Accessories

Automatic feeder for xTool P3 The automatic feeder for the xTool P3 engraving machine completely transforms the way you work with a CO2 laser. It allows you to process sheets of much greater length, maintaining precision and repeatability at every stage. The system expands the working area by as much as 111% - up to an impressive 610 × 1300 mm, opening up entirely new possibilities for large projects such as furniture panels, wall decorations or structural elements. Smooth feeding and precise adjustment The feeder uses an intelligent material transport system that automatically moves the sheet as it runs, eliminating the need for manual intervention and the risk of errors. Perfect alignment of successive sections of the design ensures that full precision is maintained, even with extremely long parts. It's a solution that increases productivity and allows you to focus on the creative side of your work. Support for a variety of materials and thicknesses The xTool P3 with automatic feeder allows you to process a wide range of materials - from wood and acrylic, to fiberboard and cork, to felt or EVA foam. The maximum material thickness can be as much as 26 mm for wood, 20 mm for acrylic and fiberboard, 12 mm for cork plastics and felt, or 15 mm for foam. Such versatility makes the system ideal for both art, craft and advertising production. Simple, four-step process Using the feeder is very simple and intuitive. All you have to do is arrange the material, scan its position, prepare the design in the software and start automatic processing. The system will take care of moving the sheet itself, maintaining perfect pattern continuity and cutting sharpness. More efficiency, less downtime With the feeder, you can process larger orders without having to split the design into smaller pieces. This solution is ideal for small production facilities, art studios and product series creators where fluidity and speed are important.   ManufacturerxToolModelP0101000117Working area610 × 1300 mmCompatibilityxTool P3 laser engraving machineMax. material thickness (wood)26 mmMax. material thickness (acrylic)20 mmMax. material thickness (fiberboard)20 mmMax. material thickness (felt/bark)12 mmMax. material thickness (EVA)15 mm

Belt feeder for xTool P2/P2S The belt feeder for the xTool P2 and P2S significantly increases the machine's working area - up to 3000 mm × 500 mm. This allows you to engrave long materials without having to split them and process more parts at one time. This is a solution for those who want to work faster, more accurately and more efficiently. Automatic material feeding The machine automatically plans the engraving path and moves the material without the need for manual feeding. This not only saves time, but also increases precision - forget about positioning errors. Machine a variety of materials - without limits With this feeder, you expand the range of materials that can be processed. In addition to classic plywood, acrylic or MDF (Medium Density Fibreboard), you can also work with soft materials such as cork, felt or EVA foam (Ethylene Vinyl Acetate, foam made from a copolymer of ethylene and vinyl acetate). Regardless of texture or thickness - the feeder ensures stable and smooth movement of the material. Stability that makes a difference The upper and lower pressure rollers are made of non-slip materials. This ensures that both thin and thicker plates are held securely, without the risk of shifting during operation. Thoughtful design Mounting the feeder rails is easy thanks to a snap-in system, and color-coded pressure markings help you quickly select the right pressure for a particular material. In addition, the bottom knob allows you to conveniently adjust the position of the material, and the alignment grid helps evenly align the selected material with respect to the feed direction.   ManufacturerXToolModelP5010199CompatibilityxTool P2 / P2SDimensions687 × 200 × 135 mmWeight4.55 kgMaximum speed160 mm/sMaximum machining area3000 mm × 500 mmMaximum material width624 mmMinimum material width65 mmMaximum material thickness14 mmMaximum length of material1 m (including 30 cm hanging)Processing length0.85 m (including 30 cm hanging)

Creality Falcon AP1 Smoke Absorber Creality Falcon AP1 is an advanced smoke absorber that provides up to 99% air purification efficiency thanks to its innovative 360° airflow and multi-stage filtration system with HEPA and activated carbon filters. High performance, intelligent Wi-Fi control with automatic synchronization, real-time PM2.5 air quality monitoring, efficient filters, and quiet operation make the Falcon AP1 a reliable and comfortable solution for effective smoke and odor removal, designed for safe and peaceful work. Breathe safely, create without limits The Falcon AP1 can automatically select the best settings for the materials being processed. Thanks to the Auto-Tune function, the device always operates at optimal efficiency, which translates into more effective smoke and fume capture and stable working conditions. The high-performance HEPA filter with a large working area (up to 3 m²) effectively captures up to 99.97% of fine particles as small as 0.3 μm, providing a high level of protection against dust and micro-pollutants that are invisible to the naked eye. Intelligent airflow At the heart of the device is an innovative 360° airflow system, supported by a powerful motor. This solution enables fast and precise smoke capture directly at the source, before it has a chance to spread throughout the room. An air speed of up to 20 m/s guarantees instant capture of smoke and fumes. A flow rate of 250 m³/h ensures effective air circulation throughout the entire work area. Meanwhile, an impressive suction power of 1700 Pa enables effective extraction of contaminants exactly where they are generated. Advanced filtration and monitoring The five-stage filtration system is designed to eliminate smoke, fumes, and unpleasant odors as much as possible, capturing even the smallest particles. The built-in PM2.5 digital display allows you to monitor the air quality around your workstation in real time, while the filter life cycle monitoring system analyzes their wear and tear on an ongoing basis. Up-to-date data on the level of harmful particles gives you full awareness of the effectiveness of the purification process and helps you maintain healthy conditions at all times. Convenient remote control The Falcon AP1 is the world's first Wi-Fi-controlled fume extractor that offers full integration and smart features such as: automatic on/off synchronized with Falcon lasers, delayed shutdown that can be adjusted to ensure that all fumes are removed, as well as remote control, air quality monitoring, and filter wear detection. Everything for maximum convenience and control. Maximum odor absorption The ultra-dense 1.4 kg carbon cartridge effectively captures contaminants at the molecular level. This system is designed to eliminate intense odors such as fumes from acrylic or leather processing. The advanced design of the filtration system significantly reduces downtime and operating costs. A standard filter lasts up to 1,000 hours, while a V-Fold carbon filter lasts up to 1,500 hours. This is up to 5 times better than the market average of around 200 hours, making the AP1 an extremely durable and cost-effective solution. Intelligent and quiet operation The device automatically selects the optimal filtration mode depending on whether cutting or engraving is being performed. This solution allows you to maintain high cleaning efficiency without the need for manual intervention. What's more, despite its advanced technology and high cleaning power, the Falcon AP1 is extremely quiet. With a noise level of only 57 dB, the device does not distract or disturb concentration, allowing for comfortable work even in enclosed spaces. Included in the set smoke absorberfilter 1 (factory installed)filter 2 (factory installed)hose clamps x2power cordair duct connectorType-C data cableexhaust pipeuser manual   ManufacturerCrealityModelFalcon AP1Product dimensions460 x 270 x 430 mmWeight10 kgAir inlet channel sizeф65 mmInput voltage110–230 V ~ 50–60 HzOutput voltageDC24VMaximum power150WOperating noise<62dBMaximum air flow250M3/hOperating temperature-20~50°CSafety certificatesCE, ROHS, FCCFilter configurationHigh-efficiency HEPA composite filter, activated carbon filter

Filter for the Creality Falcon YW45W Fume Hood Ensure the smooth operation of the filtration system in your Creality Falcon YW45W fume hood. The set includes five cotton pre-filters measuring 178 × 178 × 8 mm and one high-efficiency filter measuring 178 × 178 × 70 mm. This ensures reliable capture of smoke and other contaminants. Regular replacement of the filter elements helps maintain the fume hood’s efficient and trouble-free operation. Included Pre-filter x5High-performance filter x1   ManufacturerCrealityModel4008060401Product typeAir purifier filterHigh-performance filter dimensions178 × 178 × 70 mmPre-filter dimensions178 × 178 × 8 mmCompatibilityCreality Falcon YW45W air purifier

LaserPecker Air Purifier Smoke Absorber The LaserPecker Air Purifier is an advanced smoke absorber designed to work with laser engravers. With its modern design, robust construction and advanced filters, the device not only effectively purifies the air of smoke and dust, but also makes a stylish addition to any workshop or office. Its precise technical parameters and quiet operation make it an ideal choice for professionals who value quality and efficiency. Efficient filtration system LaserPecker Air Purifier is equipped with an advanced filter system that effectively removes smoke particles, dust and other air pollutants. The filter set provides long-lasting effectiveness, working for 3 to 6 months (depending on the intensity of use). The large surface area allows for precise absorption of pollutants, resulting in cleaner air in the workplace. Quiet and efficient operation Thanks to the advanced design of the fan, the LaserPecker absorber operates at a noise level of 50-67 dB, which allows you to use the device comfortably without disturbing your surroundings. Compact and robust design The LaserPecker Air Purifier is compact yet sturdy, making it easy to set up even in small workspaces. With its modern design and simple interface, the device fits perfectly into the aesthetics of modern workshops. Included LaserPecker smoke absorber x1Filter set x1Power supply x1Cotton pre-filter x2Fan adapter x1Air inlet duct (1.5 m) x1Air outlet duct (1.5 m) x1User manual x1   ManufacturerLaserPeckerDimensions247 x 268 x 265 mmDimensions of filter set190 x 198 x 165 mmAir duct sizeDiameter 60 mm, length 1.5 mWeight6.2 kgWeight of filter set1,5 kgService life of filters3-6 monthsFan adapter diameter52 mmDiameter of air inlet and outlet73 mmMaximum noise level50-67 dBPower cord length2 m

LaserPecker Air Purifier smoke canister filter The LaserPecker Air Purifier smoke canister filter effectively removes contaminants such as smoke, dust and fine particles from the air. The large filter area ensures long-lasting and efficient operation of the device. The filter has a lifespan of 3 to 6 months, depending on the intensity of use, making it ideal for professional applications where clean air is a priority.   ManufacturerLaserPeckerManufacturer codeLP-APFCompatibilityLaserPecker Air Purifier

LaserPecker aluminum business card set (100 pcs). This set contains 100 aluminum sheets on which you can engrave any lettering and designs you want. This is a great way to create personalized gift cards, business cards, nameplates, door plaques and more. The engraving color will be white or close to white. A durable aluminum alloy is used to make the plates, which is extremely lightweight, yet durable and resistant to bending, damage and rust. Note: you will get the best results with LaserPecker LP2, LP3 or LP4 engraving machine.   ManufacturerLaserPeckerModelLP100BCMaterialAluminum alloyDimensions85 x 55 x 0.1 mmNumber of pieces in the set100

LaserPecker rotary platform for LX2 The LaserPecker rotary platform for LX2 is designed for projects that go beyond standard dimensions. It allows for comfortable processing of exceptionally thick materials and large-diameter objects, opening the way to more diverse and profitable personalized projects. With it, you can confidently take on jobs that were previously out of reach. Impressive range of work with thick materials The use of the platform significantly increases the maximum working height – from 45 mm to 150 mm. This is a huge difference that allows you to engrave and mark very thick elements while maintaining the stability and precision of the laser. The Riser Base makes the LaserPecker LX2 an even more versatile tool, ready for ambitious projects. Engraving large diameter cylinders The rotary platform works perfectly with the rotary attachment, allowing you to process cylindrical objects with a diameter of up to 130 mm. This combination allows for convenient and accurate engraving of bottles, tubes, cups, or other objects with a large circumference, without the limitations typical of standard solutions. Full control thanks to adjustable height The device offers four precisely designed height adjustment levels, ensuring a perfect fit for the object being processed. The adjustment range includes level 1 from 16.5 to 76.5 mm, level 2 from 41 to 101 mm, level 3 from 65.5 to 125.5 mm, and level 4 from 90 to 150 mm. This flexibility allows you to quickly and conveniently set the appropriate height while maintaining full control over the engraving process. Dedicated solution for LaserPecker LX2 The rotary platform has been designed for the LaserPecker LX2 model, ensuring full compatibility and seamless integration with the device. It is an indispensable accessory for users who want to maximize the potential of their engraver and expand the range of projects they can carry out without investing in new equipment.   ManufacturerLaserPeckerModelLX2-RBRCompatibilityLaserPecker LX2Maximum working height150 mmMinimum working height16.5 mmWorking space increase rangefrom 45 mm to 150 mmHeight adjustment4 levels (Level 1: 16.5–76.5 mm, Level 2: 41–101 mm, Level 3: 65.5–125.5 mm, Level 4: 90–150 mm)Maximum diameter of cylindrical objectsup to 130 mm

LaserPecker smoke extractor for LX2 The LaserPecker smoke extractor for LX2 has been designed for maximum comfort during laser engraving and cutting. It effectively eliminates smoke, odors, and microscopic contaminants, creating a safe and friendly environment even during long sessions. This solution significantly improves the quality of work, protecting your health and allowing you to fully focus on the precision of your project. Three-stage filtration An advanced three-stage filtration system with a HEPA filter and activated carbon is responsible for its exceptional effectiveness. The absorber removes up to 99.97% of fine particles up to 0.3 microns in size, effectively capturing dust and volatile contaminants generated during laser operation. This keeps the air in your workshop noticeably cleaner and fresher. Higher performance and longer service life The large 420 × 250 × 410 mm filter provides more intensive cleaning and a longer service life without the need for frequent replacement. The increased capacity translates into stable performance even with demanding materials, which will be appreciated by both professionals and hobbyists. Quiet operation for better concentration The LaserPecker smoke absorber for the LX2 operates extremely discreetly, keeping noise levels below 61 dB. This means it does not distract or disrupt your work, allowing for comfortable use in the office, workshop, or home studio. Smart control and compatibility Built-in smart features notify you when the filter needs to be replaced and allow you to set a timer for automatic shutdown, increasing convenience and safety. The device is designed exclusively for use with the LaserPecker LX2 engraver, ensuring a perfect fit and seamless integration with the entire system.   ManufacturerLaserPeckerModelLX2-SPCompatibilityLaserPecker LX2Filtration systemthree-stageFilter typeHEPA filter + activated carbon filterFiltration efficiency99.97%Size of captured particlesup to 0.3 micronsFilter dimensions420 × 250 × 410 mmNoise level during operationbelow 61 dBAdditional featurestimer support

LaserPecker Versatile Electric Roller Get more options when using your LP2 laser engraver. The LaserPecker Versatile Electric Roller allows you to increase the working area to 10 x 200 cm, so you can easily decorate even larger objects, including boards and countertops. Using it, you will also be able to engrave cylindrical objects, such as rollers and bottles, as well as uneven or curved surfaces. The product supports several modes, including Cylindrical, Trolly and Slab. Included RollerMagnetic slider x2C-shaped bracketSilicone bandsUSB cableUser manual   ManufacturerLaserPeckerModelLPVEMax. engraving area10 x 200 cmInput current5 V / 2 AMaterialAnodized aluminumDimensions18.6 x 12.7 x 3.7 cmWeight1.6 kg

Mobile workstation for xTool P3 The xTool mobile workstation is a sturdy stand designed specifically for P3 laser engravers. Thanks to its steel construction with a load capacity of up to about 200 kg, it provides full stability during operation and minimizes vibrations that could affect the precision of cutting or engraving. It is also equipped with sturdy casters that make it easy to move. It's ideal for professional workshops! Stability and lifting capacity of up to 200 kg Construction made of thick steel guarantees maximum rigidity and resistance to vibration. The table supports a weight of up to about 200 kg, so it can easily carry the xTool P3 laser engraver and its accessories. The stability of the workstation translates into repeatability and precision during engraving. Mobility and full motion control Four sturdy casters allow the table to move freely in any direction, do not scratch the floor and guarantee smooth, quiet movement. This makes it easy for even one person to move the laser engraving machine, adjusting the layout of the workstation to suit current needs. The 360° rotation function makes it easy to maneuver, and the locking mechanism allows you to instantly immobilize the workstation in the desired location. Expandable and customizable The table has been equipped with mounting holes for the installation of an additional shelf, which allows you to create a workstation perfectly tailored to your individual needs. It's a solution that helps you stay organized, provides quick access to the most frequently used tools and makes maximum use of the available space.   ManufacturerxToolModelP0102000110MaterialSteelLoad capacityUp to 200 kgCastor lockYesExpandableYes, mounting holes for shelf

The xTool Slide Extension moving base for the xTool F1 The xTool Slide Extension opens up a new dimension of creation for you with the xTool F1 laser. More than an accessory, it's your new concept tool that surprises you with its simplicity: just plug it in and you're good to go. Its impressive size is like an invitation to a world where any project, even the most demanding, becomes real, giving you the freedom to create without the limitations of space. When precision is a priority The xTool Slide Extension is synonymous with precision, where every millimeter matters. The calibrated rulers work perfectly with xTool Creative Space software, giving you full control over every detail of your project. And with the focusing system familiar from xTool F1, every movement is predictable and precise, making perfect finishing the standard rather than the exception. Perfection in every detail The xTool Slide Extension's state-of-the-art cutting panel is a guarantee that your creations will be finished with incredible attention to detail. Perfectly designed airflow ensures that every cut is clean and smooth. With your convenience in mind, the base is equipped with clamps and dual scaling, eliminating the need for recalculations. And the intuitive, one-button operation promises that comfort will accompany you from the beginning to the end of the creative process. Included Movable standMovable rulerScrewdriverMaterial clamp 1Material clamp 2USB cableUser manual   ManufacturerxToolModelP5010253CompatibilityxTool F1

xTool 5W Infrared Module Expand the capabilities of your xTool P3 engraver to include precise engraving of metal and plastics—without the need for spray or any prior preparation. The xTool Infrared Module offers 5 W optical power, a wavelength of 1064 nm, and a peak power of up to 65 kW, allowing you to create permanent markings and detailed designs even on challenging materials. A laser spot size of approximately 0.03 mm ensures exceptional precision, while the 650 × 426 mm working area and a processing speed of up to 1000 mm/s enable efficient completion of both small and larger projects. Precise 1064 nm Beam for Demanding Tasks The 1064 nm infrared laser enables precise engraving on materials that pose a challenge for conventional diode and CO₂ lasers. The module is ideal for working with materials such as gold, silver, copper, stainless steel, and aluminum, enabling the creation of durable, high-contrast markings. It can be used both for personalizing jewelry—such as rings, pendants, and bracelets—and for applying serial numbers or barcodes to components. A laser spot size of approximately 0.03 mm allows for even more precise reproduction of fine design elements, thin lines, and text, which is particularly useful when creating complex engravings. A pulse width of 4 ns and a peak power of up to 65 kW further support precise processing, making the module ideal for both personalizing small items and creating detailed markings. More Options for Processing Plastics The IR laser is also well-suited for engraving plastics, such as acrylic. It allows for clean markings without burn marks, making it suitable for both decorative projects and the personalization of everyday items. Full integration with the xTool P3 The module is designed to work with the xTool P3 system and is powered directly by the engraver, which reduces the number of additional cables and simplifies installation. Integrated air cooling helps maintain proper operating conditions—just be sure not to block the ventilation openings. For optimal results, ensure proper focus adjustment at a focal length of 49 mm. The recommended operating temperature range is 0°C to 35°C. Included in the set 5 W infrared laser moduleConnecting rodFocusing blockCalibration paperLubricantAllen wrenchScrewsUser manual   ManufacturerxToolModelP0102000211Optical power5 WPeak powerUp to 65 kWWavelength1064 nmPulse width4 nsLaser spot size0.03 mmMaximum speedUp to 1000 mm/sWorking area650 × 426 mmCoolingAir-cooledRecommended operating temperature0°C to 35°CCompatibilityxTool P3Compatible materialsMetal (e.g., gold, silver, copper, stainless steel, aluminum), synthetic materials (e.g., plastic)

xTool Desktop Fume Extractor The xTool Desktop Fume Extractor is a device designed to create a safe and comfortable working environment during laser processing. Thanks to its integration with the xTool F1 system, it can automatically start up when work begins and remain active for another 10 seconds after it ends, allowing for more effective air purification in the work area. Automatic synchronization with xTool F1 The device is designed to work seamlessly with the xTool F1. In synchronization mode, simply connect the cable for the air purifier to operate in tandem with the laser’s working process. This allows it to start and stop automatically without manual intervention, ensuring smooth operation and greater user convenience. Smart operating time control The fume extractor allows you to freely set the operating time in the xTool Creative Space software, so you can tailor its operation to the type of material being processed and your current needs. This allows for precise adjustment of filtration intensity, resulting in more effective purification of the workspace. High-efficiency multi-stage filtration system The filtration system consists of a pre-filter, an H13 True HEPA filter, and an activated carbon layer. The pre-filter captures larger particles up to 25 μm in size, the HEPA filter captures up to 99.97% of particles ranging from 0.3 μm to 5 μm, and the activated carbon layer neutralizes harmful gases and unpleasant odors. This combination ensures effective air purification while you work. Effective smoke reduction and user comfort The unit’s enclosed design is engineered to minimize the risk of smoke escaping into the surrounding area. The extractor effectively reduces PM2.5 and TVOC levels, helping to maintain a cleaner and more comfortable work environment. Additionally, users have access to 3 speed settings, allowing them to adjust the intensity of operation to suit the conditions and the material being worked on. Practical features and replaceable filters The set includes an additional ventilation tube and two spare pre-filters, which enhance user convenience and extend operating time without the need to purchase additional parts. The filter system is replaceable, and the manufacturer recommends replacing the filters after three pre-filters have been used, which helps maintain high filtration efficiency for a longer period. Kit contents xTool desktop smoke extractor Filter set Air tube Tube adapter Power cord and power adapter USB Type-C cable Pre-filter User manual ManufacturerxTool ModelDesktop Air Purifier Dimensions285 × 190 × 296 mm Weight4.6 kg Input voltage24 V / 2.5 A Connection typeUSB Type-C (Mini USB) Operating modes3 speed levels Filtration systemPre-filter, H13 True HEPA, activated carbon Filtration efficiencyUp to 99.97% of particles 0.3–5 μm CompatibilityWorks with xTool F1 lasers and similar devices

xTool footswitch for F1 series The xTool footswitch is a practical addition for F1 series users, which significantly improves the comfort of work. It allows you to conveniently control the device and effectively improves your work. Made of sturdy materials with an anti-slip surface, it provides durability and convenience of use. The long cable (250 cm) gives a lot of freedom of positioning, and the compact dimensions (177 × 109 × 81 mm) make the device does not take up much space. The product is fully compatible with xTool's F1 series engravers.   ManufacturerXToolModelP5010340Dimensions177 × 109 × 81 mmWeight330 gCable length250 cmCompatibilityXTool F1

XTOOL RA3 Lite rotary attachment The xTool RA3 Lite rotary attachment allows for precise engraving of cylindrical and three-dimensional objects. This tool significantly expands the capabilities of xTool laser plotters, allowing you to personalize items such as mugs, bottles, vases, rings, and decorations with non-standard shapes. With support for four operating modes—clamp, roller, sphere, and ring—the device is ideal for both creating individual, unique projects and for mass production. 360° engraving and full control over detail 360° LiDAR Mapping™ technology enables the generation of a three-dimensional model of the object before processing begins, ensuring flawless alignment of the graphics. The system allows for full rotational engraving on surfaces with complex, irregular geometries (e.g., vases or decorative vessels). Additionally, the built-in camera automatically recognizes the rotational configuration and synchronizes the settings, minimizing the risk of errors and selecting the wrong operating mode. Instant mode change with MagSwap™ The MagSwap™ design enables an instant, tool-free change of the device’s operating mode. The process of mounting the device, adjusting the clamps, and switching modules takes just a few seconds, reducing setup time for subsequent operations. This solution ensures smooth execution of a wide variety of engraving projects, eliminating technical downtime and additional maintenance procedures. Complete freedom of operation when working on larger projects The attachment is designed for working with larger objects and for mass production. The new T-type jaw design ensures a secure grip and stability during engraving, while the increased clamping diameter allows for working with a wider range of objects. The precise 26° angle adjustment feature facilitates the engraving of internal rings and conical elements, reducing project setup time and increasing work efficiency. Smooth execution of mass-production projects without downtime The RA3 Lite allows you to complete more projects in less time by supporting batch processing modes using rollers or a holder. This enables you to prepare subsequent items simultaneously while engraving is in progress, significantly speeding up the fulfillment of personalized orders. A high operating speed of up to 1200 mm/s allows you to increase productivity without sacrificing precision. Full integration with the xTool ecosystem The RA3 Lite model is designed to work with xTool M2 devices and offers full support for engraving cylinders, spheres, and rings. It also enables full-wrap engraving and operation in selected rotational modes, while maintaining a compact design and ease of use. Compared to the full RA3 version, the Lite model does not support automatic rotary mode recognition or batch processing, remaining a solution focused on basic rotary applications. Kit contents Jaw holder Power supply module Main base plate Support module Pins / supports Laser shield Horizontal laser emission holder Positioning plate Device connection cable Measuring tape User manual ManufacturerxTool ModelRA3 Lite Dimensions324 × 187 × 148 mm Weight2.26 kg Maximum operating speed1200 mm/s Supported technologies360° LiDAR Mapping™, MagSwap™ CompatibilityxTool M2 Operating modesChuck Rotary, Roller Rotary, Sphere Rotary, Ring Rotary Features Full-wrap engraving on vasesYes 3D modeling previewYes Automatic rotary mode detectionNo Batch processingNo Inner ring engravingNo Engraving diameter range Rotary chuck0–100 mm Rotary roller3–198 mm Sphere25–100 mm Ring11–70 mm

xTool RA3 rotary attachment The xTool RA3 is a rotary attachment designed for xTool laser engraving machines. It allows precise engraving on cylindrical, spherical and irregular objects, as well as working in production batches. The new handle guarantees a more stable hold on objects up to 130 mm in diameter, and the 3D preview option allows you to perfectly refine any design and avoid mistakes. Engraving on any surface The xTool RA3 opens up completely new possibilities for personalization. It allows you to engrave on a wide variety of objects - from glass glasses and vases, to metal cups, to balls, rings or candlesticks. It allows you to work with cylinders, spheres and objects with unusual forms, maintaining full rotational accuracy and uniform engraving depth. MagSwap™ - changing configurations in seconds The RA3 uses the revolutionary MagSwap™ mounting system, which allows instant switching between different modes of operation. Mounting and changing the mounts are done without tools, allowing you to move seamlessly from one project to another. This design reduces setup time and increases productivity - especially when completing multiple jobs in a short period of time. 3D Viewing with 360° LiDAR Mapping™ The 360° LiDAR Mapping™ system automatically scans the object and creates an accurate 3D model of it, allowing you to see a full preview of the project even before you start work. This solution helps refine every detail and minimizes the risk of mistakes. Efficiency in serial engraving The RA3 attachment allows you to engrave multiple objects in a series. This feature noticeably increases productivity when working with serial orders. This makes the device ideal for professional workshops. Stable clamping of large and irregular objects The new T-type clamping system guarantees a secure, non-slip grip and stable holding of workpieces with a diameter of up to 130 mm. This makes it possible to safely engrave even large items such as bottles, vases or thermal cups without the risk of shifting the material. The RA3 also handles irregularly shaped objects without any problems, holding them in position throughout the work process.   ManufacturerxToolNameRA3ModelP5010454Mounting systemMagSwap™ (without tools)Handle typeNon-slip T-handleMax. workpiece diameter130 mmSupported shapesCylinders, irregular objects, spheres, rings, vasesSerial operation modeYesCompatibilityxTool P3

xTool SafetyPro™ AP2 Max Smoke Absorber The xTool SafetyPro™ AP2 Max is an industrial smoke absorber designed for users of professional laser engravers and cutters. The device ensures maximum air purity by eliminating smoke, odors and toxic substances right at the source. With a huge capacity of 700 m³/h and an advanced seven-layer filtration system, the product creates a safe and comfortable working environment even when used for long hours. Seven layers of complete protection The SafetyPro™ AP2 Max uses a seven-layer filtration system that removes both large particles and microscopic fines and harmful gases from the air. The SuperCyclone filter captures 99% of particles over 5 μm in diameter and protects subsequent layers from clogging. Pre-filter and medium efficiency filters eliminate dust, fibers and up to 95% of PM2.5 fine dust, while two carbon layers - activated carbon and ultra-dense carbon mesh - neutralize volatile organic compounds and 99.99% of odors. A formaldehyde filter breaks down toxic HCHO into water and carbon dioxide, reducing its concentration. The final barrier is the HEPA filter, which traps 99.97% of particles, allergens and viruses as small as 0.3 micrometers. SuperCyclone - longer filter life, lower costs The innovative SuperCyclone system makes the entire filtration process more efficient and cost-effective. It is reusable and its design prevents clogging of successive layers. This extends the life of the pre-filter by up to ten times, which means less frequent replacement, less material consumption and lower operating costs. Quiet, efficient operation and precise control The 900-watt motor generates a stable airflow with a noise level of only about 65 dB, which helps maintain acoustic comfort in the workshop or workshop. In addition, the airflow regulation from 1 to 100% allows you to perfectly adjust the operation of the device to the current conditions and the type of material being processed.   ManufacturerxToolNameSafetyPro™ AP2 MaxModelP0101000132Airflow capacity700 m³/hFiltration system7-layerNumber of cyclones72Airflow adjustment range1-100% (precise control)Noise level65 dBPowerUp to 900 WDimensions662 x 452 x 845 mmCompatibilityxTool P3, MetalFab and all other xTool laser engravers

xTool SafetyPro™ AP2 Smoke Absorber The xTool SafetyPro™ AP2 is a powerful smoke absorber that provides optimal air quality when working with laser engravers. With an advanced filtration system, it effectively removes harmful particles and odors, creating a safe and comfortable working environment. Whether you're using the xTool Laserbox, xTool M1, or xTool D1/D1 Pro with an enclosure, the AP2 works perfectly with any of these devices to guarantee the best results. Powerful, three-stage filtration The xTool SafetyPro™ AP2 is equipped with an advanced filtration system consisting of three layers. The pre-filter captures larger particulates, the middle filter removes up to 99.97% of microscopic particles as small as 0.03 μm, and the main filter effectively absorbs harmful gases and odors. In this way, the air remains clean and the risk of inhaling harmful substances is minimized. Quiet operation for complete focus With low noise emissions, the xTool SafetyPro™ AP2 allows you to work in a quiet environment without unnecessary distractions. The unit's quiet operation promotes concentration and keeps you comfortable, no matter how long the engraving process takes. Sealed design and easy operation The AP2's airtight housing prevents contaminants from escaping to the outside, ensuring that fresh air is kept in the room. In addition, replacing the filter is quick and easy - simply remove the cover, remove the used filter and insert a new filter set. This solution minimizes downtime and ensures that the device is always ready to work. Mobility and compatibility The xTool SafetyPro™ AP2 is compact and easy to carry, so you can easily place it where you need it most. The device is fully compatible with xTool's laser engravers, such as the Laserbox, M1 and D1/D1 Pro with case accessory. This makes the AP2 a versatile and practical addition to any workshop. Create in a healthy environment With the xTool SafetyPro™ AP2 canister, you can work without worrying about air quality. The device eliminates smoke and unpleasant odors, which significantly increases the comfort of your work and takes care of your health. No matter what type of material you are working with, the AP2 allows you to enjoy clean air and better efficiency. Included P5010391 x1Filter set x1Pipe clamp x3Smoke exhaust pipe x1Screw set x1Power cable x1Pipe connector x2Wall connector x1Screwdrivers (Phillips and flathead) x2User manual x1   ManufacturerxToolModelP5010391Adapted machineP2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1Product size290*491*542mmProduct weight20.7 kgControl modeTouch button, four adjustable gearsPre-filtration systemCyclone separationRated power220WFilter layersSuperCyclone filter, pre-filter, medium efficiency filter, activated carbon layer, extra dense carbon mesh, high efficiency filterNoise55dB