Straps, mounts, and holders

Sunnylife universal bike mount for sports cameras Capture your next bike trip from an unusual perspective. The Sunnylife universal mount is compatible with most sports cameras (for example, GoPro, DJI Action), and thanks to the included three silicone rings of different diameters, it fits many handlebar models. The accessory is made of durable materials and comes with a special non-slip pad, which guarantees greater stability and protects against scratches. You can also adjust the tilt of the camera mounted on it (up to 180°), as well as rotate it 360°. The mount also has places for Air Tag and is very easy to install. Wide compatibility The mount is compatible with sports cameras such as GoPro, Insta360 Ace, Insta360 GO, Insta360 ONE R, Insta360 X4/X5 or DJI Action, for example. You can also use additional adapters (not included) to mount a DJI Pocket series device, Insta360 ONE X or even a smartphone. In the package you will also find 3 interchangeable rings, so that the product fits bicycle handlebars of different diameters (29-35 mm, 24-30 mm, 19-24 mm). Included Bike holderSilicone ring 29-35 mmSilicone ring 24-30 mmSilicone ring 19-24 mmScrew   ManufacturerSunnylifeModelZJ758MaterialPlastic + silicone + metalWeight139 gCompatibilitySports cameras such as DJI Action, GoPro, Insta360 ONE R, Insta360 Ace, Insta360 X4/X5, etc.

Cellphone Mount Sunnylife for Osmo Pocket 3 If you're an Osmo Pocket 3 owner and want to enjoy an even larger screen during your filming adventures, the Sunnylife phone holder is the solution you're looking for. It allows you to mount your phone in front of the device, opening up completely new possibilities for you. Perfect Fit No need to worry whether the holder will fit your Osmo Pocket 3 - it is specifically designed with this camera in mind. This ensures that your devices work perfectly together. Moreover, the Osmo Pocket 3 with the mounted holder can stably stand on various surfaces, making video recording even more versatile. Whether you're working at a desk or out in the field, the holder will be a reliable companion! Convenient and Practical The holder is carefully designed not to interfere with one-handed operation. This gives you full control over your camera and allows you to freely capture every moment. Want to use your Osmo Pocket 3 with a tripod? No problem - the holder is equipped with a standard 1/4 inch screw hole, meaning you can easily mount it on a tripod or other similar accessory. Ready for Action Know that your phone is safe. The Sunnylife phone holder has a soft finish that protects against scratches and damages that might occur during use. Moreover, its installation is hassle-free! Start recording amazing videos using the Sunnylife phone holder. ManufacturerSunnylife ModelOP3-ZJ747 CompatibilityOsmo Pocket 3

Cold shoe mount for Insta360 X4 / X3 / X2 cameras. Mount designed specifically for Insta360 X4, X3, ONE X2 cameras. It allows you to expand your device with accessories such as a microphone or flash, for example, and is also compatible with selfie sticks. This gives you even more recording options! The product weighs only about 7 g, and is made of durable aluminum alloy.   ManufacturerInsta360NameX3/X2 Cold ShoeModelPT-21MaterialAluminum alloyWeight7 gCompatibilityInsta360 X4, X3, ONE X2

Dog chest strap PULUZ for action cameras (GoPro, Insta360, DJI Action etc.) See the world from your pet's perspective. The Puluz PU156 mount allows you to attach your chosen action camera to your dog's chest or back - the first option is perfect for capturing playtime with a ball, while the second is ideal for activities like running or fetching. The accessory is designed to provide maximum comfort for your pet and is easy to clean - you don't have to worry if your four-legged friend gets it dirty! Mounting the camera on the product is exceptionally simple and quick, and the additional strap ensures the safety of your device. The mount is suitable for small, large, and medium-sized dogs (weighing from 7 kg to 54 kg). In the box Mount J-Hook Movable Base Long Screws x2 Brand Puluz Model PU156 Compatibility Action cameras, such as GoPro, Insta360, DJI Action Intended for Small, large, and medium-sized dogs (weighing from 7 kg to 54 kg)

Freewell Genius Rig Mount for iPhone 17 Pro The Freewell Genius Rig for iPhone 17 Pro is a professional camera rig designed for mobile content creators who want to expand the capabilities of their smartphone. The model features the SnapClamp quick-mount system, which allows you to attach your phone without tools, a magnetic slot for Freewell filters, and a 17 mm thread for mounting compatible lenses. The design offers 11 1/4" mounting threads, 4 cold shoes for attaching additional accessories, and modular TriGenius and MonoGenius grips with a Bluetooth remote control. Thanks to its lightweight aluminum construction, 360° rotating mounts, and versatility as a tripod, monopod, or selfie stick, the Genius Rig is ideal for vlogging, live streaming, recording content for YouTube and TikTok, and professional mobile productions. Quick setup and extensive expansion options The SnapClamp mechanism allows for instant and secure attachment of the iPhone 17 Pro, so setting up your rig takes just a moment. The sturdy construction, made of high-quality aluminum alloy and silicone components, ensures durability and a comfortable grip while filming. The cage is equipped with 11 1/4" mounting threads and 4 cold shoes, allowing you to simultaneously mount a microphone, LED light, viewfinder, or other accessories. Additionally, the magnetic slot for Freewell filters and the 17 mm thread allow you to use compatible filters and lenses, such as macro, telephoto, or anamorphic lenses, making it easy to adapt the setup to specific types of footage. Modular mounts for greater shooting flexibility The kit comes with two versatile mounts that can be used depending on your shooting style. The TriGenius serves as both an ergonomic grip and a compact tripod, and its 360° rotating joint makes it easy to change the frame without having to reattach your phone. MonoGenius can function as a mount, a monopod, or an extendable selfie stick up to 25 cm long, making it ideal for both recording on the go and taking group photos. The set includes a Bluetooth remote control powered by a replaceable CR1632 battery, which allows you to start and stop recording remotely from a distance of up to 10 meters, increasing comfort whether you’re working alone or during studio shoots. Lightweight design and well-thought-out dimensions Despite its extensive functionality, the Freewell Genius Rig remains comfortable for everyday use and easy to transport. The cage itself weighs 133 g, while the TriGenius mount weighs 239 g and the MonoGenius weighs 201 g, allowing you to choose the configuration that best suits your current needs. The width of the entire kit with the mounts attached is 321.3 mm, the height of the mounts is 136.3 mm, and the width of the cage itself is 183 mm. This keeps the system compact while offering stability and ease of use when recording footage in any conditions. Included Freewell Genius Rig cage for iPhone 17 ProTriGenius mountMonoGenius mountBluetooth remote control   ManufacturerFreewellModelGenius RigCompatibilityiPhone 17 ProMaterialaluminum alloy + siliconePhone mounting systemSnapClamp (tool-free)Filter MountFreewell magnetic slotLens Mount17 mm threadMount Rotation360°Number of Mounting Threads11 × 1/4"Number of Cold Shoes4Remote controlBluetoothBluetooth remote rangeup to 10 mRemote batteryCR1632 (replaceable)Extendable monopod lengthup to 25 cmCage weight133 gTriGenius mount weight239 gMonoGenius mount weight201 gWidth of the set with mounts321.3 mmHeight of the mounts136.3 mmCage width183 mm

Freewell Genius Rig Mount for iPhone 17 Pro Max The Freewell Genius Rig for iPhone 17 Pro Max is a professional camera rig designed for mobile content creators who want to expand the capabilities of their smartphone. The model features the SnapClamp quick-mount system, which allows you to attach your phone without tools, a magnetic slot for Freewell filters, and a 17 mm thread for mounting compatible lenses. The design offers 11 1/4" mounting threads, 4 cold shoes for attaching additional accessories, and modular TriGenius and MonoGenius grips with a Bluetooth remote control. Thanks to its lightweight aluminum construction, 360° rotating mounts, and versatility as a tripod, monopod, or selfie stick, the Genius Rig is ideal for vlogging, live streaming, recording content for YouTube and TikTok, and professional mobile productions. Quick setup and extensive expansion options The SnapClamp mechanism allows for instant and secure attachment of the iPhone 17 Pro Max, so setting up your rig takes just a moment. The sturdy construction, made of high-quality aluminum alloy and silicone components, ensures durability and a comfortable grip while filming. The cage is equipped with 11 1/4" mounting threads and 4 cold shoes, allowing you to simultaneously mount a microphone, LED light, viewfinder, or other accessories. Additionally, the magnetic slot for Freewell filters and the 17 mm thread allow you to use compatible filters and lenses, such as macro, telephoto, or anamorphic lenses, making it easy to adapt the setup to specific types of shoots. Modular mounts for greater shooting flexibility The kit comes with two versatile mounts that can be used depending on your shooting style. The TriGenius serves as both an ergonomic grip and a compact tripod, and its 360° rotating joint makes it easy to change the frame without having to reattach your phone. MonoGenius can function as a mount, a monopod, or an extendable selfie stick up to 25 cm long, making it ideal for both recording on the go and taking group photos. The set includes a Bluetooth remote control powered by a replaceable CR1632 battery, which allows you to start and stop recording remotely from a distance of up to 10 meters, increasing comfort whether you’re working alone or in a studio setting. Lightweight design and well-thought-out dimensions Despite its extensive functionality, the Freewell Genius Rig remains comfortable for everyday use and easy to transport. The cage itself weighs 133 g, while the TriGenius mount weighs 239 g and the MonoGenius weighs 201 g, allowing you to choose the configuration that best suits your current needs. The width of the entire kit with the mounts attached is 321.3 mm, the height of the mounts is 136.3 mm, and the width of the cage itself is 183 mm. This keeps the system compact while offering stability and ease of use when recording footage in any conditions. Included Freewell Genius Rig cage for iPhone 17 Pro MaxTriGenius HandleMonoGenius HandleBluetooth Remote Control   ManufacturerFreewellModelGenius RigCompatibilityiPhone 17 Pro MaxMaterialaluminum alloy + siliconePhone Mounting SystemSnapClamp (tool-free)Filter MountFreewell magnetic slotLens Mount17 mm threadHandle Rotation360°Number of Mounting Threads11 × 1/4"Number of Cold Shoes4Remote controlBluetoothBluetooth remote rangeup to 10 mRemote batteryCR1632 (replaceable)Extendable monopod lengthup to 25 cmCage weight133 gTriGenius mount weight239 gMonoGenius mount weight201 gWidth of the set with mounts321.3 mmHeight of the mounts136.3 mmCage width183 mm

GODOX AD-B2 S Dual Head for AD200 Flashes The GODOX AD-B2 S Dual Head allows you to combine two GODOX AD200 flashes into a single, powerful 400 W setup. This allows you to achieve greater flash power without having to use two separately positioned light sources, making it easier to light larger photo sets and work with complex light modifiers. An additional advantage is the 2 × 20 W LED modeling light, which allows you to conveniently assess the lighting effect before taking the photo. Greater convenience during every session The 2 × 20 W LED modeling light makes it easier to set up the lighting and fine-tune the composition, making session preparation run more smoothly. There’s no need to use two separate studio lights to enjoy the benefits of efficient modeling light. It’s a practical solution that streamlines your work both in the studio and when shooting outdoors. Stable Mounting and Flexibility in Positioning The head is equipped with a lighting stand mount featuring a 5/8" spigot and a tilt lock. This design allows you to conveniently mount the setup and precisely adjust the light direction, ensuring stability and comfort during various types of photo sessions.   ManufacturerGODOXModelAD-B2CompatibilityGODOX AD200 flashPower when two flashes are combined400 WsLED modeling light2 × 20 WTripod mount5/8" spigot socket

Bowens Adapter for the GODOX BW-AD400Pro Flash This adapter allows you to equip the GODOX AD400Pro flash with the popular Bowens mount, giving you access to a wide variety of light modifiers—both from GODOX and many other manufacturers that use this standard. This allows you to freely adapt softboxes, reflectors, and other accessories to the nature of your shoot and more easily achieve your desired lighting effect. This is a practical solution for photographers and videographers who want to expand the capabilities of their kit without having to replace their existing light modifiers. The adapter is also compatible with the GODOX AD300Pro flash when used with the Godox AD-AB adapter, providing even greater flexibility when working in the studio and on location.   ManufacturerGODOXModelBW-AD400ProMount TypeBowensCompatibilityGODOX AD400ProAdditional CompatibilityGODOX AD300Pro (requires the Godox AD-AB adapter)Intended UseAllows the use of Bowens-mount light modifiers, including products from GODOX and other manufacturers

GODOX LSA-17 Hook The Godox LSA-17 is a versatile U-shaped bracket designed for use in photography, videography, and studio work. The integrated Allen screw allows the bracket to be attached to various models of Super Clamp-type clamps. The accessory can be mounted on a tripod or stand and used, among other things, to organize cables, ensuring they don’t get in the way while working and making it easier to keep your workspace tidy. More Applications The design of the Godox LSA-17 allows it to be used for more than just cable management. With the addition of a hook, the clamps can support a tube or pole, creating a practical solution for hanging a roll of paper backdrop. This is particularly useful in photography and film studios, where the ability to conveniently arrange equipment makes it easier to set up the scene for subsequent shots. A Useful Studio Accessory Its simple design and versatility make the Godox LSA-17 a practical addition to the gear of any photographer, filmmaker, or studio. It helps organize cables and, when configured properly, also secures the components needed to hang a backdrop, allowing for better use of available tripods and mounting accessories.   ManufacturerGodoxModelLSA-17Product Typemounting bracketDesignU-shapedMountingintegrated Allen screwCompatibilitySuper Clamp-type clampsApplicationorganizing and routing cables, supporting tubes or rodsIntended Usephotography, video, studio, stage

Sunnylife palm mount for DJI OSMO Pocket 3 camera Ensure your comfort during hours of recording. The Sunnylife palm mount makes it easy to use the DJI OSMO Pocket 3 camera. The cold shoe adapter allows you to mount additional accessories. It is also possible to adjust the length of the wristband, which further enhances the comfort of use. The product is also compatible with Sunnylife BHT746 and Z754 housings. Comfort of use Sunnylife's hand grip improves the comfort of the DJI OSMO Pocket 3 camera, providing a relaxed hand during breaks in recording. The product is made of matte PU leather with a soft texture, which guarantees pleasure to the touch and high durability. Adjustable The product is equipped with an adjustable Velcro strap, which allows you to adjust the length to suit your individual needs. As a result, you will always enjoy maximum comfort during creative work. Mounting accessories Thanks to the cold shoe adapter, you can mount a variety of accessories, such as additional lighting or a microphone. As a result, you will increase the quality of your recordings and get the desired effects. Mounting versatility The Sunnylife mount allows you to conveniently use the DJI OSMO Pocket 3 camera in various configurations. The product is compatible with several types of mounts: a basic mount without additional accessories (Naked), a mount equipped with a 1/4" thread for attaching additional accessories (Handle with 1/4" Thread), and a mount with a built-in battery to provide additional power (Battery Handle). Additional convenience It is possible to extend the handle, which makes it easier to keep the camera in a stable position. The product allows easy filming and does not negatively affect access to the SD card. You can also conveniently attach a lanyard.   ManufacturerSunnylifeModelOP3-SD763CompatibilityOsmo Pocket 3MaterialPlastic + PU leatherDimensions100 x 43 x 39 mmWeight30 g

Insta360 Flow 2 Pro Magnetic Phone Clamp (gray) The Insta360 Flow 2 Pro Magnetic Phone Clamp is a practical accessory that allows you to instantly attach your smartphone to the gimbal. The strong magnet ensures stability, while the simple mechanism makes it a snap to get your phone ready for recording. Compatible with most smartphones With an adjustable clamping range of 64 to 84 mm, the mount fits most modern phones, regardless of their size. The lightweight design weighing just 25g does not weigh down the gimbal, allowing for longer and more comfortable use. Durable and lightweight design Being made of aluminum alloy guarantees durability and resistance to damage. One clamp is already included with the Insta360 Flow 2 Pro, but an extra one will work well as a spare or replacement if needed.   ManufacturerInsta 360NameInsta360 Flow 2 Pro Magnetic ClampModelCINSBBQDColorGrayDimensions71.2 x 33 x 20.7 mmMinimum clamp width64 mmMaximum clamp width84 mmWeight25 gMaterialAluminum alloy

Insta360 Flow 2 Pro Magnetic Phone Clamp (white) The Insta360 Flow 2 Pro Magnetic Phone Clamp is a practical accessory that allows you to instantly attach your smartphone to the gimbal. The strong magnet ensures stability, while the simple mechanism makes it a snap to get your phone ready for recording. Compatible with most smartphones With an adjustable clamping range of 64 to 84 mm, the mount fits most modern phones, regardless of their size. The lightweight design weighing just 25g does not weigh down the gimbal, allowing for longer and more comfortable use. Durable and lightweight design Being made of aluminum alloy guarantees durability and resistance to damage. One clamp is already included with the Insta360 Flow 2 Pro, but an extra one will work well as a spare or replacement if needed.   ManufacturerInsta 360NameInsta360 Flow 2 Pro Magnetic ClampModelCINSBBQDColorWhiteDimensions71.2 x 33 x 20.7 mmMinimum clamp width64 mmMaximum clamp width84 mmWeight25 gMaterialAluminum alloy

J-Hook 360-degree rotating buckle for sports cameras The J-Hook 360-degree rotating buckle for sports cameras is a reliable accessory for those actively using cameras such as GoPro and other popular models. The innovative design allows full freedom of movement and recording footage from different perspectives. The bracket is designed to meet the needs of users looking for a stable and easy-to-install solution that also provides full control over the angle and direction of recording. Full freedom of movement and adjustment One of the key advantages of the J-Hook swivel bracket is its ability to rotate 360 degrees. Such functionality allows you to easily adjust the camera to different recording angles, which is extremely useful during dynamic sports or outdoor activities. The buckle allows you to record from multiple perspectives without having to stop and adjust the camera settings manually, which greatly increases the convenience of use. Robust construction and light weight The buckle is made of high-quality plastic, which guarantees durability and resistance to mechanical damage, while maintaining a low weight (only 30 g). Thanks to its compact size and low weight, the buckle is easy to carry and does not add any extra burden during extreme sports. The length after expansion of 15 mm ensures proper fit and stability of the camera mount.   Name:J-Hook 360 degree rotating buckle for sports camerasManufacturer:TelesinModel:GP-JBK-T02Material:PlasticLength after expansion:15mmWeight:30 gCompatibility:Sports cameras (such as GoPro and others)Rotation angle:360°

Telesin Magnetic Quick Mount Kit for Sports Cameras The Telesin Magnetic Quick Mount Kit is an innovative solution for active people who want to capture their experiences from different perspectives without having to hold the camera in their hands. With strong magnets and a state-of-the-art mounting system, the kit offers quick mounting and dismounting of sports cameras, allowing you to freely create dynamic shots in any situation. Exceptional magnetic strength and safe use One of the key advantages of the Telesin kit is the use of strong NdFeB magnets, which guarantee a secure and safe attachment of the camera. The magnetic system is designed to prevent accidental detachment of the camera even when running or jumping. However, for maximum effectiveness, thin clothing is recommended to avoid reducing the magnets' adhesive force. Versatility thanks to nano-viscose The innovative nano-viscose material in the Telesin kit is a novelty that allows the camera to be attached to almost any smooth surface, such as glass, metal or tiles. This reusable nano viscose pad is easy to clean, allowing repeated use without worrying about losing its adhesive properties. As a result, the kit offers not only the traditional chest mount, but also more creative mounting options on other surfaces. Quick mounting and easy change of perspectives The Telesin kit comes with a magnetic base with two jaws, allowing you to instantly change accessories in just two seconds. This makes it easy to switch from a chest mount to a selfie stick or other mount without complicated assembly. This allows you to quickly adapt to changing conditions and needs while recording, making it an ideal choice for active content creators. Compact and easy to store The kit weighs just 119 grams and comes with a convenient waterproof storage pouch, making it ideal for any trip. Its compact size makes it easy to carry and store, and its wide compatibility with a variety of sports cameras and phones makes it an ideal addition to any film equipment collection. Included Magnetic base*1Magnetic mount*1Locking screw*1Lanyard*1Nano viscose holder*1Nano viscose protective cover*1Selfie stick adapter kit*1Storage bag*1   Name:Telesin magnetic quick mount kit for sports camerasManufacturer:TelesinModel:TE-MMK-001Dimensions (Lanyard):340~610mmDimensions (Magnetic Holder):85*55*28mmMaterial:PC plastic, stainless steel, strong NdFeB magnets, nano viscose.Weight:119gLifting capacity:300g

PULUZ 2m metal selfie holder for Insta360 One RS/X2/X3/X4 camera (black). Create unique selfies, take group photos with friends and gain unique perspectives. The Puluz PU641B metal mount extends up to 2m in length and is made of high-grade aluminum alloy, making it very stable and sturdy, yet lightweight. The accessory also has a built-in 1/4'' hole that allows it to be mounted on a tripod or boom. There is also a 1/4'' thread that allows you to seamlessly mount your camera or smartphone of choice. Adjustable length This practical mount allows 5-position length adjustment in the range of 45.5 cm / 84 cm / 122 cm / 160 cm / 200 cm. So you can easily adjust it to your needs and prepare the perfect photo! The accessory is also very comfortable to use, and thanks to the additional handle you have the possibility to hang it on your wrist - you don't have to worry about it falling out of your hand! Durable, lightweight construction High-quality aluminum alloy was used to make the handle. Thanks to this, the accessory will ensure the stability of your camera - even when you extend it to its full length, it will not wobble. It is also very durable and resistant to deformation. Despite such durability, the selfie stick is very light - it weighs only about 295 g. It will not be too much of a burden! What's more, the handle of the accessory is finished with a pleasant to the touch sponge. Wide compatibility At the bottom of the selfie stick is a 1/4'' hole, which allows you to mount it on a tripod or boom. In turn, convenient installation of a camera or smartphone is made possible by a 1/4'' thread. Thanks to it, the accessory is compatible with many models of popular devices (it may be necessary to use additional mounts, which are not included in the set).   ManufacturerPuluzModelPU641BColorBlackMaterialAluminum alloyLength45,5 cm / 84 cm / 122 cm / 160 cm / 200 cm (adjustable)WeightApprox. 295 g

Puluz 110 cm metal selfie holder for sports cameras (including Osmo Action 5 Pro, Insta360 X5 / X4 / X3) Ensure versatility and convenience when recording with the PULUZ metal selfie grip. This durable and lightweight selfie stick, made of aluminum alloy, is ideal for sports and panoramic cameras such as DJI, Insta360 and GoPro. It offers 5-position length adjustment and is very comfortable to use. Thoughtful design The PULUZ mount was created from high-quality aluminum alloy for durability and strength. The thicker tube design allows you to enjoy a higher lifting capacity and use a wide variety of devices, and the anodizing process makes the entire surface resistant to scratches and corrosion. In addition, the rubber, non-slip handle guarantees a firm grip and comfort while preventing sweaty hands. Adjustable length The handle allows 5-step length adjustment from 28 cm to as much as 111 cm. Each segment can be locked individually, allowing you to fine-tune the accessory to your needs. This makes the selfie stick extremely versatile and works in many different situations. It is ideal for taking selfies, panoramic photos and more! Universal mount The base of the grip is equipped with a 1/4-inch hole, which allows you to connect it to a tripod or extension. What's more, its top has a 1/4-inch screw, to which you can connect your camera, phone holder or adapter. This allows you to freely use a variety of devices and accessories. Practical and functional When folded, the length of the mount is only 28 cm, which makes it very easy to carry and store. This makes it the perfect companion for travel and outdoor activities! In addition, the selfie stick is distinguished by its wide compatibility - it perfectly fits many sports and panoramic cameras of well-known brands, such as DJI, GoPro or Insta360.   ManufacturerPULUZModelPU815MaterialAluminum alloyLength28-111 cm (5-stage adjustment)CompatibilityDJI: Osmo Action 5 Pro, Osmo Action 3, Action 2, Osmo Action / GoPro: HERO (2024), HERO13 Black, HERO12 Black, HERO11 Black Mini, HERO11 Black, HERO10 Black, HERO9 Black, HERO8 Black, MAX, HERO7 White, HERO7 Black, HERO7 Silver, NEW HERO, HERO6 Black, HERO5 Black, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO / Insta360: X5, X4, Ace, Ace Pro, X3, ONE RS 1-Inch 360 Edition, Insta360 ONE RS 4K Edition, Insta360 ONE RS 360 Edition, Insta360 ONE RS 1-INCH EDITION, ONE X2

Puluz 150 cm metal selfie holder for Insta360 One RS / X2 / X3 / X4 / X5 Ensure versatility and convenience when recording with the PULUZ metal selfie grip. This durable and lightweight selfie stick, made of aluminum alloy, is ideal for sports and panoramic cameras such as Insta360 and GoPro. It offers 5-position length adjustment and is very comfortable to use. Thoughtful design The PULUZ mount was created from high-quality aluminum alloy for durability and strength. The thicker tube design allows you to enjoy a higher lifting capacity and use a wide variety of devices, and the anodizing process makes the entire surface resistant to scratches and corrosion. In addition, the rubber non-slip handle guarantees a firm grip and comfort while preventing sweaty hands. Adjustable length The handle allows 5-position length adjustment from 35 cm to as much as 150 cm. Each segment can be locked individually, allowing you to fine-tune the accessory to your needs. This makes the selfie stick extremely versatile and works in many different situations. It is ideal for taking selfies, panoramic photos and more! Universal mount The base of the grip is equipped with a 1/4-inch hole, which allows you to connect it to a tripod or extension. What's more, its top has a 1/4-inch screw, to which you can connect your camera, phone holder or adapter. This allows you to freely use a variety of devices and accessories. Practical and functional When folded, the length of the mount is only 35 cm, which makes it very easy to carry and store. This makes it the perfect companion for travel and outdoor activities! In addition, the selfie stick is distinguished by its wide compatibility - it perfectly fits many sports and panoramic cameras of well-known brands, such as DJI, GoPro or Insta360.   ManufacturerPULUZModelPU816MaterialAluminum alloyLength35-150 cm (5-stage adjustment)CompatibilityDJI: Osmo Action 5 Pro, Osmo Action 3, Action 2, Osmo Action; Gopro: HERO (2024), HERO13 Black, HERO12 Black, HERO11 Black Mini, HERO11 Black, HERO10 Black, HERO9 Black, HERO8 Black, MAX, HERO7 White, HERO7 Black, HERO7 Silver, NEW HERO, HERO6 Black, HERO5 Black, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO; Insta360: X5 , X4, Ace, Ace Pro, X3, ONE RS 1-Inch 360 Edition, Insta360 ONE RS 4K Edition, Insta360 ONE RS 360 Edition, Insta360 ONE RS 1-INCH EDITION, ONE X2

Monitor Mount for NEEWER DJI/ZHIYUN/MOZA Gimbals The NEEWER GA005 monitor mount is an adjustable mount designed for use with DJI, ZHIYUN, and MOZA handheld gimbals. It offers smooth 360° rotation, a maximum load capacity of 1 kg, and three 1/4" threads that allow for mounting additional accessories. The mount measures 146 × 34 × 36 mm and weighs 110 g, allowing you to expand your filmmaking setup without significantly increasing its weight. It is compatible with various monitors and is particularly recommended for 7-inch models. Wide Compatibility with Popular Gimbals The mount works with many stabilizers used for filming and video production. It is compatible with the DJI Ronin S, Ronin SC, RS 2, RSC 2, RS 3, and RS 3 Pro, as well as with ZHIYUN WEEBILL LAB, CRANE 2S, CRANE 3S, CRANE 3 Lab, and WEEBILL S gimbals. It can also be used with the MOZA AirCross 2 stabilizer, allowing you to use a single mount across various equipment setups. Smooth 360° Adjustment The mounting mechanism allows the monitor to rotate a full 360°, making it easy to position the screen for your current workflow. The monitor can be tilted and rotated to improve visibility while framing, recording, or reviewing footage. Smooth, damped movement allows you to comfortably adjust the screen’s position without having to remove the mount. Adjustable Damping The damping force of the mechanism can be adjusted using the included L-shaped Allen wrench. This allows you to tailor the mount’s operation to the monitor you’re using and your individual preferences while working. Thanks to this solution, you can adjust the rotational resistance and set the mechanism so that changing the monitor’s position is comfortable and controlled. Stable Mounting with Two M4 Screws The NEEWER GA005 is installed using two M4 screws, ensuring a secure connection to a compatible gimbal. The design also incorporates a rosette plate and an integrated hand-operated screw, which further enhance the stability of the mount. This solution allows for a secure attachment of the monitor and reduces the risk of the mount accidentally loosening during use. Additional space for accessories The mount features three 1/4" threads, allowing you to expand the setup with additional equipment. You can attach, among other things, a microphone used during interviews, a magic arm, a super clamp, and other compatible accessories. As a result, the mount can serve as a practical component of an expanded setup for filming, photography, or vlogging. Durable aluminum alloy construction The mount is made of CNC-machined aluminum alloy, which combines durability with a lightweight design. The surface features a black anodized finish, and the entire unit weighs just 110 g. This makes the mount suitable for mobile use during outdoor shoots, where both the reliability of the equipment and ease of transport are crucial. Compact Dimensions and a Load Capacity of Up to 1 kg With a length of 146 mm and dimensions of 146 × 34 × 36 mm, the mount retains a compact form while still allowing for the installation of monitors weighing up to 1 kg. This solution is suitable for various monitors, with a particular focus on 7" models. The combination of low weight, an adjustable mechanism, and additional mounting points allows for convenient use of the mount during filming, photography, and vlogging. Included GA005 Monitor Mount x1Rosette plate x1M4 screw x2L-shaped Allen wrench x1   ManufacturerNEEWERModelGA005Product NameAdjustable Monitor Mount Extended VersionApplicationMounting a monitor to handheld gimbal stabilizersMaterialAluminum alloyMaximum Load1 kgWeight110 gDimensions146 × 34 × 36 mmLength146 mmRotation range360°Number of 1/4" threads3Recommended useVarious monitors, especially 7" monitorsDJI CompatibilityRonin S, Ronin SC, RS 2, RSC 2, RS 3, RS 3 ProZHIYUN CompatibilityWEEBILL LAB, CRANE 2S, CRANE 3S, CRANE 3 Lab, WEEBILL SMOZA CompatibilityAirCross 2

PULUZ motorcycle/bicycle mount with two clamps and selfie holder 150 cm The PULUZ mount is the perfect solution for all motorcycle and bicycle enthusiasts who want to record their adventures in high quality and unobstructed. Designed for panoramic cameras such as the Insta360 X4, and other sports cameras, it allows you to easily record 360-degree panoramic shots, capturing unforgettable moments. Durable construction The grip's clamping head is made of high-quality plastic, while the bracket's connecting rod is designed from aluminum alloy, ensuring exceptional durability and strength. Thanks to the sturdy materials, the handle is resistant to damage and long-term use in various conditions, which will make it serve you reliably for years to come. Versatility and adjustability The clamp of the holder can support handlebars or poles with a diameter range of 1.5 to 4.5 cm, making it universal and suitable for different types of vehicles. The universal ball head design of the bracket allows you to adjust different shooting angles, allowing you to customize your camera position. This will allow you to seamlessly capture dynamic moments. Telescopic selfie stick Using the 150cm long telescopic selfie stick, you can reach a height of 35cm when contracted and up to 150cm when extended. The eccentric tube design allows you to stretch the length as much as you want, and each section can be locked separately, giving you full control over your settings and stability when shooting. Stability and security The mount has two types of clamps: one double-headed and one single-headed, both equipped with 1/4-inch screws. The first clamp is used to secure the 1/4-inch screw hole at the bottom of the selfie stick, while the second clamp secures the upper end of the stick. The double clamping makes the selfie stick more stable, providing more security and stability when taking photos. From now on, you don't have to worry about blurry photos. Wide compatibility The PULUZ mount can be widely used to install panoramic cameras, sports cameras and cell phones. It is ideal for first-person perspective photography, live broadcasting, taking selfies and many other applications. In addition, the mount can be used to connect and install car navigation, adding to its functionality and practicality. This multitasking capability proves extremely useful in everyday situations, ensuring reliability and professionalism. Included: two-head clampsingle-head clampselfie stickinvisible adapterlong screwshort screw   SpecificationsManufacturerPuluzColorblackDimensions of the selfie stick150cm length when expanded, 35cm length when contractedDimensions of the handle18.5cm long (with buckles installed)Diameter of the buckleFrom 1.5cm to 4.5cmHandle materialsilicone, aluminumMaterial of construction of the selfie stickplastic

PULUZ motorcycle/bicycle mount with two clamps and selfie holder 150 cm The PULUZ mount is the perfect solution for all motorcycle and bicycle enthusiasts who want to record their adventures in high quality and unobstructed. Designed for panoramic cameras such as the Insta360 X4, and other sports cameras, it allows you to easily record 360-degree panoramic shots, capturing unforgettable moments. Durable construction The grip's clamping head is made of high-quality plastic, while the bracket's connecting rod is designed from aluminum alloy, ensuring exceptional durability and strength. Thanks to the sturdy materials, the handle is resistant to damage and long-term use in various conditions, which will make it serve you reliably for years to come. Versatility and adjustability The clamp of the holder can support handlebars or poles with a diameter range of 1.5 to 4.5 cm, making it universal and suitable for different types of vehicles. The universal ball head design of the bracket allows you to adjust different shooting angles, allowing you to customize your camera position. This will allow you to seamlessly capture dynamic moments. Telescopic selfie stick Using the 150cm long telescopic selfie stick, you can reach a height of 35cm when contracted and up to 150cm when extended. The eccentric tube design allows you to stretch the length as much as you want, and each section can be locked separately, giving you full control over your settings and stability when shooting. Stability and security With two double clamps, the selfie stick is double clamped for added stability and protection. When locked, the selfie stick is more stable, making photography even easier and safer. From now on, you don't have to worry about blurry photos. Wide compatibility The PULUZ mount can be widely used to install panoramic cameras, sports cameras and cell phones. It is ideal for first-person perspective photography, live broadcasting, taking selfies and many other applications. In addition, the mount can be used to connect and install car navigation, adding to its functionality and practicality. This multitasking capability proves extremely useful in everyday situations, ensuring reliability and professionalism. Included: selfie stickinvisible adapterlong screwshort screwdouble head clamp (2x)   ManufacturerPuluzColorblackDimensions of the selfie stick150cm length when expanded, 35cm length when contractedDimensions of the handle18.5cm long; diameter of the buckle from 1.5cm to 4.5cmHandle materialsilicone, aluminumMaterial of construction of the selfie stickplastic

NEEWER ST83 Mount The NEEWER ST83 is a universal Super Clamp mount with two 360° rotating ball heads, designed for securely mounting smartphones, action cameras, monitor screens, LED lights, and microphones. It works perfectly on flat surfaces and tripods, as well as on round profiles—such as selfie sticks, handlebars, or lighting booms. With a load capacity of up to 3 kg, it ensures safe and stable use with a wide variety of photography and video accessories. Secure grip on flat and round surfaces The Super Clamp can be mounted on components with a diameter or width of 14 mm or more. Its V-shaped profile ensures stability on round profiles, while the rotating silicone tips increase grip and protect the surface from scratches. The clamp is also compatible with gimbal tubes with diameters of 25 and 30 mm (includingthe DJI Ronin-M, Ronin MX, and Freefly Movi). 360°-Adjustable Magic Arm The 3" / 7.62 cm Magic Arm is equipped with two 360° rotating ball joints. This allows you to position the mounted equipment at various angles and quickly adjust its orientation to the current shot or mounting location. A screw knob allows you to securely lock the heads in the desired position, so changing the configuration doesn’t require complicated adjustments. Smartphone and Action Camera Mounts The kit includes an adjustable phone mount (compatible with devices ranging from 55 to 85 mm in width) and an adapter for action cameras. The kit works seamlessly with most popular smartphones—including newer iPhone models, Samsung Galaxy, and Huawei—as well as cameras from the GoPro Hero, DJI OSMO Action, and Insta360 series. This means you can conveniently use a single accessory to record with various devices. More possibilities thanks to additional mounting points The NEEWER ST83 features 1/4" threads, ARRI positioning points, and a built-in cold shoe mount, allowing you to expand the kit with additional accessories. Using a 1/4" screw, you can attach a monitor, LED light, microphone, or other compatible device, among other options. The cold shoe makes it easy to quickly mount LED lights and microphones; however, it is not designed for on-camera speedlite flashes. Robust Construction for Frequent Use The clamp and arm are made from a combination of aluminum alloy and stainless steel, utilizing precision CNC machining. This design ensures durability while keeping the kit’s weight at 205 g. Non-slip rubber pads on the clamp and the device’s mounting plate improve mounting stability while helping to protect your equipment and surfaces from scratches. Included in the set NEEWER ST83 mount x1Phone mount x1User manual x1Action camera mounting adapter x1Detachable cold shoe adapter x1   ManufacturerNEEWERModelST83Jaw opening range0.6"–2.4" / 14–60 mm; general specifications also list a maximum of 2.5" / 64 mmMagic Arm length3" / 7.62 cmBall joint rotation360°Supported smartphone width2.2"–3.3" / 55–85 mmMaximum load capacity6.6 lb / 3.0 kgDimensions6" x 3.4" x 1.6" / 152 x 86 x 41 mmMaterialAluminum alloy, stainless steel, rubberWeight7.23 oz / 205 gMounting Points1/4" threads, ARRI positioning points, cold shoeCompatible Gimbal SticksDJI Ronin-M, DJI Ronin MX, Freefly Movi 25 mm and 30 mm

Neewer CA013 1/4-inch suction cup mount for sports cameras (DJI Action, GoPro, Insta360) Neewer CA013 is a mount with a 6-inch vacuum pump and articulated arm, designed to work with sports cameras, mirrorless cameras and smartphones. You will successfully use it with models such as GoPro Hero 12 Black / 11 Black / 10 Black / 9 Black / 8 Black / 7 Black, GoPro Max, Insta360 X4 / X3 / Go 3 / Ace Pro, DJI Osmo Action 4 / 3 / 2, AKASO Brave 4, as well as Sony, Canon and Nikon brand devices (including DSLRs). Thanks to the vacuum system, mounting on smooth surfaces is fast and safe, and the full angle adjustment allows you to position the device accurately. High holding power The Neewer CA013 mount offers a load capacity of up to 5 kg when traveling (up to 80 km/h), and on a stationary surface it holds up to 40 kg horizontally and 50 kg vertically. This range allows safe use with heavier equipment even in off-road conditions and during dynamic shots from a car. Mounting on various surfaces The suction cup works effectively on glass, metal, ceramic surfaces and smooth wooden plates. Thanks to the silicone construction of the mounting cup and the aluminum handles, the device ensures a lasting grip even in adverse weather conditions. Universal attachment points 1/4" and 3/8" threads allow mounting of a variety of accessories - from sports camera mounts to ARRI adapters to boom arms or smartphones. Suitable screw adapters are also included, increasing compatibility with a variety of equipment. Free position adjustment Dual ball heads in the articulating arm allow for smooth 360° rotation and precise angle adjustment. Non-slip rubber pads stabilize the unit once it is attached, and a clamping screw allows quick locking of settings. Durability and easy cleaning Construction made of aluminum and silicone rubber guarantees resistance to scratches, corrosion and changing weather conditions. The materials are easy to clean with water and can withstand heavy use in the field. Included: Vacuum mount with pumpArticulated armL-shaped allen wrench x21/4" adapter3/8" adapter   ManufacturerNeewerModelCA013MaterialAluminum alloy, silicone rubberVertical load capacity (in motion)5 kgVertical load capacity (static)50 kgHorizontal load capacity (static)40 kgSuction cup diameter6" / 153 mmHeight2.6" / 66 mmWeight546 g

Sunnylife bracket and magnetic mount for Insta360 X4 / X5 The Sunnylife X4-ZJ827 Holder and Magnetic Mount is a versatile accessory designed specifically for users of the Insta360 X4, Insta360 X5, DJI Osmo Pocket 3 or Insta360 GO 3S cameras. Its functionality and innovative design make it ideal for mounting your device in various locations. Security and stability Equipped with 8 strong magnets, this mount provides a secure and stable attachment for your camera. This allows you to attach it to your car, motorcycle or other metal surfaces without worrying about it moving or falling. In addition, non-slip silicone pads further protect your equipment from scratches and guarantee its stability. Mounting the camera is very simple and fast - it is done with a ¼ inch screw. Versatile application Sunnylife X4-ZJ827 also acts as a convenient mount, and allows you to stably place the camera on a flat surface of your choice. It also allows you to charge the device in an upright position. What's more, the option to adjust the tilt of the accessory makes it easy for you to get the desired recording angle. But it doesn't stop there - thanks to its foldable design, the mount is easy to transport and easy to take on any trip.   ManufacturerSunnylifeNameSunnylife Multi-use Magnetic MountModelX4-ZJ827MaterialPlastic + magnet + siliconeWeight59 gCompatibilityInsta360 X4, Insta360 X5, DJI Osmo Pocket 3, Insta360 Go 3S

Neewer CM-NA-1 microphone boom arm mount During long recording sessions, comfort is of the utmost importance, which is why the Neewer CM-NA-1 mount allows you to securely attach a microphone boom to a C-stand or a classic microphone stand. This eliminates the need to hold the boom pole in your hands the entire time, allowing the operator to work more comfortably even during long recording sessions. Stable mounting without the risk of scratches The mount is made of metal, ensuring high durability and secure support for the boom pole. The extra-wide 6 cm yoke makes it easy to quickly position the boom pole and provides greater comfort than narrower designs. The inner surface is coated with a protective layer that shields the boom pole from scratches and damage during installation and adjustment. The design does not use traditional clamping jaws, so it does not exert excessive pressure on the surface of the boom pole. Sturdy stainless steel spindle The CM-NA-1 model is equipped with a 3.5-inch steel spindle that fits securely into grip heads without play or unwanted wobble. The 5/8" thread ensures compatibility with popular microphone stands and studio accessories. The black lacquered finish gives the mount a professional look and increases its durability for everyday use. Compact, ready-to-use design Measuring 17.5 × 13.5 × 7 cm, the mount remains handy and easy to transport, while its sturdy metal construction guarantees reliable performance over the long term. The Neewer CM-NA-1 is a simple yet extremely useful piece of equipment for any sound engineer who wants to work more comfortably and confidently during recordings. Specifications ManufacturerNEEWER ModelCM-NA-1 Product typeMicrophone boom arm mount ColorBlack MaterialMetal, stainless steel FinishPainted Yoke width6 cm Spindle length3.5 inches Thread5/8" Dimensions17.5 × 13.5 × 7 cm Weight0.32 kg