Chargers

Charger B6AC Neo The SkyRC B6AC Neo charger will surprise you with its vast capabilities. It can charge batteries with up to 200 watts (DC) or 60 watts (AC), as well as discharge them and monitor their condition. It stands out for its impressive performance and quiet operation, and thanks to the use of GaN technology it is extremely compact, making it much easier to transport. The device will also work well as a regular charger for a smartphone or laptop - it will provide power of up to 65 watts. Innovative GaN technology - high performance, small size The charger uses innovative GaN technology, so it combines high performance, efficient heat dissipation and a compact design. The device is smaller than a standard credit card, allowing for convenient, hassle-free transportation. You can carry it with you at all times! Impressive power Forget about the long wait until your batteries are charged. When the charger is powered by direct current (DC), it provides up to 200 watts of power, allowing you to reduce charging time to about 10 minutes. On the other hand, if you use alternating current (AC), the device's power will be a maximum of 60 watts. This will allow you to charge the battery in about 20 minutes! What's more, the XT60 DC interface and compatibility with 100-240 V AC provides more flexibility and freedom. Note: measurements were taken while charging a 6S LiPo battery with a capacity of 1300 mAh. Discharge your battery in a few moments Need to discharge a battery quickly? No problem - the B6AC Neo charger is equipped with a special port for efficient, effective discharging. Combined with the main port, it provides up to 19 watts of power. What does this mean in practice? For example, it only takes about 1.5 hours to discharge a 1300 mAh LiPo 6S battery. Remember, however, that if you choose to use only the main port, the power will be limited to 5 watts. Check the condition of your batteries Monitoring the condition of your batteries and taking proper care of them is the key to prolonging their life and ensuring your safety of use. The SkyRC B6AC Neo charger will help you do just that! With its help you can easily check the cell voltage and balance. This way you will always know if your battery needs charging, discharging or balancing! Note: the voltage and balance measurement function is available for LiPo, LiHV, LiFe and LiIon batteries. Universal charger and digital power supply With the SkyRC B6AC Neo charger you will charge not only your batteries, but also, for example, your smartphone, laptop or Nintendo Switch console. The device is equipped with an additional USB-C port, which supports PD 65 W fast charging. This allows your equipment to be up and running in no time! In addition, the B6AC Neo will prove itself as a digital power supply - it offers an optimal voltage of 2-27 V with 0.1 V increments and an adjustable current of 1-10 A. Performance and safety The charger uses a patented rectifier circuit to efficiently convert DC current for safe power supply. It also has a built-in MCU that precisely controls charging to minimize power loss. Its added advantage is an advanced protection system against short circuit, overheating and overvoltage, among others. So you can enjoy not only performance, but also safety! User-friendly Convenient operation of the charger is made possible by the built-in display with the new ColorX interface, which features a clear, responsive menu and specially designed, easy-to-read icons. What's more, you can choose from up to 5 languages - English, Dutch, French, Chinese and Japanese. Also noteworthy is the quiet operation of the device - even at full load the volume level of its fans is only about 48 dB. Don't be afraid of annoying noise! There is also a dedicated Charger Master app, which, among other things, allows you to conveniently update the charger's software - just connect it to your computer via a USB-C port.   ManufacturerSkyRCNameB6AC NeoModelSK-100200ColorBlackScreenTNScreen diagonal1.77 inchesActive area of the panel28.03 x 35.04 mmScreen resolution128x160pNumber of screen colors262KAC input voltage100 V - 240 V 50/60 HzDC input voltage10-30 VCharging powerDC: 200 W; AC: 60 W; QC3.0 / PD: 5 V ⎓ 3 A, 9 V ⎓ 3 A, 12 V ⎓ 3 A, 20 V ⎓ 3.25 A max. 65W;Discharge power19 W (at 6S, 4.2 V / S)Compatible batteriesLiPo / LiFe / LiIon / LiHV: 1-6 cells; NiMH / NiCd: 1-15 cells; Pb: 3S / 6S;Charging intensityLiPo / LiFe / LiIon / LiHV / NiMH / NiCd / Pb: 0,2-10 A;Discharge intensityLiPo / LiFe / LiIon / LiHV / NiMH / NiCd / Pb: 0,1-0,2 A;Balancing currentLiPo / LiFe / LiIon / LiHV: 500 A max;FeaturesLiPo / LiFe / LiIon / LiHV: Balance CHG, Charge, Storage, Discharge; NiMH / NiCd: Charge, Re-Peak, CYCLE_C_D, CYCLE_D_C, Discharge; Pb: Normal, AGM Charge, Cold Charge, Discharge;MaterialPC-ABS V0Dimensions70.6 x 50.6 x 46 mmWeight150 g

SkyRC iMax B6AC V2 charger SkyRC B6AC V2 is an improved version of the all-familiar iMax B6AC V1 charger. Compared to the B6AC V1 version, it is more stable and accurate, and has several new features. Users can set the voltage of the charger themselves, and control it with a PC. The charger has a current limit sensor, built-in resistance meter and lithium ion battery meter, temperature limit and charging time limit which makes the charger much safer than V1. SkyRC B6AC + V2 is a high-end microprocessor-based charger/discharger that is suitable for all types of batteries (LiPo,LiFE,Lilon). The maximum charging current is 6A, and the maximum power is 50A. Various operation modes and control from PC The user has the ability to monitor the voltage of packs, individual cells and many other functions to which I have a graphical view thanks to the recommended application from SkyRC. Included: Charger Power cable T-ended cable terminated with: banana plug, bananas, crocodiles, futaba plug, JST plug, XT60 plug Weight 632 g Input voltage AC100-240 V /DC 11-18 V Max. Charging 50 W Max. Discharge 5 W Charging current range 0.1-6 A Discharge current range 0.1-2 A Battery voltage PB 2-20 V LiPo/LiFe/Lilon/LiHV number of chargeable cells 1-6 S NiMH/NiCd number of charged cells 1-15 S

Charger SkyRC Q200neo The innovative SkyRC Q200neo charger is the perfect choice for every RC enthusiast. It allows you to charge 4 different batteries simultaneously and can be powered by both direct current (DC) and alternating current (AC). It stands out with a power of up to 400 W and a built-in high-precision balancer that optimizes voltage equalization within ±0.02 V. Despite its powerful capabilities, the product is surprisingly compact and portable. Charge 4 Batteries Simultaneously The Q200neo charger allows you to charge batteries with different chemical compositions, such as LiPo, LiFe, Li-Ion, LiHV, Pb, NiMH, or NiCd. This makes you ready for any situation, whether you are an RC professional or an amateur. You also don't have to worry about the device overheating. The charger is equipped with an advanced thermal system with a fan, allowing it to efficiently dissipate heat and maintain an optimal temperature. Two Power Options Enjoy greater flexibility – whether you are working in your garage or out in the field. The charger allows you to choose between AC and DC power sources, so you can use it in various scenarios. In AC mode, the device can reach up to 200 W of power, while in DC mode, it can go up to 400 W. With up to 100 W per port, you can charge your batteries in record time. Intelligent Energy Distribution If you choose AC power and use only two ports, the charger will provide maximum power to them. When using all four ports, energy will be dynamically and intelligently distributed among each of them. When one of the batteries is already charged, the Q200neo model will start charging the others even faster. This ensures optimal charging performance in almost any situation. Discharge Function and Digital Power Supply Whether you want to prepare your batteries for storage, balance their voltage levels, or discharge them after use, the SkyRC charger is here to help! The device allows for quick and safe discharge with a power of up to 25 W. You can easily take care of your battery's health and extend its lifespan. The Q200 neo model also serves as a versatile digital power supply with four outputs. It allows you to adjust the voltage in the range of 1-30 V with a precision of 0.1 V. You can also set the current from 0.1 A to 10 A with a precision of 0.1 A. This makes it an ideal solution for various testing and prototyping applications in RC modeling! Thoughtful Design Impressive performance, up to 4 independent battery charging ports, and the ability to power it in two ways – all packed into a convenient, compact design. The Q200neo charger is 60% lighter than its predecessor, the Q200. It also stands out with a modern design and distinctive color. Moreover, the product uses a special MCU (Microcontroller Unit) module that precisely controls charging, minimizing energy losses. It is also protected against short circuits, overheating, and overvoltage, and its housing is made of flame-resistant material. Additional Features The charger is equipped with an additional USB-C port that supports fast PD 3.0 20 W charging. So, you can quickly charge your smartphone, tablet, or even laptop! The Q200neo model also has a built-in ARM 200 MHz microcontroller, which improves the ADC (Analog-to-Digital Converter) resolution to 16 bits. Furthermore, the efficient PID (Proportional-Integral-Derivative) mechanism allows precise current tuning, increasing charging speed. The charger will also come in handy during your travels – its input circuit has universal voltage, so you don't need a 110V – 220V converter when you're abroad! Convenient Operation The charger is very user-friendly and easy to operate. Its clear interface is available in multiple languages, including English and French. Convenient device control is made possible by the dedicated Charge Master application, which can be installed on a computer or smartphone. It allows you to adjust charging parameters, check battery conditions, and update the charger's firmware, among other functions. The Q200neo model can connect to devices in two ways – via a USB-C cable or wirelessly through Bluetooth. In the box Charger AC Power Cable User Manual Brand SkyRC Model Q200neo Display Type TN Display Size 2.8" Active Panel Area 43.2 x 57.6 mm Screen Resolution 240x320p Number of Colors 262k DC Input Voltage 10-30 V AC Input Voltage 100-240 V Charging Power AC: Up to 200 W;DC: Up to 400 W; Discharge Power Main Port: 5 W;Balance Port: Up to 25 W (LiPo/6S); USB-C Port QC3.0: 5 V - 3 A, 9 V - 2 A, 12 V - 1.5 A, 18 W;PD: 5 V - 3 A, 9 V - 2.2 A, 12 V - 1.67 A, 20 W; DC Power Output Output Voltage: 1-30 V;Output Current: 0.1-10 A;Output Power: Up to 100 W per port; Compatible Batteries LiPo / LiHV / LiFe / Li-Ion: 1-6 cells;NiMH / NiCd: 2-15 cells;Pb: 3S / 6S / 12S; Charging Current LiPo / LiFe / Li-Ion / LiHV / NiMH / NiCd / Pb: 0.1-2 A; Balancing Current LiPo / LiFe / Li-Ion / LiHV: Up to 800 mA; Functions LiPo / LiFe / Li-Ion / LiHV: CHG balance, charge, discharge to storage;NiMH / NiCd: charge, Re-Peak, CYCLE_C_D, CYCLE_D_C, discharge;Pb: charge, AGM charge, Cold Charge, discharge; Material PC-ABS V0 Dimensions 123 x 119 x 78 mm Weight 680 g Application Charge Master

Gens Ace IMARS D300 G-Tech Channel AC/DC 300W/700W RC Charger (Black). IMARS D300 is a versatile and smart charger designed for G-Tech Eco smart batteries. It is also compatible with other batteries. It automatically identifies G-Tech battery type, voltage and charging current, making the process easier. It has seven operating modes, including charging, discharging, balancing and more. With dual-channel AC/DC charging portable design and large IPS display, it is easy to use and operate. It offers high charging power, advanced safety features and G-Tech smart charging support. Included chargerAC cableXT60-T adapterXT60-EC5 adapteradapter XT60-EC3   ManufacturerGens AceModelGEA300WD300-EWColorblackInput voltageAC 100-240V; DC 7-30VOutput voltageDC 1~30VMax input currentDC 34AMax. discharge power15W x2Maximum charging powerAC 300W; DC 350W x2Charging current0.1-16A x2Discharge current0.1~3A x2Cell balancing1~6sUSB Output5V / 2.4ADisplay type2.4-inch IPS LCD displaySupported BatteriesLiPo / LiHV / LiFe 1~6S; NiMH 1~16SDimensions145 × 76 × 62 mmWeight530 g

Gens Ace IMARS D300 G-Tech Channel AC/DC 300W/700W RC White Charger. IMARS D300 is a versatile and smart charger designed for G-Tech Eco smart batteries. It is also compatible with other batteries. It automatically identifies G-Tech battery type, voltage and charging current, making the process easier. It has seven operating modes, including charging, discharging, balancing and more. With dual-channel AC/DC charging portable design and large IPS display, it is easy to use and operate. It offers high charging power, advanced safety features and G-Tech smart charging support. Included chargerAC cableXT60-T adapterXT60-EC5 adapteradapter XT60-EC3   ManufacturerGens AceModelGEA300WD300-EWColorwhiteInput voltageAC 100-240V; DC 7-30VOutput voltageDC 1~30VMax input currentDC 34AMax. discharge power15W x2Maximum charging powerAC 300W; DC 350W x2Charging current0.1-16A x2Discharge current0.1~3A x2Cell balancing1~6sUSB Output5V / 2.4ADisplay type2.4-inch IPS LCD displaySupported BatteriesLiPo / LiHV / LiFe 1~6S; NiMH 1~16SDimensions145 × 76 × 62 mmWeight530 g

SkyRC B6neo+ Smart Charger The SkyRC B6neo+ smart charger is a compact device designed for charging and servicing many types of batteries used in RC modeling and consumer electronics, among other applications. Its small size, high charging power, and clear color display make it convenient to use both at home and in the field. The charger supports popular battery types, software updates, and a clear interface, making it easy to adjust the settings to your needs. Compact design and high performance The SkyRC B6neo+ is designed with mobility in mind. The PC-ABS V0 plastic housing is lightweight and durable, and its small size means it fits easily into a model bag or backpack. Despite its compact size, the charger offers up to 240 W of charging power with DC power and up to 126 W with Power Delivery, allowing for efficient charging of various battery packs. Support for multiple battery types The charger is designed to work with a wide range of batteries, such as LiPo, LiFe, LiIon, LiHV, NiMH, NiCd, and Pb. This allows a single device to handle multiple applications, from model packs to batteries used in various electronic devices. The ability to charge packs with up to 6 cells in the case of lithium batteries gives you great flexibility in configuring your kit. Clear color display The device is equipped with a 1.77-inch TN screen with a resolution of 128 × 160 pixels. The display supports over 260,000 colors, making all information clear and legible. The ColorX interface uses modern styling and intuitive icons, making it easy to navigate through settings and start charging quickly. Updates and convenient operation The B6neo+ allows you to update the software via the USB-C port using the Charger Master app. This allows you to easily add new features and fixes to improve compatibility and stability. The interface supports several languages, includingEnglishEnglish, French, Dutch, Chinese, and Japanese, making it easy to use the device in different regions. Built-in battery tester When connected to the balancer port, the charger can also function as a battery tester. The device displays the voltage of the entire pack and the voltage of individual cells, making it easy to check the condition of the battery and assess whether it needs balancing or recharging. This solution helps to ensure safety and extend battery life. Quiet operation and stable cooling The charger is equipped with a fan cooling system that generates a maximum of approximately 48 dB of noise even at full load. This allows the device to run in the background while charging, without disturbing your work or rest. Efficient power supply system The device uses a proprietary rectifier system that efficiently converts DC power into the stable voltage needed to charge batteries. Precise control of the process by a built-in microcontroller reduces energy losses and maintains high efficiency while keeping the device small.   ManufacturerSkyRCModelB6neo+HousingPC-ABS V0Dimensions70 × 50 × 31 mmWeight82 gDisplay typeTN; 1.77 inchesActive display area28.03 × 35.04 mmDisplay resolution128 × 160 pxNumber of colors262KPower supplyDC: 5–30 V, PD3.0 / PD3.1: 5–28 VCharging powerDC: up to 240 W, PD: up to 126 WDischarge powermax. 16 W (for 6S 4.2 V/S pack)Supported batteriesLiPo / LiFe / LiIon / LiHV: 1–6S, NiMH / NiCd: 2–15S, Pb: 3S / 6S / 12SCharging current0.3–10.0 ADischarging currentup to 0.6 ABalancing currentmax. 600 mA

SkyRC D100neo Charger The SkyRC D100neo Charger is equipped with 2 ports, allowing simultaneous charging with a power of 200W when using DC power supply. It supports various types of batteries, including LiPo, LiFe, Li-ion, LiHV, NiMH, and NiCd, and provides voltage balancing function with an accuracy of ±0.02V. The device's performance is also influenced by the high-resolution color display and user-friendly interface, ensuring ease of use. The product is also equipped with a USB-C port with 20W Power Delivery for fast charging. Advanced protective features ensure safe operation. Impressive Power in a Compact Form Each of the D100neo ports supports a current of up to 10A, allowing for fast and efficient charging of 2 batteries simultaneously. Thanks to intelligent power management, the charger maintains stability and accuracy of charging even at full load, ensuring evenly charged cells and extending their lifespan. The device's output power is up to 200W (requires DC power supply), further increasing energy renewal efficiency. Despite impressive specifications, the product stands out with its compact design, being 40% smaller than standard chargers. It also features a color display with an impressive 76,800 pixels, providing convenient access to essential information. Optimal Power Management The SkyRC D100neo Charger combines efficient charging with up to 25W of power and advanced discharging with voltage balancing capability, ensuring optimal battery condition and longevity. The device automatically allocates power between the ports, maximizing the charging efficiency of individual batteries and providing fast charging when using both ports simultaneously. It also provides balancing accuracy up to ±0.02V, guaranteeing voltage optimization for each cell, crucial for extending their lifespan and maintaining full capacity. Versatility The D100neo can operate in both AC and DC modes. When powered by AC, power is dynamically distributed between the ports up to a total of 100W, while with DC power supply, each port can reach a full 100W, significantly speeding up the charging process. When both ports are used simultaneously, the charger intelligently manages available power. After one port completes charging, the other receives increased power, maximizing the efficiency of the entire process. Additionally, the device can function as a digital power source with adjustable voltage and current, making it suitable not only for hobbyists but also for electronics enthusiasts and DIYers. Fast Charging With the USB-C PD 3.0 port supporting up to 20W of power, RC model enthusiasts can enjoy significantly accelerated charging for their devices, such as smartphones, tablets, and 2020 MacBook Airs. Safety and User-Friendliness Protection against overcharging and overloading ensures complete safety during charger operation. An innovative thermal system allows the Arm Cortex-M4 processor to operate at high loads without generating disturbing noise. The ColorX interface guarantees ease of use and allows settings adjustments in multiple languages. Additionally, firmware updates can be performed smoothly and effortlessly through USB-C, ensuring that the device is always up to date with the latest software. Another advantage is the universal input voltage (from 110V to 220V), allowing you to take the D100neo model on your travels. Seamless Connection The USB-C port allows for convenient connection of the D100neo charger to a PC or Mac. Using the Charger Master app, you can customize charging parameters, monitor battery status, and optimize performance. Furthermore, software updates are performed smoothly, making it easy to enhance your charger's capabilities. Manufacturer SkyRC Model SK-100199-01 SIZE AND WEIGHT Case Material PC-ABS V0 Case Size 116 x 110 x 79 mm Weight 470 g DISPLAY Display Type TN Size 2.8 inches Panel Active Area 43.20 x 57.60 mm Resolution 240x320 pixels Number of Colors 262,000 POWER DC Input Voltage 10-30V AC Input Voltage 100-240V Charger Power AC: 100W MAX; DC: 200W MAX Discharge Power Main Port: 5W; Balance Port: 25W MAX (LiPo/6S) 20W USB-C Power Delivery Charging QC3.0: 5V⎓3A, 9V⎓2A, 12V⎓1.5A 18W; PD: 5V⎓3A, 9V⎓2.2A, 12V⎓1.67A 20W BATTERY Battery Types/Cells LiPo/LiHV/LiFe/LiIon: 1-6 cells; NiMH/NiCd: 1-15 cells; Pb: 3S/6S/12S CHARGE AND DISCHARGE Charge Current LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb: 0.2-10.0A Discharge Current LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb: 0.1-2.0A Balance Current LiPo/LiFe/LiIon/LiHV: 1.0A MAX Operation LiPo/LiFe/LiIon/LiHV: Balance CHG, Charge, Storage, Discharge; NiMH/NiCd: Charge, Re-Peak, CYCLE_C_D, CYCLE_D_C, Discharge; Pb: Normal, AGM Charge, Cold Charge, Discharge

SkyRC Charger The SkyRC D750 MIX is an advanced model charger designed for users who need high power, multiple operating modes, and convenient operation. The device supports two independent charging channels, allowing you to charge two battery packs simultaneously. The built-in AC power supply and the ability to work with an external DC power supply make the charger suitable for use in the workshop, on the track, or in the field. A modern screen, a clear interface, and numerous safety features make it easy to control the charging process. The D750 MIX also offers additional solutions, such as a USB-C PD port and wireless smartphone charging, which increases the functionality of the device in everyday use. Two independent charging channels The SkyRC D750 MIX is equipped with two fully independent charging channels. Each of them can work separately, allowing the user to charge two different battery packs with different parameters at the same time. This solution reduces the time needed to prepare the equipment and increases convenience when working with a larger number of batteries. The high output power allows the charger to handle both smaller packs and large batteries used in RC models. AC and DC power operation The charger has a built-in power supply, so it can be plugged directly into a wall outlet. At the same time, the device also supports DC power, which allows it to be used, for example, in the field with an external power supply or battery. This flexibility makes the D750 MIX suitable for use in a home workshop as well as during competitions or modeling trips. Support for multiple battery types The device supports the most popular types of batteries used in modeling. This allows a single charger to support different models and devices without the need for several separate chargers. Advanced charging algorithms ensure the correct process and cell safety. Clear screen and convenient operation The color display provides a clear overview of all charging parameters. The user can monitor the voltage, current, capacity, and operating time in real time. The intuitive menu allows you to quickly change settings and adjust the operating mode to a specific battery. Additional features – charging mobile devices The SkyRC D750 MIX is not just a charger for model batteries. The housing features a USB-C port with Power Delivery support and a wireless charging module. This allows you to conveniently charge your smartphone or other mobile devices without the need for additional chargers. This is a practical solution, especially when working in a workshop or on a model track.   ManufacturerSkyRCModelD750 MIXDevice typetwo-channel AC/DC model chargerAC power supply100–240 VDC power supply10–30 VNumber of channels2 independent channelsCharging power (DC)up to 1100 W per channelCharging power (AC)up to approx. 500 W totalCharging currentup to 32 A per channelDischarge current45 WSupported batteriesLiPo, LiHV, LiIon, LiFe, NiMH, NiCd, PbUSB portUSB-C PD up to 20 WDisplaycolor LCD screenHousing materialPC-ABS V0Dimensions180 × 136 × 112 mmWeight1626 g

SkyRC Charger The SkyRC e3S charger is a compact and easy-to-use device designed for charging lithium batteries used, among others, in RC models. It supports popular LiPo, LiHV, and LiFe battery types in 2S and 3S configurations. Thanks to the automatic charging process and built-in balancer, it allows you to conveniently and safely prepare batteries for use. Its small size and mains power supply make the charger suitable for use both at home and in a model workshop. Simple operation and automatic charging process The SkyRC e3S has been designed for ease of use. The device has a single mode button that allows you to select the appropriate battery type. When the battery is connected, the charger automatically starts the charging process, maintaining the appropriate current and voltage parameters. This means that the user does not have to manually configure the settings, which greatly facilitates everyday use. Built-in cell balancer The charger is equipped with a balancing function that controls the voltage of individual cells in the pack. As a result, all cells are charged evenly, which helps to maintain stable battery performance and can extend its life. The maximum balancing current is 300 mA, which ensures effective control of the charging process. Compatibility with popular batteries The e3S model supports three popular types of lithium batteries: LiPo, LiHV, and LiFe. This allows it to be used with many batteries used in RC modeling. The charger supports 2S and 3S packs, and the charging current is automatically selected depending on the number of cells. Compact design The device is small and weighs about 104 g, so it does not take up much space on your workstation. The housing is equipped with ventilation holes that help dissipate heat during charging, which contributes to the stable operation of the device. Battery storage mode The charger also offers a Storage mode for LiPo and LiHV batteries. This function brings the battery voltage to a level suitable for long-term storage. In practice, this means less cell wear and greater safety when storing batteries.   ManufacturerSkyRCModele3SPower supplyInput: AC 100–240 V; Frequency: 50/60 HzSupported batteriesLiPo / LiHV / LiFeNumber of cells2S, 3S2S charging current2.20 A ±10% (constant)3S charging current1.60 A ±10% (constant)Charging power20 W ±2 WSupported batteries in Storage modeLiPo / LiHVMaximum discharge current150 mADischarge power2 WMaximum balancing current300 mAOperating temperature0°C – 40°COperating humidity5–75% RH (non-condensing)Storage temperature-10°C – 70°CStorage humidity5–75% RH (non-condensing)Housing dimensions92 × 58 × 36 mmWeight104 g

SkyRC MC5000 USB-C Cylindrical Battery Charger and Analyzer The SkyRC MC5000 is an advanced charger and tester for cylindrical batteries that not only charges cells but also accurately checks their condition and actual capacity. The device supports many popular battery types, offering a wide range of diagnostic functions and the ability to precisely control the charging and discharging process. Thanks to its clear display and mobile app, you have full insight into the operating parameters and condition of the cells. The device is powered via USB-C. One device—many functions The SkyRC MC5000 combines the functions of a charger, analyzer, and battery tester. The device allows you to charge, discharge, refresh, and measure the actual capacity of the cells. This enables you not only to prepare the batteries for use but also to assess their condition and detect worn-out or damaged cells. This solution is particularly useful for users who rely on multiple batteries—in photography equipment, model-making, electronics, or flashlights. Support for Multiple Battery Types The charger is designed to work with various types of cylindrical batteries. It supports, among others, Li-ion, NiMH, NiCd, LiFe, and NiZn cells, which significantly increases its versatility. Adjustable guides allow you to accommodate many popular cell sizes, such as 18650, 21700, and classic AA and AAA. As a result, a single charger can replace several separate devices designed for different battery types. Precise Charging Control Each of the four slots operates independently, meaning you can set different parameters for each battery. You can adjust the charging and discharging current, allowing you to tailor the process to a specific cell type. This solution enhances operational safety and helps extend the life of the batteries by ensuring they are charged under optimal conditions. Easy-to-read display and mobile app The large LCD screen displays key information about the device’s operation. On the display, you can check, among other things, voltage, current, capacity, and charging or discharging time. Additionally, the charger can connect to a mobile app via Bluetooth. This allows you to conveniently monitor the device’s operation, change settings, and analyze parameters directly from your smartphone. Analysis and testing functions The SkyRC MC5000 offers several operating modes that allow for thorough battery testing. Capacity measurement mode allows you to determine a cell’s actual capacity, while refresh mode helps restore performance in older batteries. Thanks to these features, you can quickly assess the condition of your cells and decide which ones are still suitable for use.   ManufacturerSkyRCModelMC5000Device TypeCylindrical battery charger and analyzerSupported Battery TypesLi-ion, Li-ion HV, LiFe, NiMH, NiCd, eneloop, NiZn, RAM, LTO, Na-ionSupported Cell SizesAA, AAA, 18650, 21700, and other cylindrical cells with similar dimensionsNumber of Slots4 independent channelsDisplay240x320 px LCDConnectivityBluetooth, USB-CCharging current range0.05 A – 5.00 ADischarging current range0.05 A – 2.00 AMaximum charging power80 WMaximum discharge power20 WAC power input100 – 240 V; 50 / 60 HzUSB outputUSB-C Power Delivery 3.0 up to 65 WHousing Dimensions188 × 122 × 65 mmWeightApproximately 665 g

Cylindrical battery charger and analyzer SkyRC MC5000 is an advanced cylindrical battery charger and tester that not only charges cells, but also accurately checks their condition and actual capacity. The device supports many popular battery types, offering a wide range of diagnostic functions and the ability to precisely control the charging and discharging process. Thanks to the clear display and mobile app, the user has full insight into the operating parameters and condition of the cells. One device – many functions The SkyRC MC5000 combines the functions of a charger, analyzer, and battery tester. The device allows you to charge, discharge, refresh, and measure the actual capacity of the cells. This allows you not only to prepare the batteries for use, but also to assess their condition and detect worn or damaged cells. This solution is particularly useful for users who use a large number of batteries – in photographic equipment, model making, electronics, or flashlights. Support for multiple battery types The charger is designed to work with various types of cylindrical batteries. It supports Li-ion, NiMH, NiCd, LiFe, and NiZn cells, among others, which significantly increases its versatility. Adjustable guides allow you to place many popular cell sizes in it, such as 18650, 21700, or classic AA and AAA. This allows one charger to replace several separate devices designed for different types of batteries. Precise charging control Each of the four slots operates independently, which means that different parameters can be set for each battery. The user can adjust the charging and discharging current, allowing the process to be tailored to the specific type of cell. This solution increases operational safety and helps to extend the life of the batteries, as they can be charged under optimal conditions. Clear display and mobile app The large LCD screen displays the most important information about the device's operation. The display shows, among other things, voltage, current, capacity, and charging or discharging time. In addition, the charger can work with a mobile app via Bluetooth. This allows you to conveniently monitor the device's operation, change settings, and analyze parameters directly from your smartphone. Analysis and testing functions The SkyRC MC5000 offers several operating modes that allow you to thoroughly check your batteries. The capacity measurement mode allows you to determine the actual performance of the cell, while the refresh mode helps restore the efficiency of older batteries. With these features, you can quickly assess the condition of your cells and decide which ones are still usable.   ManufacturerSkyRCModelMC5000Device typeCylindrical battery charger and analyzerSupported battery types:Li-ion, Li-ion HV, LiFe, NiMH, NiCd, eneloop, NiZn, RAM, LTO, Na-ionSupported cell sizesAA, AAA, 18650, 21700, and other cylindrical cells with similar dimensionsNumber of slots4 independent channelsDisplayLCD 240x320 pxConnectivityBluetoothCharging current range0.05 A – 5.00 ADischarge current range0.05 A – 2.00 AMaximum charging power80 WMaximum discharge power20 WAC power input100 – 240 V; 50 / 60 HzUSB outputUSB-C Power Delivery 3.0 up to 65 WCase dimensions188 × 122 × 65 mmWeightapprox. 665 g

SkyRC NC3000 Pro Charger SkyRC NC3000 Pro is an advanced charger for NiMH and NiCd batteries, combining high performance with full control over the charging process. Support for PD (Power Delivery) and QC (Quick Charge) standards allows for very high operating power and charging up to 3000 mA per cell. The device offers four independent slots, up to 6 intelligent operating modes, adjustable charging and discharging current, automatic adjustment of parameters to the condition of the battery, and convenient control from a mobile app via Bluetooth. Added to this is an active cooling system, advanced security features, and battery regeneration and testing functions. All this makes the NC3000 Pro a comprehensive tool for energy management at home, in the workshop, or in professional applications. 6 smart operating modes – adjust charging to the battery condition The charger is equipped with six advanced operating modes that allow you to precisely adjust the charging process to the condition and application of the battery. Turbo mode allows you to prepare the battery for operation very quickly when every minute counts. Standard Charge mode is responsible for safe and efficient charging in everyday use. The Discharge function allows you to control the discharge of the battery, which helps to keep it in good condition. MaxBoost mode maximizes battery performance through appropriately programmed operating cycles. Break-in is designed to format new or long-unused cells, while Cycle automatically performs charge and discharge cycles to help regenerate and test the battery. This gives you full control over the performance and life of your batteries. Four independent slots – complete charging freedom The SkyRC NC3000 Pro offers four independent channels for AA and AAA batteries, allowing you to charge several batteries with different parameters and in different states of wear at the same time. Each slot operates independently, so you can set different parameters for each cell and monitor its operation separately. Adjustable charging current in the range from 0.20 A to 3.0 A with an accuracy of 0.1 A allows you to perfectly match the charging process to the capacity and condition of the battery. This solution provides greater flexibility and significantly improves the efficiency of working with batteries. Lightning-fast operation thanks to PD and Quick Charge The charger uses modern Power Delivery and Quick Charge standards, which guarantee fast and stable power delivery. When powered by PD, the device can charge each cell with up to 3000 mA while simultaneously discharging four batteries with up to 2500 mA per slot. The maximum charging power is 22 W, while the maximum discharging power is 15 W. This means that even heavily used batteries can be quickly prepared for further use. Intuitive control and convenient operation The NC3000 Pro has been designed with everyday convenience in mind. The device is equipped with a precise aluminum control knob that allows you to quickly navigate the menu and change settings. The modern ColorX interface with clear icons and a transparent layout makes the charger easy and intuitive to use, even for those who have not previously used advanced battery chargers. Clear LED indicators – operating status at your fingertips The charger is equipped with intuitive LED indicators that allow you to quickly check the operating status of the device. A single glance is enough to find out whether the battery is currently charging, whether the process has been completed, or whether it is being discharged. This allows the user to easily control the entire process without having to constantly check the detailed parameters in the menu. Battery regeneration – longer battery life The charger's advanced features allow you to restore the performance of many worn-out batteries. Using the Cycle mode, you can perform several charging and discharging cycles to help recover some of the lost capacity. If the improvement is not sufficient, the Break-in mode allows you to perform a thorough battery conditioning process. This allows many batteries to regain their efficiency and continue to work in devices, saving money and reducing electronic waste. Battery formatting – the perfect start for new cells The formatting process involves activating the battery using small charging and discharging currents in a CDC sequence. In the NC3000 Pro charger, this can be conveniently performed in Break-in mode. This allows new or long-unused batteries to achieve stable operating parameters and full performance, which translates into longer life and more predictable operation. Matching batteries for maximum device performance In many electronic devices, batteries work in pairs or larger sets. If one of them has a significantly lower capacity, it limits the operating time of the entire device. The NC3000 Pro allows you to check the actual capacity of the batteries and match them in terms of parameters. This allows you to create sets of batteries with similar performance, which significantly improves the stability of the equipment and extends its operating time. Intelligent cooling – high power without overheating Efficient operation at high charging currents requires effective heat dissipation. Inside the NC3000 Pro housing, there is a dual fan system that automatically adjusts the operating speed to the current load. This keeps the charger cool even during intensive use, while operating very quietly. Advanced protection and intelligent FlexiPulse algorithm SkyRC has incorporated advanced safety systems into this model to protect both the device and the batteries. The charger has protection against too low and too high input voltage, voltage alarms, and capacity protection that prevents overcharging or excessive discharge of the battery. In addition, the innovative FlexiPulse algorithm monitors the internal resistance of the batteries and automatically reduces the charging current if it increases. This reduces cell heating and significantly improves the safety of the entire process. Smartphone control and data analysis in the app The NC3000 Pro has a built-in Bluetooth module that allows you to connect the charger to your smartphone. The free SkyCharger app offers a convenient graphical interface that allows you to monitor the charging process in real time. Users can analyze battery performance graphs, record charging history, and more accurately control battery operating parameters. This makes energy management even easier and more informed. Included: ChargerUser manual   General specifications ManufacturerSkyRCModelNC3000 ProProduct typeBattery chargerSupported battery typesNiMH, NiCdSupported battery sizesAA, AAANumber of charging slots4 independent channelsNumber of operating modes6Supported power protocolsPD (Power Delivery), QC2.0, QC3.0, PD3.0Supported battery capacity100–5000 mAhDimensions134 × 105 × 61 mmWeightapprox. 380 gInternal resistance measurementYes (FlexiPulse algorithm)Temperature management algorithmAutomatic charging current adjustmentCooling systemDual fan with intelligent speed controlControlAluminum knob + ColorX interfaceWireless connectivityBluetoothMobile appSkyChargerBattery analysis functionsCapacity measurement, charge/discharge cycles, performance analysisOvercharge protectionYesOver-discharge protectionYes   Technical specifications Charge current range0.20 – 3.00 A (adjustable in 0.10 A increments)Discharge current range0.20 – 2.50 A (adjustable in 0.10 A increments)Trickle charge10 – 300 mA / OFFMaximum charging current per slot3000 mAMaximum discharge current per slot2500 mAMaximum charging power22 WMaximum discharge power15 WMaximum input power30 WTarget charging voltage1.47 – 1.80 VDischarge cut-off voltage0.50 – 1.10 VΔV detection1 – 20 mVLow input voltage protection< 4.7 V ± 0.3 VHigh input voltage protection22 V ± 0.3 V

Dual-channel lithium battery charger The SkyRC PC1080neo is an advanced charger designed for LiPo and LiHV lithium batteries. The device has been designed for users who require high power, precise charging, and convenient operation. With two independent channels and a total power of 1080 W, it allows you to charge two battery packs simultaneously, which significantly reduces the time needed to prepare your equipment for use. High power and two independent channels The charger offers a total output power of up to 1080 W, or 540 W per channel. This makes it possible to quickly charge even large battery packs used in drones and professional equipment, among other things. Each channel operates independently, so you can charge two batteries simultaneously with different parameters. The charging current range from 1 to 20 A allows you to adjust the process to a specific pack. Support for LiPo and LiHV batteries The PC1080neo model is compatible with LiPo and LiHV batteries with up to 6 cells. The charger allows for a wide range of final voltage adjustment, so you can adjust the parameters to different types of packs. For LiHV batteries, the voltage can be adjusted from 4.25 V to 4.50 V per cell, allowing for greater capacity while maintaining control over charging safety. Different operating modes to suit your needs The charger offers several operating modes to suit your current needs. Fast charging mode reduces the time it takes to prepare the battery for use. Balancing mode equalizes the voltage of individual cells, improving the performance and life of the pack. There is also a Storage mode, which sets the optimal voltage for long-term battery storage. Clear display and simple operation The device is equipped with a 2.8-inch color display with a resolution of 320 × 240 pixels. The screen is set at a 65° angle, so all information is clearly visible during operation. The interface shows parameters such as voltage, current, capacity, and charge level in real time, which facilitates control of the entire process. Precision operation thanks to the Cortex-M3 processor At the heart of the charger is an ARM Cortex-M3 processor, which is responsible for stability and accuracy of operation. This allows the device to precisely control the charging voltage and current, ensuring a safe and stable process. Cell balancing precision reaches up to ±10 mV per cell in balancing mode. Efficient and stable operation thanks to Active PFC The use of Active PFC technology increases the energy efficiency of the device. This function stabilizes the input voltage and reduces interference in the electrical network. As a result, the charger achieves high energy conversion efficiency of around 90%. Universal power supply The charger supports a wide input voltage range from 100 to 240 V at 50/60 Hz. This allows it to be used in different countries without the need for additional voltage converters. Security system The SkyRC PC1080neo is equipped with an extensive set of security features that protect both the charger and the batteries. The Multi Safe Circuit system includes protection against short circuits, reverse polarity, overheating, overvoltage, and overcharging. In addition, a timeout feature and automatic shutdown in case of malfunction are included. Software update The device can be updated via the USB-C port using the Charger Master application available for Windows and macOS. This allows the user to easily update the firmware and improve the compatibility and functionality of the charger.   ManufacturerSkyRCModelPC1080neoDevice typeDual-channel lithium battery chargerInput voltageAC 100–240 V, 50/60 HzCharging power1080 W (540 W × 2) ±10%Supported batteriesLiPo / LiHV – up to 6SLiPo cut-off voltage4.15–4.25 V / cell (default 4.20 V)LiHV cut-off voltage4.25–4.50 V / cell (default 4.35 V)Storage mode voltage3.90 V ± 0.05 V / cellCharging current1 – 20 ABalancing current200 mA – 1800 mADisplay2.8 inches, 320 × 240 px, colorDimensions255 × 124.5 × 120 mmWeight2.43 kg

Multifunctional smart AC/DC charger The SkyRC Q100neo charger is a compact but highly functional device designed for users of RC models, drones, and other devices that use model batteries. With four independent charging ports, it allows you to charge several packs at the same time, which significantly reduces the time needed to prepare your equipment for operation. The device works with many types of batteries and offers precise control of charging parameters, ensuring safe and efficient use. Four independent charging channels One of the most important features of the Q100neo is its ability to charge up to four batteries simultaneously. Each port operates independently and can deliver up to 6 A of charging current. This allows the user to charge different packs at the same time without having to wait for one process to finish. This is a practical solution, especially during training, competitions, or intensive use of RC models. Compact design and high power Despite its small size, the charger offers high performance. When powered by AC, it reaches up to 100 W, while when powered by DC, it reaches up to 240 W. This allows you to quickly charge batteries and reduce the time between uses of the equipment. The small housing makes the device easy to take with you in the field or to the model track. AC/DC power supply – greater flexibility The SkyRC Q100neo can operate with both mains power and an external power source. This makes it suitable for use at home, in the workshop, and in the field. Simply connect it to the mains or a DC source to quickly prepare your batteries for use. Support for multiple battery types The charger supports a wide range of battery chemistries, such as LiPo, Li-ion, LiFe, LiHV, Pb, NiMH, and NiCd. This allows a single device to support various packs used in modeling, electronics, and other applications. It is a convenient solution for those who use different types of batteries. DC power supply function The Q100neo can also function as an adjustable DC power supply. The user can set the voltage in the range from 10 V to 30 V and the current up to 6 A. This allows the device to be used not only for charging, but also for testing electronics or prototype projects. Convenient operation and clear display The charger is equipped with a color display that shows the most important operating parameters for each channel. An intuitive control knob allows you to quickly navigate the menu and change settings. The interface supports several languages, which facilitates configuration and daily operation of the device. Advanced safety systems Built-in safety features protect both the charger and the connected batteries. The safety system includes protection against reverse polarity, overheating, overload, overvoltage, and excessive charging time. This allows the user to use the device without worrying about the safety of the equipment.   ManufacturerSkyRCModelQ100neoDevice typeMultifunctional smart AC/DC chargerInput voltageAC: 100–240 V, DC: 10–30 VCharging current0.1–0.5 A (±0.1 A), 0.6–6.0 A (±10%)Discharge current0.1–2.0 A (±0.2 A)Charging powerAC: 100 W (±10%), DC: 240 W (±10%)Discharge powermax. 15 WBalancing currentmax. 600 mADC power supply modeVoltage: 1–30 V (±0.2 V), Current: 0.1–6 A (±0.1 A)Supported batteriesLiPo, Li-ion, LiFe, LiHV, Pb, NiMH, NiCdPower distribution with AC power supply (100 W)1 port – max. 60 W, 2 ports – 50 W + 50 W, 3 ports – 33 W + 33 W + 33 W, 4 ports – 25 W × 4Dimensions140 × 108 × 43.5 mmWeight491 gDisplayyes

SkyRC S100neo AC/DC Smart Charger The SkyRC S100neo AC/DC Smart Charger is a compact and modern device designed to charge many types of batteries used in RC modeling, electronics, DIY projects, and more. It offers high charging power, AC and DC power support, and precise cell balancing. This allows the user to conveniently control the charging process, and the batteries work more stably and remain in good condition for a longer period of time. Compact design and clear display The housing is made of durable PC-ABS V0 material, ensuring good resistance to damage and high temperatures. The charger has compact dimensions of 105 × 105 × 62 mm and weighs approximately 340 g, so it fits easily on a modeler's workbench or in a carrying bag. The device is equipped with a 1.77-inch TN color display with a resolution of 128 × 160 pixels. The screen shows the most important information about the charging process – voltage, current, and battery status – allowing you to quickly check the operating parameters. High AC and DC charging power The SkyRC S100neo can operate with both mains power and an external DC power supply. In AC mode, the maximum charging power is 100 W, while with DC power it increases to 200 W. This makes the charger suitable for both home and field use, where battery or workshop power supplies are often used. Precise cell balancing The device offers a balancing current of up to 1000 mA, which allows for effective equalization of voltages between battery cells. This ensures that the pack charges more evenly and reduces the risk of uneven cell wear. In practice, this means more stable battery performance and longer battery life. Support for multiple battery types The charger has been designed for universal use. It supports popular LiPo, LiHV, LiFe, and LiIon lithium batteries, as well as NiMH, NiCd, and Pb lead-acid batteries. The user can select the appropriate operating mode, such as charging, balancing, discharging, or storage mode, to suit the specific type of battery. Additional useful features The SkyRC S100neo also offers a digital power supply (CC/CV) function, allowing the device to operate as a regulated power source. In addition, there is a brush motor break-in mode, which is useful in RC modeling. The built-in battery voltage meter makes it easy to quickly check the battery status before use.   ManufacturerSkyRCModelS100neoDisplayYesDisplay typeTN; 1.77 inchesActive area28.03 × 35.04 mmResolution128 × 160 pxNumber of colors262KPower supplyDC: 6–30 V, AC: 100–240 V / 50–60 HzCharging powerAC: 100 W, DC: 200 WDischarge powerup to 20 W (for 6S 4.2V/S pack)Supported batteriesLiPo / LiHV / LiFe / LiIon: 1–6S; NiMH / NiCd: 1–15 cells; Pb: 3S / 6S / 12SCharging current0.1–12.0 ADischarging current0.1–2.0 ABalancing currentup to 1000 mAHousing materialPC-ABS V0Dimensions105 × 105 × 62 mmWeight340 g

SkyRC Type35 2–4S Lithium Battery Charger The SkyRC Type35 2–4S is a modern charger designed for lithium battery users who expect fast, safe, and convenient charging in all conditions. The device supports LiPo, LiHV, and LiFe batteries in 2–4S configurations, offers a maximum charging power of up to 35 W and a current of up to 2 A, and thanks to its USB-C Power Delivery (9–20 V) power supply, it can work virtually anywhere—at home, on the track, in the workshop, or in the field with a power bank. The compact design, measuring only 84 × 48 × 22 mm and weighing approximately 53 g, means that the charger fits easily in your hand or pocket, while intelligent temperature control and precise cell balancing ensure safe and efficient charging. USB-C PD power supply – charging wherever you are With USB-C Power Delivery (PD 3.0) support, the SkyRC Type35 charger gives you tremendous freedom to use power. Simply connect it to a power adapter, power bank, or compatible PD source to immediately start charging 2-4S packs. This solution makes the device ideal for use both on your workshop desk and outdoors during trips or model training sessions. It's a convenient way to charge your batteries virtually anywhere. Charging via the balancer port – greater precision and safety The Type35 charges batteries directly via the balancing port, eliminating the need for additional cables or adapters. Each cell is monitored and controlled individually, keeping the voltage perfectly balanced throughout the pack. The result is higher charging efficiency, more stable battery performance, and longer battery life that you can rely on every time you use it. One charger for multiple battery technologies The SkyRC Type35 is designed to support the most popular lithium battery technologies. You can easily charge LiPo, LiHV, and LiFe packs in configurations from 2S to 4S, giving you great flexibility for a variety of applications. LiPo batteries offer high energy density and low weight, LiHV batteries offer higher voltage and greater capacity for demanding applications, while LiFe batteries are distinguished by their exceptional durability and safety. One device allows you to handle all of these solutions. Fast charging up to 35 W The charger offers a maximum power of 35 W and a charging current of up to 2 A, so that packs can be ready for use in a short time. The intelligent temperature management system ensures stable operation and prevents overheating, maintaining safe conditions even during intensive charging. In practice, this means that the battery can be ready for use before you finish your coffee break. Small size, huge possibilities The Type35 is a device designed with mobility in mind. Its compact design is about four times smaller than a typical smartphone, and weighing only about 53 g, the charger adds virtually no weight to your gear. It fits easily in your pocket, model bag, or backpack, so you can always have it with you—in the workshop, on the racetrack, or in the field. Colorful LED—instant status information The charger is extremely easy to use thanks to a three-color LED that clearly indicates the current operating status. A quick glance is all it takes to see if the charging process is in progress, has been completed, or if the device is waiting for a battery to be connected. It's a quick and intuitive way to check without having to analyze complicated messages. Safe operation in all conditions The SkyRC Type35 is designed for stable operation in a wide range of environmental conditions. The device operates at temperatures from 0°C to 40°C, and its design allows for safe storage even in the range from -10°C to 70°C. This makes the charger suitable for both workshop and field use, offering reliable performance whenever you need power for your batteries. Included: ChargerUser manual   General specifications ManufacturerSkyRCModelType35Product typeLithium battery chargerSupported battery typesLiPo, LiHV, LiFeSupported number of cells2–4SCharging methodCharging via balancer portStatus indicationThree-color LEDDimensions84 × 48 × 22 mmWeightApprox. 53 g   Technical Specifications Input VoltageUSB-C PD3.0, 9–20 VMaximum Charging Power35 WCharging CurrentMax. 2 ALiPo Charging Voltage4.20 V/cellLiHV Charging Voltage4.35 V/cellLiFe Charging Voltage3.65 V / cellBalancing currentmax. 300 mAStandby power consumptionmax. 0.8 W