular and thorough cleaning. Spot cleaning function Some areas in the pool require special attention. With the spot cleaning function, the user can direct the robot to a specific spot to effectively remove stubborn dirt. This option makes the Wybot L1 even more effective. Control from the app Wybot L1 can be operated via a WiFi-enabled mobile app. The user can choose the cleaning mode, set the work schedule, as well as remotely control the robot. This allows the cleaning of the pool to be fully automatic, even when the user is away from home. Weekly cleaning schedule To make it easier to keep your pool clean, the robot offers a weekly programmer. You can set specific days and hours of operation, and the device will run itself at the designated time. This is perfect for people who want to enjoy a clean pool without having to remember to clean it regularly. One button to the water line Once the cleaning cycle is complete, the Wybot L1 automatically returns to the water line, making it easy to remove it from the pool. This way, the user doesn't have to dive or reach deep to extract the device. With one click in the app, the robot is in the right place for convenient extraction. Visible operation status The robot is equipped with an LED indicator that shows the working status of the device. The user always knows if the robot is in the process of cleaning, requires emptying the filter or has finished its work. This is an added convenience that makes daily operation of the device easier. Included Robot x1Power adapter x1Cable x 18mFloating partsUser manual x1Quick reference guide x1Filter x2Safety rope x1   ManufacturerWybotModelL1Pool dimensionsUp to 130m2Depth3mUnit dimensions503*463*275 mmWeight11 kgOperating time1 h/ 2 h/ 3 hInput voltageAC 100-240V, 50Hz/60HzOutput voltageDC 28VPower200WFiltrationTwo-levelFlow rate15m3/HMovement speed10m/min.Cable length18mWater resistanceIPX8OTA updateYesApp connectionYes