Skip to main content Skip to search Skip to main navigation
SMART CHOICES. SIMPLY SORTED.

Tripods

Tripods

The tripods category at That’s Easy brings the relevant products together in one place.

Camera supports, tripods and stabilisers position compatible equipment during recording. They support different heights, angles or ways of holding it. Mounting and supported weight determine the combinations available with a camera or phone.

A tripod gives compatible equipment a freestanding support during recording, so the camera or phone does not need to be held continuously.

Tripods at That’s Easy

The range of tripods brings different versions together. Product information describes the functions and supplied components of each model. Subcategories include: Mounts.

Filter products
1.16m long Telesin carbon fiber selfie stick for sports cameras
1.16m long Telesin carbon fiber selfie stick for sports cameras

1.16m long Telesin carbon fiber selfie stick for sports cameras The Telesin Carbon Fiber Selfie Stick is the perfect solution for all extreme sports, travel and photography enthusiasts. Thanks to its advanced design and the use of high-quality materials, it is an accessory that allows you to capture wide-angle shots and beautiful panoramas from different perspectives, regardless of the conditions. Lightweight and durable The main material used in the construction of this selfie stick is carbon fiber, which makes it much lighter and at the same time more durable compared to traditional models made of aluminum. Carbon fiber is not only lighter, but also more stable and durable, which means that the selfie stick does not deform even after prolonged use. This feature makes it an ideal choice for active people who need reliable equipment in any situation. Corrosion resistance and diving capability Thanks to its high corrosion and impact resistance, the Telesin selfie stick is suitable for underwater use. You can take it diving to capture amazing photos under the surface of the water without worrying about damaging your equipment. The sturdy construction and high quality materials used make the selfie stick perform well even in harsh conditions. Adjustable length for versatile use The Telesin selfie stick offers an adjustable length from 25 cm to 116 cm, allowing you to adapt it to different photographic needs. Four length settings (25 cm, 56 cm, 86 cm, 116 cm) allow you to get the perfect perspective for any shot, from close-up selfies to wide-angle panoramic shots. It is also the so-called "golden distance" for panoramic cameras, allowing for the best results when filming. Multifunctionality and compatibility with various devices Thanks to the built-in 1/4-inch thread on the top and bottom of the selfie stick, it can be easily connected to various devices, such as cameras, sports cameras and tripods. This is perfect for those who need a versatile piece of equipment for multiple uses. The 1/4-inch thread allows use with adapters, which expands the possibilities for mounting various accessories. Compactness and easy portability The Telesin Selfie Stick is only 25 cm long when folded and weighs only 82 g, making it extremely easy to carry. It can be easily stowed in a bag or backpack, and the included storage pouch further protects the equipment from damage. Its lightweight and compact design makes it the perfect companion for any trip. Invisible selfie stick for panoramic cameras For users of panoramic cameras, the Telesin selfie stick offers a unique feature - once the panoramic cameras are mounted, the stick becomes "invisible" in the photos, allowing you to get clear and professional shots without visible elements holding the camera. Included Storage bag*1Selfie stick*1   Manufacturer:TelesinModel:TE-MNP-117Weight:82gDimensions:250-1160gMaterial:Carbon fiber + Aluminum alloy

Regular price: €19.50
5-in-1 Multifunctional Camera Tripod
5-in-1 Multifunctional Camera Tripod

5-in-1 Multifunctional Camera Tripod The 5-in-1 multifunctional camera tripod is a versatile solution for photographers, videographers, and content creators who expect maximum functionality in a single product. Made of 10-layer carbon fiber and aluminum alloy, it offers five operating modes: tripod, monopod, freestanding monopod (thanks to the short, screw-in base legs), desk tripod, and trekking pole. With a load capacity of up to 20 kg and a weight of just 1.65 kg, its design ensures stability even when working with heavy photographic equipment. Adjustable height from 17.5 to 157 cm, an integrated smartphone holder, a 360° ball head, and compact dimensions when folded (55 × 7 cm) make this tripod ideal for both studio use and travel. One tripod—five practical uses This model was designed for users who don’t want to carry around several different accessories. Depending on your needs, you can quickly convert it into a classic camera tripod, a monopod, a freestanding monopod with short legs, a desk tripod, or a trekking pole. As a result, the same equipment works well for landscape photography, video recording, live streaming, product photography, and mountain hikes. Changing the configuration is quick and requires no additional parts beyond the accessories included in the set. Stable construction for lightweight and professional gear The combination of carbon fiber and a durable aluminum alloy ensures high structural rigidity while keeping the weight low. A maximum load capacity of 20 kg allows for the safe use of mirrorless cameras, DSLRs, camcorders, spotting scopes, or other devices equipped with a standard mounting thread. The 35 mm diameter ball head ensures smooth framing and secure support for your equipment. The leg twist locks effectively secure the selected height, allowing the tripod to remain stable even when working with heavier setups. Freedom to frame your shot in any conditions The height adjustment range from 175 to 1570 mm allows you to adapt the tripod’s setup to various shooting situations. The legs can be spread at three angles—22°, 55°, and 85°—which makes it easier to set up your equipment stably on uneven ground. The reversible center column allows you to take impressive macro photos and shots from a very low angle without the need for additional accessories. The head offers 360° panoramic rotation and up to 90° tilt, making precise framing convenient for both photography and videography. Convenient camera and smartphone operation The tripod is equipped with an Arca-type quick-release plate with a 1/4" thread, so mounting your camera takes just a moment. The plate itself measures 65 × 38 × 10 mm, making it easy to adapt to compatible mounting systems. The integrated smartphone mount supports devices ranging from 52 to 85 mm in width, so it fits most modern phones, including many models used with cases. Additional features include a built-in spirit level, two 1/4"-20 accessory threads for mounting a light or microphone, and an integrated hook that doubles as a tool, allowing you to quickly add weight to the tripod or make minor adjustments without having to search for additional accessories. A compact companion for every trip Despite its extensive capabilities, the tripod weighs only 1.65 kg, so it’s not a burden to carry. When folded, it measures 55 cm in length and just 7 cm in diameter, so it fits easily into the included carrying case and can be conveniently packed in a backpack or luggage. The sturdy construction is designed for heavy-duty use both in the field and in the studio. It’s a practical choice for those looking for a single tripod for photography, videography, mobile work, and everyday trips. Included 5-in-1 camera tripodShort legs for desktop mode and freestanding monopod x 3Arca-Type quick-release plateWeight hookAllen wrenches x 2Carrying caseUser manual   ManufacturerFreewellModelFW-T2Material10-layer carbon fiber, aluminum alloyMaximum load capacity20 kgWeight1.65 kgMinimum height175 mmMaximum height1570 mmLength when folded550 mmDiameter when folded70 mmBall head35 mmPanoramic rotation360°Head tiltup to 90°Leg spread angle adjustment22°, 55°, 85°Number of leg sections3Quick-release plateArca-Type, 65 × 38 × 10 mmPlate thread1/4"Head mounting thread3/8"Smartphone clamp range52–85 mm

Regular price: €266.00
Adapter ring Freewell Brandon Li 49mm
Adapter ring Freewell Brandon Li 49mm

Freewell Brandon Li 49mm Adapter Ring The Freewell Brandon Li 49mm adapter ring is a base component designed for the Brandon Li x Freewell VND/CPL Basic & Pro Kit filter system. It allows you to mount the VND/CPL system on a lens with a 49 mm thread, providing a stable base and a secure fit for the filter. The ring has an outer diameter of 91.8 mm, is 4.95 mm thick, and weighs 25.1 g, so it does not add significant weight to your photography or filmmaking setup. A Stable Base for the VND/CPL Filter The Base Ring ensures a stable connection between the lens and a compatible Brandon Li x Freewell filter system. Once screwed onto the lens thread, it creates a solid base onto which a VND/CPL filter can be mounted. This allows you to conveniently set up your equipment for recording or photography and use filters without having to rely on additional, haphazardly chosen adapters. Magnetic Mounting of Additional Filters The system’s design also allows for the use of compatible magnetically mounted filters, such as the ND32 or Black Glow Mist 1/4. The magnetic mounting method makes it easy to quickly change the configuration depending on lighting conditions or the desired image effect. This allows you to efficiently add more system components without the time-consuming process of screwing on filters each time.   ManufacturerFreewellModelFW-BL-SU49Product TypeBase ringLens Thread Size49 mmOuter Diameter91.8 mmThickness4.95 mmWeight25.1 gCompatibilityBrandon Li x Freewell VND/CPL Basic & Pro Kit

Regular price: €26.50
Adapter ring Freewell Brandon Li 55mm
Adapter ring Freewell Brandon Li 55mm

Freewell Brandon Li 55mm Adapter Ring The Freewell Brandon Li 55mm adapter ring is a base component designed for the Brandon Li x Freewell VND/CPL Basic & Pro Kit filter system. It allows you to mount the VND/CPL system on a lens with a 55 mm thread, providing a stable base and a secure fit for the filter. The ring has an outer diameter of 91.8 mm, is 4.95 mm thick, and weighs 23.5 g, so it does not add significant weight to your photography or film equipment. A Stable Base for VND/CPL Filters The Base Ring ensures a stable connection between the lens and a compatible Brandon Li x Freewell filter system. Once screwed onto the lens thread, it creates a solid base onto which a VND/CPL filter can be mounted. This allows you to conveniently set up your equipment for recording or photography and use filters without the need for additional, haphazardly chosen adapters. Magnetic Mounting for Additional Filters The system’s design also allows for the use of compatible magnetic filters, such as the ND32 or Black Glow Mist 1/4. The magnetic mounting system makes it easy to quickly change the configuration depending on lighting conditions or the desired image effect. This allows you to efficiently add additional system components without the time-consuming process of screwing on filters each time.   ManufacturerFreewellModelFW-BL-SU5Product TypeBase RingLens Thread Size55 mmOuter Diameter91.8 mmThickness4.95 mmWeight23.5 gCompatibilityBrandon Li x Freewell VND/CPL Basic & Pro Kit

Regular price: €26.50
Adjustable bicycle clamp Sunnylife for sports camera
Adjustable bicycle clamp Sunnylife for sports camera

Sunnylife universal bike mount for sports cameras Capture your next bike trip from an unusual perspective. The Sunnylife universal mount is compatible with most sports cameras (for example, GoPro, DJI Action), and thanks to the included three silicone rings of different diameters, it fits many handlebar models. The accessory is made of durable materials and comes with a special non-slip pad, which guarantees greater stability and protects against scratches. You can also adjust the tilt of the camera mounted on it (up to 180°), as well as rotate it 360°. The mount also has places for Air Tag and is very easy to install. Wide compatibility The mount is compatible with sports cameras such as GoPro, Insta360 Ace, Insta360 GO, Insta360 ONE R, Insta360 X4/X5 or DJI Action, for example. You can also use additional adapters (not included) to mount a DJI Pocket series device, Insta360 ONE X or even a smartphone. In the package you will also find 3 interchangeable rings, so that the product fits bicycle handlebars of different diameters (29-35 mm, 24-30 mm, 19-24 mm). Included Bike holderSilicone ring 29-35 mmSilicone ring 24-30 mmSilicone ring 19-24 mmScrew   ManufacturerSunnylifeModelZJ758MaterialPlastic + silicone + metalWeight139 gCompatibilitySports cameras such as DJI Action, GoPro, Insta360 ONE R, Insta360 Ace, Insta360 X4/X5, etc.

Regular price: €18.50
Adjustable mount for sporotome cameras Puluz with clamp
Adjustable mount for sporotome cameras Puluz with clamp

Puluz adjustable sports camera mount with clamp The Puluz PU740B is a sturdy and versatile mount that will work well in many situations - from dynamic shots on the move to stable frames in unusual locations. Made of sturdy materials, it provides durability and resistance to heavy use, both outdoors and indoors. Tailored to you An 8-position adjustable flexible arm allows you to freely adjust the camera's angle, making it easy to get interesting perspectives. The sturdy clamp fits surfaces from 0.6 to 5 cm in diameter, so you can mount it on a pipe, countertop, tripod or even a branch, for example. Several mounting options The PU740B offers various mounting options - you can attach a sports camera directly, use an adapter with a 1/4-inch screw to attach a compact camera, or use a phone mount. Included clampadjustable handle armphone holdermountadapter ¼"long screw   ManufacturerPuluzModelPU740BColorblackCompatibilityDJI: Osmo Action 5 Pro, Osmo Action 3, Action 2, Osmo Action; Gopro: HERO (2024), HERO13, HERO12, HERO11 Mini, HERO11 Black, HERO10, HERO9, HERO8, MAX, HERO7, NEW HERO, HERO6, HERO5, HERO5 Session, Hero Session, HERO4 Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO; Insta360: X5, X4, Ace, Ace Pro, X3, ONE RS 1-Inch 360 Edition, Insta360 ONE RS 4K Edition, Insta360 ONE RS 360 Edition, Insta360 ONE RS 1-INCH EDITION, ONE X2

Regular price: €10.50
Camera cage SMALLRIG 2918
Camera cage SMALLRIG 2918

SMALLRIG 2918 Camera Cage The SmallRig 2918 is a lightweight aluminum cage designed for the Sony Alpha 7 III, Alpha 7R III, and Alpha 9 cameras, providing access to the camera’s controls and additional mounting options for accessories. The frame is secured with a 1/4"-20 screw and an additional M2.5 screw, which prevents the camera body from rotating inside the cage. Users have access to numerous 1/4"-20 and 3/8"-16 threads, ARRI-standard mounts, and a cold shoe socket, allowing for the expansion of a photography or film setup. Weighing approximately 167.2 g, the cage does not significantly add weight to the camera, even when used with additional accessories. Stable Camera Mounting The SmallRig 2918 is designed to fit the bodies of compatible Sony cameras while maintaining convenient access to their buttons and basic functions. The main 1/4"-20 screw secures the camera body to the cage, while an additional M2.5 screw utilizes the strap hole to prevent the camera from rotating unintentionally. The two-point mounting system helps keep the camera stable even when using additional grips or other accessories. Multiple options for mounting accessories The cage features 1/4"-20 and 3/8"-16 threaded holes, ARRI mounts, and a cold shoe, allowing you to tailor the equipment configuration to the needs of the photographer or cinematographer. The ARRI mounts located on the top and side of the frame use locking pins that help prevent compatible accessories from rotating once mounted. The cage can be expanded with, among other accessories, the SmallRig 1984 top handle, the HSN2093C wooden side handle, the ARRI 2165C handle, or the Magic Arm 2115. Aluminum Construction and Built-in Screwdriver The SmallRig 2918 is made of aluminum alloy, which keeps it lightweight while maintaining a rigid structure suitable for everyday use. Its compact dimensions of 143.5 × 106 × 58.5 mm ensure a snug fit around the body of a compatible camera without making it bulky. The bottom of the cage also features a built-in screwdriver, allowing you to tighten the mounting screws without needing additional tools. Included SmallRig 2918 Cage   ManufacturerSmallRigModel2918CompatibilitySony Alpha 7 III, Sony Alpha 7R III, Sony Alpha 9Materialaluminum alloyProduct dimensions143.5 × 106 × 58.5 mmWeight167.2 gCamera Mount1/4"-20 screw and M2.5 screwMounting Threads1/4"-20 and 3/8"-16MountsARRI-style, cold shoe

Regular price: €61.00
Camera cage SMALLRIG Sony ZV-E10 Grip
Camera cage SMALLRIG Sony ZV-E10 Grip

SMALLRIG Sony ZV-E10 Grip Camera Cage The SmallRig 3538B cage is a full protective cage designed for the Sony ZV-E10 camera, which protects the body while allowing you to expand your setup with additional accessories. The design features an ergonomic grip with a silicone finish, an Arca-type quick-release plate, and numerous mounting points including 1/4"-20, ARRI 3/8"-16, and cold shoe mounts. As a result, the cage works well whether you’re shooting handheld or using a tripod, gimbal, or other film kit components. Stable Mounting and a More Comfortable Grip The camera is secured in the cage using a bottom 1/4"-20 screw and an additional lock that prevents the body from rotating inside the frame. The ergonomically contoured grip makes it easy to hold the Sony ZV-E10 securely while shooting handheld, and the silicone surface provides extra grip. Protective elements are also incorporated inside the cage to reduce the risk of scratching the camera during installation and everyday use. Expanding the Setup and Continuous Power Supply Numerous 1/4"-20 threaded holes and ARRI 3/8"-16 mounting holes allow you to attach additional grips, a power bank mount, and other compatible accessories. There are also cold shoes on the top and bottom of the cage that can be used to mount a microphone, LED light, or other equipment. A special cutout near the battery door allows you to route the cable of a dummy battery, enabling continuous power while still allowing you to place the camera flat on a surface. Quickly Switch Recording Modes An Arca-type plate built into the bottom of the cage allows you to quickly mount the camera on a compatible tripod without having to remove the entire assembly. This solution makes it easy to switch between handheld recording and tripod use, especially when the type of shots you’re taking changes frequently. The bottom mounting points are also compatible with the top quick-release plates for the DJI RS 2, RSC 2, RS 3, and RS 3 Pro gimbals. Unrestricted Access to the Camera The cage’s design is tailored to the Sony ZV-E10 so that, once mounted, you can still comfortably access the buttons, memory card slot, battery compartment, and tilting screen. This allows you to leave the camera in the cage during normal operation without having to remove it frequently. The construction, made of aluminum alloy, stainless steel, and silicone, ensures durability, and the weight of approximately 149 g does not add excessive load to the entire setup. Included SmallRig cageSide lockM2.5 screwAllen wrench x 2   ManufacturerSmallRigModel3538BCompatibilitySony ZV-E10TypeFull protective cage with handleMounting points1/4"-20Alignment holesARRI 3/8"-16Cold shoe mountsTop and bottomQuick-release plateArca-typeCompatibility with gimbalsDJI RS 2, RSC 2, RS 3, RS 3 ProProduct dimensions128.9 × 82.6 × 60.2 mmNet weight149 g ± 5 gMaterialaluminum alloy, stainless steel, silicone

Regular price: €61.00
Camera mount SMALLRIG Magic Arm 2066B
Camera mount SMALLRIG Magic Arm 2066B

SMALLRIG Magic Arm 2066B Camera Mount The SMALLRIG Magic Arm 2066B is a 9.8-inch articulated arm equipped with 1/4"-20 threads at both ends. It allows you to mount, among other things, a monitor, as well as other photography and video accessories equipped with compatible 1/4"-20 threaded holes. With a maximum load capacity of 1.5 kg, the arm can be used with many popular pieces of equipment, and its aluminum alloy and stainless steel construction combines light weight with durability. Convenient Adjustment The articulated design allows you to position the mounted accessory at an angle suited to your current needs. An ergonomic wing nut allows you to quickly loosen the mechanism, reposition the arm, and lock it back into place. This makes it easy to adjust the position of a monitor or other equipment while photographing, filming, or working with a complex rig. Secure device mounting The mounting designed for monitors, among other devices, features a rubber pad that limits direct contact between the device and the metal arm component. It helps protect the surface of the mounted equipment from scratches while also ensuring a secure hold. The presence of 1/4"-20 screws at both ends allows the SMALLRIG Magic Arm 2066B to work with a wide range of compatible photography and video accessories. Included in the set SMALLRIG Magic Arm 2066B   ManufacturerSmallRigModel2066BArm length9.8 inchesMounting1/4"-20 screw on both endsMaximum load1.5 kgProduct dimensions140 × 60 × 25 mmProduct weight225 gMaterialaluminum alloy, stainless steelCompatibilitydevices and accessories with a 1/4"-20 mount

Regular price: €22.00
Camera mount SMALLRIG Magic Arm Crab Clamp Kit
Camera mount SMALLRIG Magic Arm Crab Clamp Kit

SMALLRIG Magic Arm Crab Clamp Kit Camera Mount The SMALLRIG Magic Arm Crab Clamp Kit 4766 is a mounting kit designed for smartphones, action cameras, webcams, and other lightweight devices weighing up to 0.25 kg. The kit includes a 56 cm adjustable Magic Arm, a Crab Clamp, a phone mount, and a 1/4"-20 to 3/8"-16 thread adapter. The clamp can be attached to surfaces up to 50 mm thick and cylindrical objects with diameters ranging from 18 to 60 mm, making the kit ideal for recording videos, live streaming, video conferencing, or creating podcasts. Stable Mounting and Convenient Adjustment The Magic Arm features adjustable joints that allow you to position the mounted device at the right angle and adjust its placement to suit your desired shot. The arm connects to the clamp via a 1/4"-20 screw with an anti-rotation lock, which helps maintain the stability of the structure during use. The ball head is equipped with rubber pads that increase friction, while silicone elements on the clamp ends improve grip and reduce the risk of scratching surfaces. For smartphones, cameras, and audio accessories The included mount supports smartphones with widths ranging from 5.5 to 8.5 cm, so the kit can be used for activities such as recording videos, video calls, and social media content. The 1/4"-20 to 3/8"-16 adapter also allows you to connect compatible microphones and other accessories used for streaming, podcasting, or audio recording. The main components of the kit are made of aluminum alloy, which keeps the weight down to approximately 310 g while maintaining sufficient rigidity when used with lightweight equipment. Included Magic ArmCrab ClampPhone Mount1/4"-20 to 3/8"-16 thread adapter   ManufacturerSmallRigModel4766Magic Arm length56 cmMaximum load0.25 kgPhone mount range5.5–8.5 cmMaximum thickness of mounting surface50 mmDiameter of cylindrical mounting elements18–60 mmThread1/4"-20Adapter1/4"-20 to 3/8"-16Materialaluminum alloyProduct dimensions649 × 71 × 29 mmProduct weight310 g

Regular price: €39.00
CapLock Rearview Mirror Mount PGYTECH P-GM-170
CapLock Rearview Mirror Mount PGYTECH P-GM-170

PGYTECH P-GM-170 handlebar mount The PGYTECH P-GM-170 handlebar mount will allow you to create spectacular footage during motorcycle trips or bike tours. You can freely adjust its camera position in 2 levels of 360° and 180°, and thanks to its patented rotating structure, it provides not only stability but also security, allowing you to focus solely on recording. Unlimited perspectives Now you can experiment with different perspectives and create amazing shots without any limitations. With a ball mechanism and the ability to swivel in two directions, the mount provides full freedom of movement, allowing you to position the camera in any position. Wide compatibility The mount also includes special bushings of different diameters (6mm/8mm/10mm/12mm/14mm), making it compatible with different types of handlebars and devices. The mount works perfectly with many sports cameras - no matter what kind of equipment you have, this mount is sure to fit your needs. Quick installation Thanks to the innovative CapLock patent system, the installation and removal process becomes extremely simple and intuitive. No longer do you have to waste precious time on complicated mounting operations. With just a few quick movements, you can attach or remove the device, so you can focus on what matters most - creating memorable shots and recordings. Included: Handlebar mountAdapter for sports cameraScrew1/4 adapterScrewdriver (S3/S4) x2Tube sleeve (6/8/10/12/14mm)User manual   ManufacturerPGYTECHModelP-GM-170MaterialAluminum alloy + PA + rubberWeight81 gDimensions90 x 40 x 40 mmCompatibilitySports cameras, smartphones

Regular price: €23.90
Cellphone Mount Sunnylife for Osmo Pocket 3
Cellphone Mount Sunnylife for Osmo Pocket 3

Cellphone Mount Sunnylife for Osmo Pocket 3 If you're an Osmo Pocket 3 owner and want to enjoy an even larger screen during your filming adventures, the Sunnylife phone holder is the solution you're looking for. It allows you to mount your phone in front of the device, opening up completely new possibilities for you. Perfect Fit No need to worry whether the holder will fit your Osmo Pocket 3 - it is specifically designed with this camera in mind. This ensures that your devices work perfectly together. Moreover, the Osmo Pocket 3 with the mounted holder can stably stand on various surfaces, making video recording even more versatile. Whether you're working at a desk or out in the field, the holder will be a reliable companion! Convenient and Practical The holder is carefully designed not to interfere with one-handed operation. This gives you full control over your camera and allows you to freely capture every moment. Want to use your Osmo Pocket 3 with a tripod? No problem - the holder is equipped with a standard 1/4 inch screw hole, meaning you can easily mount it on a tripod or other similar accessory. Ready for Action Know that your phone is safe. The Sunnylife phone holder has a soft finish that protects against scratches and damages that might occur during use. Moreover, its installation is hassle-free! Start recording amazing videos using the Sunnylife phone holder. ManufacturerSunnylife ModelOP3-ZJ747 CompatibilityOsmo Pocket 3

Regular price: €11.50
Cold shoe mount for Insta360 X4 / X3 / X2 cameras
Cold shoe mount for Insta360 X4 / X3 / X2 cameras

Cold shoe mount for Insta360 X4 / X3 / X2 cameras. Mount designed specifically for Insta360 X4, X3, ONE X2 cameras. It allows you to expand your device with accessories such as a microphone or flash, for example, and is also compatible with selfie sticks. This gives you even more recording options! The product weighs only about 7 g, and is made of durable aluminum alloy.   ManufacturerInsta360NameX3/X2 Cold ShoeModelPT-21MaterialAluminum alloyWeight7 gCompatibilityInsta360 X4, X3, ONE X2

Regular price: €16.50
Desktop tripod NEEWER Small (red)
Desktop tripod NEEWER Small (red)

NEEWER Small Table Tripod (Red) This compact aluminum alloy tripod provides stable support while taking photos and recording, yet remains easy to transport. It offers height adjustment from 17 to 50 cm, a maximum load capacity of 5 kg, and a low-profile 360° rotating ball head. When folded, it’s just 17 cm long and weighs 700 g, making it easy to take with you to a photo shoot or on a trip. Flexible Height Adjustment The five-section legs allow you to freely adjust the tripod’s height to suit your shot and the surrounding conditions. The adjustment range from 17 to 50 cm makes it easy to frame shots from a low angle or work with the camera positioned higher up. Additionally, the extendable center column allows you to increase the height by 10 cm, which is ideal for shots taken from above. Low-angle photography The minimum height of 17 cm allows you to position the camera close to the subject or surface. This design makes it easier to take macro photos from a short distance and to compose shots from a low angle. The adjustable design provides greater freedom in setting up your equipment without the need for a large, full-size tripod. 360° Rotating Ball Head The low-profile ball head allows for smooth 360° rotation of the camera, enabling you to comfortably frame your shot and take panoramic photos. The built-in bubble level helps you ensure your equipment is properly aligned, and the Arca-Swiss quick-release plate allows you to quickly attach or remove your camera. The tripod uses a standard 1/4-inch thread. Stable Placement on Various Surfaces The 3-step leg angle adjustment lets you adjust the legs’ position with the push of a button, increasing flexibility when setting up the tripod on a table or desk. Non-slip feet help maintain a stable position while taking photos and recording video. The durable yet lightweight aluminum body supports a load of up to 5 kg, allowing for the mounting of a wide range of cameras and camcorders. For Cameras, Camcorders, and Smartphones The tripod is compatible with many DSLR cameras, mirrorless cameras, camcorders, and smartphones. It works with equipment from brands such as Canon, Nikon, Pentax, Panasonic, Sony, Samsung, and Olympus, as well as other digital SLR cameras. The camera or phone shown in the product images is not included in the set. Included Aluminum alloy tripodInstruction manual   ManufacturerNEEWERMaterialAluminum alloyColorBlack and redMaximum load5 kgMaximum height50 cmMinimum height17 cmLength when folded17 cmNet weight700 gNumber of leg sections5Leg angle adjustment3-stepHead rotation360°Standard thread1/4 inchLevelBubble level

Regular price: €58.50
Dog chest strap PULUZ for action cameras (GoPro, Insta360, DJI Action etc.)
Dog chest strap PULUZ for action cameras (GoPro, Insta360, DJI Action etc.)

Dog chest strap PULUZ for action cameras (GoPro, Insta360, DJI Action etc.) See the world from your pet's perspective. The Puluz PU156 mount allows you to attach your chosen action camera to your dog's chest or back - the first option is perfect for capturing playtime with a ball, while the second is ideal for activities like running or fetching. The accessory is designed to provide maximum comfort for your pet and is easy to clean - you don't have to worry if your four-legged friend gets it dirty! Mounting the camera on the product is exceptionally simple and quick, and the additional strap ensures the safety of your device. The mount is suitable for small, large, and medium-sized dogs (weighing from 7 kg to 54 kg). In the box Mount J-Hook Movable Base Long Screws x2 Brand Puluz Model PU156 Compatibility Action cameras, such as GoPro, Insta360, DJI Action Intended for Small, large, and medium-sized dogs (weighing from 7 kg to 54 kg)

Regular price: €14.50
Dolly Tripod for Neewer SW-600 Tripods, Size L
Dolly Tripod for Neewer SW-600 Tripods, Size L

Neewer SW-600 L-Size Tripod Dolly The Neewer SW-600 (Size L) is a practical tripod dolly designed for smooth and easy movement of photography tripods and lighting stands without the need for lifting. Featuring large 3-inch wheels, it ensures stable and quiet movement on hard surfaces, significantly streamlining workflow during photo shoots and video recordings. This model is particularly effective for heavy-duty setups, where quick repositioning without interrupting the shoot is essential. Stable Construction and Secure Mounting The dolly is equipped with adjustable clamps that lock onto tripod legs, ensuring a secure fit for various tripod and lighting stand models. Each wheel features an individual brake and rotation lock, providing maximum control over equipment positioning and maintaining a stable setup while filming or photographing. Metal wheels with ball bearings and a nylon surface ensure smooth gliding without the risk of damaging the floor. Adjustable Legs and Effortless Transport The adjustable leg length allows you to easily adapt the dolly to different tripod footprints, while the ability to lower the tripod's center of gravity increases flexibility for low-angle shots. Its foldable design ensures that the unit remains compact when not in use, making it easy to store and transport. An integrated carrying handle and an included transport bag make moving the equipment between locations effortless. Included TripodUser manual   Specifications ManufacturerNEEWERModelSW-600 LMaterialMetal, plasticWheel diameter7.6 cmAdjustable leg length27.4–40 cmFolded length45 cmMaximum load22.68 kgWheel typeMetal with ball bearings and nylon surfaceWheel lockYesAdjustable tripod leg clampsYesWeight2.72 kg

Regular price: €46.00
EMEET FTD603 Tripod
EMEET FTD603 Tripod

EMEET FTD603 Tripod The EMEET FTD603 tripod is an aluminum model designed for photography, video recording, live streaming, and content creation both indoors and outdoors. Its height can be adjusted to approximately 79 cm, 110 cm, and a maximum of 141 cm, making it easy to adjust the equipment setup to suit the type of shot you’re taking. When folded, the tripod is approximately 31.2 cm long, so it takes up very little space during storage and transport. Flexible camera and phone positioning The tripod head rotates 360°, making it easy to capture panoramas and smoothly change the frame’s direction without having to reposition the entire setup. The equipment can also be positioned vertically at a 90° angle, which is useful for taking portrait photos and recording content for social media. The tilt adjustment, meanwhile, allows you to comfortably take shots from higher and lower perspectives. Adjustable Height and Additional Stabilization The tripod legs are equipped with locks that allow you to quickly adjust its height and secure the selected setting. The dials on the head let you adjust its position to match the current shot, allowing you to switch efficiently between different shooting and filming modes. The lower part of the tripod also features a hook for an additional weight, which can help increase the tripod’s stability during use. For cameras, smartphones, and various applications The EMEET FTD603 is compatible not only with cameras but also with smartphones, action cameras, projectors, and small telescopes. The included phone mount allows you to use the tripod for video calls, live streams, recording vertical videos, or taking photos without having to hold the device in your hand. Its versatile design makes it ideal for outdoor photography, indoor shoots, interviews, presentations, and travel. Compact Design for Travel When you’re done using it, the tripod folds down to a length of about 31.2 cm, making it easy to transport along with the rest of your photography gear. The set includes a carrying case that makes storage easy and protects the tripod during transport. Mounting the phone holder is simple, and the adjustable parts of the tripod allow you to quickly set it up for your next shot. Included in the set EMEET FTD603 tripodPhone mountCarrying casePackaging   ManufacturerEMEETModelFTD603MaterialAluminumMaximum heightApprox. 141 cmOther working heightsApprox. 79 cm and 110 cmFolded lengthApprox. 31.2 cmHorizontal rotation of the head360°Vertical alignment90°Tilt angle adjustmentYesAbility to take shots from high and low anglesYesHook for additional weightYesAdjustable legs with locksYesCompatibilitycameras, smartphones, action cameras, projectors, and small telescopes

Regular price: €48.50
Expansion Protective Adapter PULUZ for OSMO Pocket 3
Expansion Protective Adapter PULUZ for OSMO Pocket 3

PULUZ Protective Expansion Adapter for OSMO Pocket 3 Discover the protective adapter for the Osmo Pocket 3, which combines durability, ease of use and versatility. Made of durable ABS material, it not only protects your device from mechanical damage, but also offers easy installation and removal. With two cold shoe holes and a ¼-inch screw hole, your camera becomes compatible with a variety of accessories, such as additional lighting or microphones. What's more, it also allows adaptation to tripods, mounts and selfie sticks. It is designed to transform into various forms of mounts, increasing functionality and customization to suit your needs. Durable ABS construction The Puluz protective adapter is designed for long-lasting use. Made of high-quality ABS material, it stands out for its durability and resistance to daily wear and tear, providing reliable protection for your device. It has been constructed in such a way that it will not interfere with the camera in any way, so that you can use all its functions without interference. Easy installation Forget about complicated installation processes and focus on creation! The Puluz protective adapter allows you to place the Osmo Pocket 3 camera in an instant and intuitive way, allowing for hassle-free installation and removal whenever needed. This way your camera is always ready for action, and you get more time to catch unforgettable moments! Functionality and compatibility The PULUZ adapter opens the door to new possibilities, equipping your Osmo Pocket 3 camera with additional cold shoe holes for accessories such as lights or microphones, and a 1/4-inch screw hole for easy connection to various accessories. Adapt your device to tripods, mounts, selfie sticks, and even to clips and specialty mounts - with the PULUZ adapter, your camera becomes as versatile as you need it to be! Straight frame x 1Movable base x 1Short screw x 1   ManufacturerPuluzModelPU899BMaterialABSCompatibilityDJI Osmo Pocket 3

Regular price: €4.00
Freewell Genius Rig iPhone 17 Pro Mount
Freewell Genius Rig iPhone 17 Pro Mount

Freewell Genius Rig Mount for iPhone 17 Pro The Freewell Genius Rig for iPhone 17 Pro is a professional camera rig designed for mobile content creators who want to expand the capabilities of their smartphone. The model features the SnapClamp quick-mount system, which allows you to attach your phone without tools, a magnetic slot for Freewell filters, and a 17 mm thread for mounting compatible lenses. The design offers 11 1/4" mounting threads, 4 cold shoes for attaching additional accessories, and modular TriGenius and MonoGenius grips with a Bluetooth remote control. Thanks to its lightweight aluminum construction, 360° rotating mounts, and versatility as a tripod, monopod, or selfie stick, the Genius Rig is ideal for vlogging, live streaming, recording content for YouTube and TikTok, and professional mobile productions. Quick setup and extensive expansion options The SnapClamp mechanism allows for instant and secure attachment of the iPhone 17 Pro, so setting up your rig takes just a moment. The sturdy construction, made of high-quality aluminum alloy and silicone components, ensures durability and a comfortable grip while filming. The cage is equipped with 11 1/4" mounting threads and 4 cold shoes, allowing you to simultaneously mount a microphone, LED light, viewfinder, or other accessories. Additionally, the magnetic slot for Freewell filters and the 17 mm thread allow you to use compatible filters and lenses, such as macro, telephoto, or anamorphic lenses, making it easy to adapt the setup to specific types of footage. Modular mounts for greater shooting flexibility The kit comes with two versatile mounts that can be used depending on your shooting style. The TriGenius serves as both an ergonomic grip and a compact tripod, and its 360° rotating joint makes it easy to change the frame without having to reattach your phone. MonoGenius can function as a mount, a monopod, or an extendable selfie stick up to 25 cm long, making it ideal for both recording on the go and taking group photos. The set includes a Bluetooth remote control powered by a replaceable CR1632 battery, which allows you to start and stop recording remotely from a distance of up to 10 meters, increasing comfort whether you’re working alone or during studio shoots. Lightweight design and well-thought-out dimensions Despite its extensive functionality, the Freewell Genius Rig remains comfortable for everyday use and easy to transport. The cage itself weighs 133 g, while the TriGenius mount weighs 239 g and the MonoGenius weighs 201 g, allowing you to choose the configuration that best suits your current needs. The width of the entire kit with the mounts attached is 321.3 mm, the height of the mounts is 136.3 mm, and the width of the cage itself is 183 mm. This keeps the system compact while offering stability and ease of use when recording footage in any conditions. Included Freewell Genius Rig cage for iPhone 17 ProTriGenius mountMonoGenius mountBluetooth remote control   ManufacturerFreewellModelGenius RigCompatibilityiPhone 17 ProMaterialaluminum alloy + siliconePhone mounting systemSnapClamp (tool-free)Filter MountFreewell magnetic slotLens Mount17 mm threadMount Rotation360°Number of Mounting Threads11 × 1/4"Number of Cold Shoes4Remote controlBluetoothBluetooth remote rangeup to 10 mRemote batteryCR1632 (replaceable)Extendable monopod lengthup to 25 cmCage weight133 gTriGenius mount weight239 gMonoGenius mount weight201 gWidth of the set with mounts321.3 mmHeight of the mounts136.3 mmCage width183 mm

Regular price: €122.00
Freewell Genius Rig Phone Mount for iPhone 17 Pro Max
Freewell Genius Rig Phone Mount for iPhone 17 Pro Max

Freewell Genius Rig Mount for iPhone 17 Pro Max The Freewell Genius Rig for iPhone 17 Pro Max is a professional camera rig designed for mobile content creators who want to expand the capabilities of their smartphone. The model features the SnapClamp quick-mount system, which allows you to attach your phone without tools, a magnetic slot for Freewell filters, and a 17 mm thread for mounting compatible lenses. The design offers 11 1/4" mounting threads, 4 cold shoes for attaching additional accessories, and modular TriGenius and MonoGenius grips with a Bluetooth remote control. Thanks to its lightweight aluminum construction, 360° rotating mounts, and versatility as a tripod, monopod, or selfie stick, the Genius Rig is ideal for vlogging, live streaming, recording content for YouTube and TikTok, and professional mobile productions. Quick setup and extensive expansion options The SnapClamp mechanism allows for instant and secure attachment of the iPhone 17 Pro Max, so setting up your rig takes just a moment. The sturdy construction, made of high-quality aluminum alloy and silicone components, ensures durability and a comfortable grip while filming. The cage is equipped with 11 1/4" mounting threads and 4 cold shoes, allowing you to simultaneously mount a microphone, LED light, viewfinder, or other accessories. Additionally, the magnetic slot for Freewell filters and the 17 mm thread allow you to use compatible filters and lenses, such as macro, telephoto, or anamorphic lenses, making it easy to adapt the setup to specific types of shoots. Modular mounts for greater shooting flexibility The kit comes with two versatile mounts that can be used depending on your shooting style. The TriGenius serves as both an ergonomic grip and a compact tripod, and its 360° rotating joint makes it easy to change the frame without having to reattach your phone. MonoGenius can function as a mount, a monopod, or an extendable selfie stick up to 25 cm long, making it ideal for both recording on the go and taking group photos. The set includes a Bluetooth remote control powered by a replaceable CR1632 battery, which allows you to start and stop recording remotely from a distance of up to 10 meters, increasing comfort whether you’re working alone or in a studio setting. Lightweight design and well-thought-out dimensions Despite its extensive functionality, the Freewell Genius Rig remains comfortable for everyday use and easy to transport. The cage itself weighs 133 g, while the TriGenius mount weighs 239 g and the MonoGenius weighs 201 g, allowing you to choose the configuration that best suits your current needs. The width of the entire kit with the mounts attached is 321.3 mm, the height of the mounts is 136.3 mm, and the width of the cage itself is 183 mm. This keeps the system compact while offering stability and ease of use when recording footage in any conditions. Included Freewell Genius Rig cage for iPhone 17 Pro MaxTriGenius HandleMonoGenius HandleBluetooth Remote Control   ManufacturerFreewellModelGenius RigCompatibilityiPhone 17 Pro MaxMaterialaluminum alloy + siliconePhone Mounting SystemSnapClamp (tool-free)Filter MountFreewell magnetic slotLens Mount17 mm threadHandle Rotation360°Number of Mounting Threads11 × 1/4"Number of Cold Shoes4Remote controlBluetoothBluetooth remote rangeup to 10 mRemote batteryCR1632 (replaceable)Extendable monopod lengthup to 25 cmCage weight133 gTriGenius mount weight239 gMonoGenius mount weight201 gWidth of the set with mounts321.3 mmHeight of the mounts136.3 mmCage width183 mm

Regular price: €122.00
GODOX 240F Lighting Tripod
GODOX 240F Lighting Tripod

GODOX 240F Lighting Stand The Godox 240F lighting stand features a lightweight yet durable design made of high-quality aluminum, making it ideal for both studio and outdoor shoots. It offers height adjustment ranging from 68 to 240 cm, allowing you to easily adjust the lamp’s position to suit the nature of the scene you’re photographing or filming. With a maximum load capacity of 2 kg, you can safely use a wide variety of lightweight lighting equipment and accessories. Convenient Adjustment and Stable Construction The tripod is equipped with large knobs that allow for quick and comfortable height adjustment. Smooth-operating screws facilitate precise adjustment, ensuring a comfortable workflow even during frequent changes to the lighting setup. The rigid construction ensures high stability while remaining lightweight, making the tripod easy to carry and transport. Versatile Mounting for Various Lights The Godox 240F is equipped with a 5/8" spigot with a 1/4" external thread, ensuring broad compatibility with many lights and lighting accessories. This is a practical solution for photographers, videographers, and content creators looking for a reliable tripod that combines portability, durability, and ease of use in their daily work. Included tripodspigotuser manual   ManufacturerGodoxModel240FColorBlackHeight68–240 cmLoad capacity2 kgSpigot5/8"Thread1/4"

Regular price: €48.50
GODOX AD-B2 S Double Mount
GODOX AD-B2 S Double Mount

GODOX AD-B2 S Dual Head for AD200 Flashes The GODOX AD-B2 S Dual Head allows you to combine two GODOX AD200 flashes into a single, powerful 400 W setup. This allows you to achieve greater flash power without having to use two separately positioned light sources, making it easier to light larger photo sets and work with complex light modifiers. An additional advantage is the 2 × 20 W LED modeling light, which allows you to conveniently assess the lighting effect before taking the photo. Greater convenience during every session The 2 × 20 W LED modeling light makes it easier to set up the lighting and fine-tune the composition, making session preparation run more smoothly. There’s no need to use two separate studio lights to enjoy the benefits of efficient modeling light. It’s a practical solution that streamlines your work both in the studio and when shooting outdoors. Stable Mounting and Flexibility in Positioning The head is equipped with a lighting stand mount featuring a 5/8" spigot and a tilt lock. This design allows you to conveniently mount the setup and precisely adjust the light direction, ensuring stability and comfort during various types of photo sessions.   ManufacturerGODOXModelAD-B2CompatibilityGODOX AD200 flashPower when two flashes are combined400 WsLED modeling light2 × 20 WTripod mount5/8" spigot socket

Regular price: €65.50
GODOX BW-AD400Pro Mount
GODOX BW-AD400Pro Mount

Bowens Adapter for the GODOX BW-AD400Pro Flash This adapter allows you to equip the GODOX AD400Pro flash with the popular Bowens mount, giving you access to a wide variety of light modifiers—both from GODOX and many other manufacturers that use this standard. This allows you to freely adapt softboxes, reflectors, and other accessories to the nature of your shoot and more easily achieve your desired lighting effect. This is a practical solution for photographers and videographers who want to expand the capabilities of their kit without having to replace their existing light modifiers. The adapter is also compatible with the GODOX AD300Pro flash when used with the Godox AD-AB adapter, providing even greater flexibility when working in the studio and on location.   ManufacturerGODOXModelBW-AD400ProMount TypeBowensCompatibilityGODOX AD400ProAdditional CompatibilityGODOX AD300Pro (requires the Godox AD-AB adapter)Intended UseAllows the use of Bowens-mount light modifiers, including products from GODOX and other manufacturers

Regular price: €18.50
GODOX LSA-17 Rights
GODOX LSA-17 Rights

GODOX LSA-17 Hook The Godox LSA-17 is a versatile U-shaped bracket designed for use in photography, videography, and studio work. The integrated Allen screw allows the bracket to be attached to various models of Super Clamp-type clamps. The accessory can be mounted on a tripod or stand and used, among other things, to organize cables, ensuring they don’t get in the way while working and making it easier to keep your workspace tidy. More Applications The design of the Godox LSA-17 allows it to be used for more than just cable management. With the addition of a hook, the clamps can support a tube or pole, creating a practical solution for hanging a roll of paper backdrop. This is particularly useful in photography and film studios, where the ability to conveniently arrange equipment makes it easier to set up the scene for subsequent shots. A Useful Studio Accessory Its simple design and versatility make the Godox LSA-17 a practical addition to the gear of any photographer, filmmaker, or studio. It helps organize cables and, when configured properly, also secures the components needed to hang a backdrop, allowing for better use of available tripods and mounting accessories.   ManufacturerGodoxModelLSA-17Product Typemounting bracketDesignU-shapedMountingintegrated Allen screwCompatibilitySuper Clamp-type clampsApplicationorganizing and routing cables, supporting tubes or rodsIntended Usephotography, video, studio, stage

Regular price: €12.00