Skip to main content Skip to search Skip to main navigation
SMART CHOICES. SIMPLY SORTED.

For cameras and camcorders

For cameras and camcorders

The for cameras and camcorders category at That’s Easy brings the relevant products together in one place.

Compatible accessories add functions to existing equipment or support replacement and maintenance. They help keep a setup practical for its intended task. Exact connections and versions determine which equipment the product works with.

For cameras and camcorders at That’s Easy

The range of for cameras and camcorders brings different versions together. Product information describes the functions and supplied components of each model.

Filter products
Accessory set Puluz for DJI Osmo Pocket 4 4-in-1
Accessory set Puluz for DJI Osmo Pocket 4 4-in-1

Puluz Accessory Kit for the DJI Osmo Pocket 4 Keep your DJI Osmo Pocket 4 camera safe with the Puluz PU1109B protective accessory kit. The set includes silicone covers for the body, lens, swivel screen, and a 1/4-inch threaded mount, as well as a lanyard to prevent loss. The accessories are made of flexible, eco-friendly, food-grade silicone and TPU, which provide effective protection against drops, impacts, and scratches. Thanks to the form-fitting design, you can use the camera without restricting access to its key features. Comprehensive protection in every situation Each piece in the set protects a specific part of the camera, helping to safeguard sensitive components from accidental damage. Separate covers protect the lens on the gimbal, the swivel screen, the body, and the 1/4-inch threaded mount, and their flexible design fits snugly around the device. The material is highly elastic, so it does not deform under compression, and it is also water- and dirt-resistant. This practical solution helps keep your camera in good condition during daily use, storage, and transport. A Secure Grip and Comfortable Handling Puluz accessories not only protect the camera but also enhance the comfort of use. The soft, silky-smooth surface with a subtle matte texture is pleasant to the touch, while its non-slip properties and sweat resistance ensure a stable grip even during extended recording sessions. Precisely cut-out openings allow easy access to the microphones, buttons, controls, USB-C port, and lanyard loops, ensuring the covers do not interfere with normal device operation. Included Lens protection coverSafety lanyardScreen protection coverProtective cover for the grip with a 1/4-inch threadBody protection coverDocumentation   ManufacturerPuluzModelPU1109BTypeProtective accessory kitCompatibilityDJI Osmo Pocket 4MaterialFood-grade silicone, TPUColorPurpleMaterial propertiesFlexible, water-resistant, stain-resistant, and resistant to deformationProtective featuresProtection against drops, impacts, and scratchesSurface finishMatte, non-slip, sweat-resistantGross weightApprox. 70 g

Regular price: €9.50
Adapter ring Freewell Brandon Li 58mm
Adapter ring Freewell Brandon Li 58mm

Freewell Brandon Li 58 mm Adaptor Ring The Freewell Brandon Li 58 mm Adaptor Ring is a base component designed for the Brandon Li x Freewell VND/CPL Basic & Pro Kit filter system. It allows you to mount the VND/CPL system on a lens with a 58 mm thread, providing a stable base and a secure fit for the filter. The ring has an outer diameter of 91.8 mm, is 4.95 mm thick, and weighs 23.5 g, so it does not add significant weight to your photography or video setup. A Stable Base for the VND/CPL Filter The Base Ring ensures a stable connection between the lens and a compatible Brandon Li x Freewell filter system. Once screwed onto the lens thread, it creates a solid base onto which a VND/CPL filter can be attached. This allows you to conveniently set up your equipment for recording or photography and use filters without the need for additional, haphazardly chosen adapters. Magnetic Mounting of Additional Filters The system’s design also allows for the use of compatible magnetically attached filters, such as the ND32 or Black Glow Mist 1/4. The magnetic mounting system makes it easy to quickly change the configuration depending on lighting conditions or the desired image effect. This allows you to efficiently add more system components without having to spend time screwing on filters each time.   ManufacturerFreewellModelFW-BL-SU58Product TypeBase ringLens Thread Size58 mmOuter Diameter91.8 mmThickness4.95 mmWeight22.6 gCompatibilityBrandon Li x Freewell VND/CPL Basic & Pro Kit

Regular price: €26.50
Adapter ring Freewell Brandon Li 62mm
Adapter ring Freewell Brandon Li 62mm

Freewell Brandon Li 62 mm Adapter Ring The Freewell Brandon Li 62 mm Adapter Ring is a base component designed for the Brandon Li x Freewell VND/CPL Basic & Pro Kit filter system. It allows you to mount the VND/CPL system on a lens with a 62 mm thread, providing a stable base and a secure fit for the filter. The ring has an outer diameter of 91.8 mm, is 4.95 mm thick, and weighs 21.4 g, so it does not add significant weight to your photography or videography setup. A Stable Base for the VND/CPL Filter The Base Ring ensures a stable connection between the lens and a compatible Brandon Li x Freewell filter system. Once screwed onto the lens thread, it creates a solid base onto which you can mount a VND/CPL filter. This allows you to conveniently set up your equipment for recording or photography and use filters without the need for additional, haphazardly chosen adapters. Magnetic Mounting of Additional Filters The system’s design also allows for the use of compatible magnetic-mount filters, such as the ND32 or Black Glow Mist 1/4. The magnetic mounting system makes it easy to quickly change the configuration depending on lighting conditions or the desired image effect. This allows you to efficiently add additional system components without having to spend time screwing on filters each time.   ManufacturerFreewellModelFW-BL-SU62Product TypeBase ringLens Thread Size62 mmOuter Diameter91.8 mmThickness4.95 mmWeight21.4 gCompatibilityBrandon Li x Freewell VND/CPL Basic & Pro Kit

Regular price: €26.50
Adapter ring Freewell Brandon Li 67mm
Adapter ring Freewell Brandon Li 67mm

Freewell Brandon Li 67mm Adapter Ring The Freewell Brandon Li 67 mm adapter ring is a base component designed for the Brandon Li x Freewell VND/CPL Basic & Pro Kit filter system. It allows you to mount the VND/CPL system on a lens with a 67 mm thread, providing a stable base and a secure fit for the filter. The ring has an outer diameter of 91.8 mm, is 4.95 mm thick, and weighs 19.7 g, so it does not add significant weight to your photography or videography setup. A Stable Base for the VND/CPL Filter The Base Ring ensures a stable connection between the lens and a compatible Brandon Li x Freewell filter system. Once screwed onto the lens thread, it creates a solid base onto which a VND/CPL filter can be mounted. This allows you to conveniently set up your equipment for recording or photography and use filters without the need for additional, haphazardly chosen adapters. Magnetic Mounting of Additional Filters The system’s design also allows for the use of compatible magnetically attached filters, such as the ND32 or Black Glow Mist 1/4. The magnetic mounting method makes it easy to quickly change the configuration depending on lighting conditions or the desired image effect. This allows you to efficiently add more system components without having to spend time screwing on filters each time.   ManufacturerFreewellModelFW-BL-SU67Product TypeBase ringLens Thread Size67 mmOuter Diameter91.8 mmThickness4.95 mmWeight19.7 gCompatibilityBrandon Li x Freewell VND/CPL Basic & Pro Kit

Regular price: €29.00
Adapter ring Freewell Brandon Li 72mm
Adapter ring Freewell Brandon Li 72mm

Freewell Brandon Li 72mm Adapter Ring The Freewell Brandon Li 72mm Adapter Ring is a base component designed for the Brandon Li x Freewell VND/CPL Basic & Pro Kit filter system. It allows you to mount the VND/CPL system on a lens with a 72 mm thread, providing a stable base and a secure fit for the filter. The ring has an outer diameter of 91.8 mm, is 4.95 mm thick, and weighs 17.8 g, so it does not add significant weight to your photography or videography setup. A Stable Base for VND/CPL Filters The Base Ring ensures a stable connection between the lens and a compatible Brandon Li x Freewell filter system. Once screwed onto the lens thread, it creates a solid base onto which a VND/CPL filter can be mounted. This allows you to conveniently set up your equipment for recording or photography and use filters without the need for additional, haphazardly chosen adapters. Magnetic Mounting of Additional Filters The system’s design also allows for the use of compatible magnetically mounted filters, such as the ND32 or Black Glow Mist 1/4. The magnetic mounting system makes it easy to quickly change the configuration depending on lighting conditions or the desired image effect. This allows you to efficiently add additional system components without having to spend time screwing on filters each time.   ManufacturerFreewellModelFW-BL-SU72Product TypeBase RingLens Thread Size72 mmOuter Diameter91.8 mmThickness4.95 mmWeight17.8 gCompatibilityBrandon Li x Freewell VND/CPL Basic & Pro Kit

Regular price: €26.50
Adapter ring Freewell Brandon Li 77mm
Adapter ring Freewell Brandon Li 77mm

Freewell Brandon Li 77 mm Adapter Ring The Freewell Brandon Li 77 mm adapter ring is a base component designed for the Brandon Li x Freewell VND/CPL Basic & Pro Kit filter system. It allows you to mount the VND/CPL system on a lens with a 77 mm thread, providing a stable base and a secure fit for the filter. The ring has an outer diameter of 91.8 mm, is 4.95 mm thick, and weighs 15.8 g, so it doesn’t add much weight to your photography or video setup. A Stable Base for VND/CPL Filters The Base Ring ensures a stable connection between the lens and a compatible Brandon Li x Freewell filter system. Once screwed onto the lens thread, it creates a solid base onto which a VND/CPL filter can be mounted. This allows you to conveniently set up your equipment for filming or photography and use filters without the need for additional, haphazardly chosen adapters. Magnetic Mounting of Additional Filters The system’s design also allows for the use of compatible magnetically attached filters, such as the ND32 or Black Glow Mist 1/4. The magnetic mounting system makes it easy to quickly change the configuration depending on lighting conditions or the desired image effect. This allows you to efficiently add more system components without having to spend time screwing on filters each time.   ManufacturerFreewellModelFW-BL-SU77Product TypeBase ringLens Thread Size77 mmOuter Diameter91.8 mmThickness4.95 mmWeight15.8 gCompatibilityBrandon Li x Freewell VND/CPL Basic & Pro Kit

Regular price: €29.00
Adapter ring Freewell Brandon Li 82mm
Adapter ring Freewell Brandon Li 82mm

Freewell Brandon Li 82 mm Adapter Ring The Freewell Brandon Li 82 mm adapter ring is a base component designed for the Brandon Li x Freewell VND/CPL Basic & Pro Kit filter system. It allows you to mount the VND/CPL system on a lens with an 82 mm thread, providing a stable base and a secure fit for the filter. The ring has an outer diameter of 91.8 mm, is 4.95 mm thick, and weighs 13.7 g, so it does not add significant weight to your photography or videography setup. A Stable Base for the VND/CPL Filter The Base Ring ensures a stable connection between the lens and a compatible Brandon Li x Freewell filter system. Once screwed onto the lens thread, it creates a solid base onto which a VND/CPL filter can be mounted. This allows you to conveniently set up your equipment for recording or photography and use filters without the need for additional, randomly selected adapters. Magnetic Mounting of Additional Filters The system’s design also allows for the use of compatible magnetically mounted filters, such as the ND32 or Black Glow Mist 1/4. The magnetic mounting system makes it easy to quickly change the configuration depending on lighting conditions or the desired image effect. This allows you to efficiently add more system components without having to spend time screwing on filters each time.   ManufacturerFreewellModelFW-BL-SU82Product TypeBase RingLens Thread Size82 mmOuter Diameter91.8 mmThickness4.95 mmWeight13.7 gCompatibilityBrandon Li x Freewell VND/CPL Basic & Pro Kit

Regular price: €26.50
Adapter ring Freewell Brandon Li 86mm
Adapter ring Freewell Brandon Li 86mm

Freewell Brandon Li 86mm Adapter Ring The Freewell Brandon Li 86mm adapter ring is a base ring designed for the Brandon Li x Freewell VND/CPL Cine and Cine Pro kits in the 86mm size. Its purpose is to provide a stable base for the VND/CPL filter and keep it in the correct position during use. The ring has an outer diameter of 104.9 mm, a thickness of 4.8 mm, and weighs approximately 20.6 g, making it a compact component of the entire filter system. Stable Mounting of the VND/CPL Filter The base ring allows you to securely mount a compatible VND/CPL filter from the Brandon Li x Freewell system. The precise fit of the components ensures a stable connection, making it easier to use filters while filming and adjusting camera settings. This applies, among others, to filters such as the ND32 or Black Glow Mist 1/4, which can be attached as part of the complete filter system. This solution streamlines configuration changes during recording and allows you to adapt the setup to various lighting conditions or the desired visual effect. A component designed specifically for the Brandon Li x Freewell system The ring is designed exclusively for use with the Brandon Li x Freewell VND/CPL Cine and Cine Pro kits. Its dedicated design allows the ring to serve as a proper base for the VND/CPL filter and other compatible system components.   ManufacturerFreewellModelFW-BL-SU86Typebase ringSize86 mmOuter diameter104.9 mmThickness4.8 mmWeight20.6 gCompatibilityBrandon Li x Freewell Cine Kit and Cine Pro Kit

Regular price: €26.50
Adapter ring Freewell Brandon Li 95mm
Adapter ring Freewell Brandon Li 95mm

Freewell Brandon Li 95 mm Adapter Ring The Freewell Brandon Li 95 mm adapter ring is a base ring designed for the Brandon Li x Freewell VND/CPL Cine and Cine Pro kits in the 95 mm size. Its purpose is to provide a stable base for the VND/CPL filter and keep it in the correct position during use. The ring has an outer diameter of 104.9 mm, a thickness of 4.8 mm, and a weight of 15.6 g, making it a compact component of the entire filter system. Stable Mounting of the VND/CPL Filter The base ring allows you to securely mount a compatible VND/CPL filter from the Brandon Li x Freewell system. The precise fit of the components ensures a stable connection, making it easier to use the filters while filming and adjusting camera settings. This applies, among others, to filters such as the ND32 or Black Glow Mist 1/4, which can be attached as part of the complete filter system. This solution streamlines configuration changes during recording and allows you to adapt the setup to different lighting conditions or the desired visual effect. A component designed specifically for the Brandon Li x Freewell system The ring is designed exclusively for use with the Brandon Li x Freewell VND/CPL Cine and Cine Pro kits. Its dedicated design allows the ring to serve as a proper base for the VND/CPL filter and other compatible system components.   ManufacturerFreewellModelFW-BL-SU95Typebase ringSize95 mmOuter diameter104.9 mmThickness4.8 mmWeight15.6 gCompatibilityBrandon Li x Freewell Cine Kit and Cine Pro Kit

Regular price: €26.50
Battery charger SMALLRIG LP-E6NH
Battery charger SMALLRIG LP-E6NH

SMALLRIG LP-E6NH Battery Charger The SmallRig LP-E6NH Camera Battery and Charger Kit 3821 is a set consisting of two LP-E6NH lithium-ion batteries, each with a capacity of 2040 mAh, and a dual charger. Each battery has a voltage of 7.2 V and an energy capacity of 14.69 Wh, and the built-in decoding circuit ensures proper operation with compatible cameras without displaying unwanted error messages. The charger allows you to recharge both batteries simultaneously, and the built-in LCD screen displays voltage, current, and the recharged capacity. Compatibility with Canon Cameras SmallRig batteries have the same dimensions as the original batteries of this type, so they fit properly into the camera’s battery compartment. The kit is compatible with, among others, the following Canon models: EOS 5D Mark II, 5D Mark III, 5D Mark IV, 6D, 6D Mark II, 7D, 7D Mark II, 60D, 60Da, 70D, 80D, 90D, XC10, XC15, 5DS, 5DSR, R, R5, R6, R5C, R7, and R6 Mark II. The list of compatible models is more extensive, so before purchasing, it’s worth checking whether the specific device uses LP-E6NH batteries. The kit is not compatible with the Canon EOS R5 Mark II. Charging Two Batteries Simultaneously The dual charger allows you to charge two batteries simultaneously, enabling you to prepare backup power sources more quickly before shooting or recording. Its output is 8.4 V / 1000 mA whether charging one or two batteries. The LCD screen lets you monitor the voltage, current, and amount of energy supplied in real time, making it easier to control the charging process. Compact and Durable Design The battery casings are made of ABS and PC plastics, and their matte finish ensures a comfortable grip and increases durability during everyday use. A single battery measures approximately 56.7 × 38.4 × 21 mm and weighs about 78 g, while the charger measures 90 × 56 × 27 mm and weighs approximately 65 g. Its compact size makes it easy to store the set in a camera bag or backpack, keeping a power reserve on hand while working in the field. Included in the set LP-E6NH battery x 2Battery protective cover x 2Dual charger with built-in USB-A cableUser manual   ManufacturerSmallRigModel3821Battery typeLithium-ionBattery modelLP-E6NHBattery capacity2040 mAhBattery voltage7.2 VEnergy14.69 WhMaximum battery charging voltage8.4 VUSB-C input5 V / 2.1 A min.USB-A input5 V / 2.1 A min.Charger Output with One Battery8.4 V / 1000 mACharger Output with Two Batteries8.4 V / 1000 mAOperating Temperature0°C–40°CDimensions of a single battery56.7 × 38.4 × 21 mmCharger dimensions90 × 56 × 27 mmWeight of a single batteryapprox. 78 gCharger weightapprox. 65 gMaterialABS + PCCompatibilitydevices that use LP-E6NH batteries

Regular price: €46.00
Battery charger SMALLRIG NP-F970
Battery charger SMALLRIG NP-F970

SMALLRIG NP-F970 Battery Charger The SMALLRIG NP-F970 3823 is a kit consisting of two NP-F970 lithium-ion batteries, each with a capacity of 7,800 mAh, a dual charger with an LCD screen, and a USB-A to USB-C cable. The batteries offer a voltage of 7.2 V and a capacity of 56.16 Wh, and thanks to full decoding, they are compatible with Sony cameras, LED lights, monitors, and other devices that use NP-F series batteries. The charger allows you to recharge both batteries simultaneously, and the USB-C and Micro-USB ports enable you to use various power sources. 7,800 mAh Capacity – Longer Runtime Each of the two NP-F970 batteries has a capacity of 7,800 mAh, which is ideal for longer video shoots, work on a film set, or when using additional lighting. The higher capacity means you can power compatible equipment for longer without having to frequently swap out the power source. The batteries use lithium-ion technology, offer a voltage of 7.2 V and energy capacity of 56.16 Wh, while their maximum charging voltage is 8.4 V. Full decoding and broad compatibility The built-in chip ensures full decoding of the batteries, allowing them to work with compatible devices and original chargers without triggering “unsupported battery” error messages. The batteries have the standard NP-F970 dimensions, so they fit into the battery compartments of devices compatible with this battery type. They can power, among other things, select Sony video cameras, monitors, LED lights, and motorized sliders compatible with NP-F batteries. Charging Two Batteries Simultaneously The dual charger allows you to charge two batteries at the same time, making it more convenient to prepare a power supply before recording. When powered by 9 V, the output current is 1500 mA when charging a single battery and 1000 mA per channel when charging two batteries. The built-in LCD screen displays the charging status of both batteries. USB-C and Micro-USB – Multiple Power Options The charger is equipped with USB-C and Micro-USB inputs, allowing it to be powered using a compatible USB adapter, power bank, or car charger. It supports 5 V / 2.4 A and 9 V / 2 A inputs; for optimal charging performance, we recommend using a 9 V / 2 A power adapter. Do not use the USB-C and Micro-USB inputs simultaneously, and the power adapter is not included in the package. Compact Dimensions and Durable Housing A single battery measures approximately 7.1 × 3.9 × 6.0 cm and weighs 313 g, while the charger measures approximately 12.5 × 5.5 × 1.8 cm and weighs 60 g. The charger’s slim profile and light weight make it easy to store and transport along with other video equipment accessories. The battery casings are made of a flame-retardant blend of ABS and PC materials, and their matte finish provides a surface that is pleasant to the touch and increases durability during regular use. Included NP-F970 7800 mAh battery x 2Battery protective cover x 2Dual charger0.6 m USB-A to USB-C cableUser manual   ManufacturerSMALLRIGModel3823Battery typeLithium-ionBattery modelNP-F970Single Battery Capacity7,800 mAhBattery Voltage7.2 VEnergy56.16 WhMaximum Battery Charging Voltage8.4 VNumber of Charging Slots2Charger InputsUSB-C, Micro-USBUSB-C Input Specifications5 V / 2.4 A or 9 V / 2 AMicro-USB Input Specifications5 V / 2.4 A or 9 V / 2 AOutput at 5 V input, one battery8.4 V / 1000 mAOutput at 5 V input, two batteries8.4 V / 700 mAOutput with 9 V power supply, one battery8.4 V / 1,500 mAOutput with 9 V power supply, two batteries8.4 V / 1,000 mADisplayLCDCompatible batteriesSony NP-F550, NP-F570, NP-F730, NP-F750, NP-F770, NP-F930, NP-F950, NP-F960, NP-F970Operating temperature0°C to 40°CMaterialABS + PCDimensions of a single battery7.1 × 3.9 × 6.0 cmWeight of a single batteryapprox. 313 gCharger dimensions12.5 × 5.5 × 1.8 cmCharger weightapprox. 60 g

Regular price: €63.00
Battery charger SMALLRIG NP-F970
Battery charger SMALLRIG NP-F970

SMALLRIG NP-F970 Battery Charger The set includes the SMALLRIG NP-F970 4834 four-channel battery charger, designed for fast and convenient charging of NP-F series batteries; it is compatible with the NP-F550, NP-F570, NP-F750, and NP-F970. The device supports USB-C Power Delivery up to 100 W and allows you to charge four batteries simultaneously. The set also includes four NP-F970 batteries, each with a capacity of 7,800 mAh and energy of 56.16 Wh, a 100 W USB-C to USB-C cable, and the necessary documentation. This solution is particularly useful when working with cameras, monitor screens, panel lights, or video transmitters, where having several fully charged batteries on hand helps minimize interruptions in recording. Four Channels with Automatic Charging Adjustment Each of the four channels can operate at a power level adjusted to the detected battery model, with available output parameters of 8.4 V at 0.9 A, 1.8 A, or 2.5 A. The charger automatically selects the appropriate current based on the type of battery inserted, making it easy to charge different models from the NP-F family simultaneously. The maximum USB-C power output is 100 W at up to 20 V / 5 A; therefore, to achieve high performance, it is recommended to use a USB-C power adapter with a power rating of at least 80 W. The design also features short-circuit and overcurrent protection for each port, enhancing safety during extended charging sessions. Easy-to-read OLED screen with parameter display The built-in OLED screen allows you to check the charging status of each of the four batteries in real time without the need for additional devices. With a short press of a button, you can toggle between information on the battery level and voltage of individual channels, USB-C input parameters, and operating temperature. The display shows, among other things, voltage, current, power, and temperature, making it easier to monitor the entire charging process. Holding the button down longer also displays information about the device model, specifications, and version. Included in the set NP-F 4-Channel ChargerNP-F970 7800 mAh battery x 4100 W USB-C to USB-C cableUser manualWarranty card   ManufacturerSmallRigModel4834Compatible batteriesNP-F550, NP-F570, NP-F750, NP-F970Number of charging channels4Maximum input power100 WUSB-C input12 V / 3 A, 15 V / 3 A, 20 V / 5 ASupported USB-C protocolPower Delivery (PD)Output specifications per channel8.4 V / 0.9 A, 8.4 V / 1.8 A, 8.4 V / 2.5 AMaximum charging voltage8.45 VBattery type includedLithium-ionCapacity of a single battery7,800 mAhBattery voltage7.2 VBattery energy56.16 WhDisplayOLEDSafety featuresShort-circuit and overcurrent protectionOperating temperature during charging5°C to 45°CMaterialABS + PCProduct dimensions155 × 135 × 35.1 mmProduct weight1,571.5 ± 20 gApplicationscameras, monitors, panel lights, video transmitters, and other devices compatible with NP-F batteries

Regular price: €188.00
Battery plate kit SMALLRIG 4064B V-Mount
Battery plate kit SMALLRIG 4064B V-Mount

SMALLRIG 4064B V-Mount Plate Kit The SmallRig 4064B is a compact, lightweight, and fully modular V-Mount battery mounting kit designed for convenient use on the go. The kit includes a V-Mount battery plate, an Arca-Swiss quick-release plate, and a rear V-Mount plate, which together form a complete, versatile power solution. The base is extendable, making it compatible with mirrorless and DSLR cameras of various sizes, including models such as the Sony Alpha 7R V, Canon EOS R5C, and Panasonic LUMIX S5 II. The entire structure is made of aluminum alloy and stainless steel, ensuring durability while maintaining a low weight of just 258 g. Tool-Free Installation The kit features a quick-mount system that requires no additional tools. Installation and adjustment are quick and intuitive, which significantly streamlines work on set. Thanks to the Arca-Swiss plate, the device can be directly attached to cameras equipped with an Arca-type mount and to gimbals from the DJI RS series. The built-in 1/4"-20 threaded holes and V-Mount plate open up additional power options when connecting accessories such as the Battery Adapter Plate Professional Edition 3168 or the BUB2336 power bank holder. Quick Mode Switching The detachable Arca plate on the bottom of the kit allows you to instantly switch between handheld and tripod use. It is fully compatible and interchangeable with other quick-release plates, which increases flexibility in various shooting scenarios. This design allows the operator to adapt their workflow to current needs without wasting time on complicated equipment setups. Convenient Access to the Screen and Compact Storage The V-Mount battery plate features a swivel design that allows it to tilt 90° backward, facilitating access to the camera screen. The built-in damping mechanism prevents the device from accidentally falling during adjustment. Additionally, the V-Mount plate is designed with a foldable structure, which significantly increases its compactness and makes storage and transport easier. Included in the set V-Mount battery plateArca-Swiss quick-release plateRear V-Mount plate   ManufacturerSmallRigModel4064BProduct dimensions113.5 x 91.5 x 41.8 mmProduct weight258.0 ± 5 gMaterialaluminum alloy, stainless steelLoad capacity5 kg

Regular price: €97.50
Battery plate SMALLRIG 3016 V-Mount 15mm
Battery plate SMALLRIG 3016 V-Mount 15mm

SMALLRIG 3016 V-Mount 15mm Battery Plate The SMALLRIG 3016 is a V-Mount battery plate designed to mount most popular V-Mount batteries in camera rigs. The set includes a dual clamp for 15 mm rods, allowing the plate to be easily mounted in a 15 mm LWS system and adjusted to fit the rig’s configuration. The design is compatible with the Blackmagic URSA Mini camera, among others, and numerous mounting holes allow for the attachment of additional accessories. The plate serves solely as a battery mount and does not have its own power ports. Secure V-Mount Battery Mount The standard V-Mount allows the plate to be used with most V-Mount batteries, enabling it to become part of an expanded power system for the camera and additional equipment. Two special stops help prevent the mounted battery from rotating during operation or when the rig is repositioned. This solution increases the stability of the entire setup, especially when filming with larger rigs. Please note that the plate is not compatible with PAGlink V-Mount batteries or the Patona Premium BP-190WS battery. Flexible mounting on 15 mm rods The included dual 15 mm clamp allows the plate to be mounted on standard LWS system rods in various configurations. This enables you to position the battery in a convenient spot, depending on the camera rig’s design and the number of accessories used. The plate itself features 1/4"-20, M3, M4, and ARRI 3/8"-16 holes and threads, so you can attach clamps, magic arms, and other equipment to it. The extensive set of mounting points also makes it easy to modify the rig’s configuration later on. Aluminum Construction and Compact Dimensions The plate is made of aluminum alloy, which ensures a rigid structure while keeping the weight relatively low at approximately 190 g. Its dimensions are 132.5 × 108 × 17 mm, so it doesn’t take up much space in the setup and can be conveniently used even in more compact configurations. In addition to the plate, the set includes a double clamp for 15 mm rods, Allen wrenches, and a set of screws needed for assembly. Included in the set V-Mount battery plateDouble clamp for 15 mm rodsAllen wrenches x 3Short 1/4"-20 screw x 4Long 1/4"-20 screw x 2M4 x 4 screwM3 x 4 screw   ManufacturerSMALLRIGModel3016TypeV-Mount battery plateMounting systemV-MountRig mountingdouble clamp for 15 mm rodsRod standard15 mm LWSMounting holes1/4"-20Mounting holesM3Mounting holesM4Mounting threads1/4"-20Mounting threadsM4ARRI thread3/8"-16Compatibilitymost V-Mount batteriesMaterialaluminum alloyProduct dimensions132.5 × 108 × 17 mmWeight190 gBuilt-in power portsNoMale V-Lock connector includedNoIncompatible withPAGlink V-Mount batteries and Patona Premium BP-190WS

Regular price: €41.50
Battery SMALLRIG VB50 mini V-Mount 3579B
Battery SMALLRIG VB50 mini V-Mount 3579B

SMALLRIG VB50 mini V-Mount Battery 3579B The SMALLRIG VB50 mini V-Mount Battery 3579B provides a convenient power source for photography and film equipment. Thanks to its variety of ports, it allows you to connect multiple devices simultaneously, such as cameras, monitor screens, video transmitters, and lighting. The intelligent BMS system ensures stable and safe operation, while the USB-C PD fast-charging technology with up to 45 W of power allows you to fully recharge the battery in just 1.5 hours. The easy-to-read OLED display makes it simple to monitor the battery status, while the durable housing and compact size make the VB50 ideal for both studio and on-location shoots. High-Performance Cells, Stable Power Supply The SMALLRIG VB50 battery uses high-quality LG 18650 MJ1 lithium-ion cells, each with a capacity of 3,500 mAh. These cells ensure high performance during charging and discharging, as well as stable operation over multiple charge cycles. As a result, the battery reliably powers demanding photography and film equipment, providing the energy needed during long photo shoots or video recordings. The use of high-performance cells has also helped reduce the overall weight of the kit, which is particularly important when working with a handheld camera or one mounted on a grip. Fast Charging, Less Downtime Long waits for the battery to charge don’t have to disrupt your work schedule. The SMALLRIG VB50 supports bidirectional USB-C Power Delivery fast charging at up to 45 W, allowing it to fully recharge in about 1.5 hours. An intelligent BMS with a dedicated control system ensures efficient management of this process, supporting multiple fast-charging protocols. The bidirectional functionality of the USB-C port allows it to be used both to recharge the battery itself and to power compatible external devices. This is a convenient solution for creators who often work in changing locations and need to quickly prepare their equipment for the next shots. Multiple Connectors, Even More Possibilities A single battery can power various components of a recording setup without the need for an additional V-Mount adapter plate. The SMALLRIG VB50 is equipped with six interfaces: BP (V-Mount), USB-C, USB-A, D-Tap, DC 8 V, and DC 12 V. This wide selection of connectors allows for direct connection of compatible cameras, video cameras, monitor screens, video transmitters, video lights, smartphones, and laptops. What’s more, the individual interfaces have independent circuits, making it possible to quickly charge devices simultaneously via the USB-C and USB-A ports. This makes it easier to organize power for an extensive film production setup, reduces the number of additional accessories needed, and gives you greater freedom while working. Smart Power Management An advanced BMS (Battery Management System) ensures proper battery operation by automatically adjusting power parameters to current needs. The intelligent system supports adaptive voltage step-up and step-down as well as current regulation, helping to maintain optimal operating conditions for connected devices. It also utilizes a specially developed control system that supports multiple fast-charging protocols and efficient energy flow management. As a result, the SMALLRIG VB50 is ideal for setups that include both film equipment and mobile devices requiring different power specifications. Multi-Level Protection During Operation Equipment safety is particularly important during long recording sessions, which is why the SMALLRIG VB50 is equipped with a comprehensive set of safety features. The intelligent BMS system protects the battery against short circuits, overheating, current overload, overvoltage, overcharging, and excessive discharge. This solution helps reduce the risk of cell damage and ensures stable performance during repeated charge and discharge cycles. Additional protection is provided by a housing made of durable PC plastic, which is characterized by high-temperature resistance, flame-retardant properties, and increased resistance to impacts and drops. Full Control Thanks to the OLED Display Monitoring energy levels and operating parameters is exceptionally easy thanks to the built-in high-brightness OLED display. The screen allows you to quickly read information about power supply and the current battery status, making it easier to plan the next stages of recording. Precise parameter monitoring is handled by a 16-bit analog-to-digital converter (ADC) integrated into the BMS, along with a voltage measurement system that works in conjunction with the main microcontroller (MCU). This setup enables accurate tracking of the battery’s operating status and displays key data on an easy-to-read screen. This allows you to monitor available power in real time and respond appropriately to your equipment’s changing needs. Compact Design for Mobile Setups The SMALLRIG VB50 was designed for creators who need a powerful power source without significantly increasing the size of their setup. Thanks to its highly integrated design, the battery is approximately 30% smaller than comparable models with similar capacity and power. Its compact dimensions and light weight make it easy to transport, set up, and use in the field. The compact design is particularly well-suited for use with mobile camera rigs, where every additional component affects ease of use. You can also easily pack the battery into a camera bag so you always have an extra power source on hand. Modern Look and User-Friendly Operation The SMALLRIG VB50’s functionality goes hand in hand with its elegant design. A distinctive element on the front panel—resembling a lens and covering about two-thirds of its surface—gives the device a modern look. Combined with the bright OLED screen, this gives the battery a modern, minimalist look that blends well with professional film equipment. Operation is made easy by a smart button that allows you to quickly turn the battery on or off and control its operation. Thanks to its instant response to commands, power management remains convenient even during intense work on set. Versatile Support for Creators Whether you’re shooting videos in a studio, producing outdoor documentaries, or setting up a mobile broadcast station, the SMALLRIG VB50 lets you conveniently manage the power needed for your work. A variety of interfaces allow you to power many types of devices, while fast charging and an intelligent BMS system help ensure uninterrupted recording. The compact design makes it easy to build lightweight film sets, and the OLED display lets you constantly monitor the battery status. It’s a versatile solution for photographers, camera operators, and videographers who want to minimize the number of additional power accessories and organize their work more efficiently. Included VB50 mini V-Mount Battery 3579BSmallRig Custom Sticker SetUser Manual   ManufacturerSMALLRIGModelVB50 miniMaterialFlame-retardant PC materialCapacity14.8 V, 3.4 Ah, 50 WhRated Total PowerDischarge power: 50 W, charge power: 45 WV-Mount / D-TAP Input5 A (max.)V-Mount / D-TAP Output14.8 V / 12 A (max.)USB-C Input45 W (max.)D-Tap / BP Input3.4 A (max.)USB-C output5 V⎓3 A, 9 V⎓3 A, 12 V⎓3 A, 15 V⎓3 A, 20 V⎓2.25 A (max.)USB-A output5 V⎓3 A, 9 V⎓3 A, 12 V⎓2 A (max.)BP/D-Tap output5 A (max.)8 V output8 V ⎓ 3 A (max.)12 V Output12 V ⎓ 3 A (max.)DC1 Output8.0 V/max. 3 ADC2 Output12 V/max. 3 ADischarge Cut-off Voltage11 VCharging ProtocolsUSB-C: PD3.0 / QC2.0 / QC3.0 / PPS / DCP-1.5 A / APPLE-2.4 A | USB-A: QC2.0 / QC3.0 / DCP-1.5 A / APPLE-2.4 AOperating temperature-15 ℃ to 60 ℃Charging temperature0 ℃ to 45 ℃Optional Charging Methods16.8 V D-TAP charger, USB-C charger (works with USB-C chargers that support PD fast charging, such as GaN chargers, up to 45 W)Product Dimensions107 × 73 × 34 mmWeight330 g

Regular price: €102.00
Camera battery SMALLRIG DMW-BLK22
Camera battery SMALLRIG DMW-BLK22

SMALLRIG DMW-BLK22 Camera Battery The SMALLRIG DMW-BLK22 5487 is a kit designed for select Panasonic LUMIX cameras, which includes two 1940 mAh lithium-ion batteries and a dual-channel charger with a USB-C input. The full-decoding circuit ensures full compatibility with DMW-BLK22 batteries, enables the camera to display the charge level correctly, and allows you to use original Panasonic chargers without any warning messages appearing. The charger supports an input power of up to 22.5 W, and when used with a compatible power adapter, it can charge two batteries in about 2 hours, making it easy to prepare your equipment for your next photo shoot or video recording. Two Batteries for Longer Run Time Each of the included batteries offers a capacity of 1,940 mAh, a nominal voltage of 7.2 V, and a rated energy of 13.968 Wh. The two included batteries help ensure uninterrupted operation, as one can remain in the camera while the other is ready for use or charging. The charger’s dual-channel design allows you to recharge two batteries simultaneously, but also enables you to charge just one of them. Clear Indicators and Safety Features Each channel of the charger is equipped with five LEDs that display the charge level in 20% increments, allowing you to assess the charge status at a glance. The indicators allow you to monitor the charge level even without connecting the charger to an external power source, and a red light signals a critically low charge level. The built-in safety system monitors temperature and voltage, automatically limiting or stopping charging in the event of overheating or excessive voltage, and switches to trickle charging as the battery nears full charge. USB-C Charging The SMALLRIG charger is equipped with a USB-C port and supports the PD 3.0, QC 2.0, and QC 3.0 standards, allowing it to work with a compatible AC adapter, car charger, or power bank. For maximum performance, the manufacturer recommends using a power source with a minimum output of 22.5 W. When used with a 5 V / 2.4 A power adapter, the device operates in slow-charge mode, in which the battery in channel 1 is charged first, and once it is fully charged, the charger automatically switches to channel 2. Included DMW-BLK22 Battery ChargerDMW-BLK22 battery x 2Battery cover x 2USB-C to USB-C cable, 60 W, 1 m   ManufacturerSMALLRIGModelDMW-BLK22 (5487)Battery typeLithium-ionBattery capacity1940 mAhNominal voltage7.2 VRated energy13.968 WhMaximum charging voltage8.4 VStandard Charging Current408 mAFast Charging1,428 mAMaximum Discharge Current4 ADischarge Cut-off Voltage5.0 VCharging Temperature0°C to 45°CDischarge temperaturefrom -10°C to 60°CUSB-C charger input5 V / 2.4 A, 9 V / 2 A, 12 V / 1.75 A, 15 V / 1.5 AMaximum input power22.5 WSupported standardsPD 3.0, QC 2.0, QC 3.0Output per channel8.4 V / 1 ANumber of charging channels2MaterialPC + ABSProduct dimensions84.8 × 70 × 29.9 mmProduct weight223 ± 10 gCompatibilityPanasonic LUMIX GH7, GH6, GH5 II, S9, G9 II, S5 IIX, S5 II, S5, L10

Regular price: €53.50
Camera battery SMALLRIG DMW-BLK22 (orange)
Camera battery SMALLRIG DMW-BLK22 (orange)

SmallRig DMW-BLK22 USB-C Battery 4979 The SmallRig DMW-BLK22 is a lithium-ion camera battery with a capacity of 2520 mAh, a nominal voltage of 7.2 V, and an energy rating of 18.15 Wh, equipped with a convenient USB-C port. With 5 V / 2 A charging support, it can be fully charged in about 2.5 hours, and the battery can be connected to a power bank, wall charger, or car charger, among other devices. The model is fully decoded, ensuring it works with compatible cameras without error messages, and its distinctive orange casing makes it easy to find quickly in a camera bag. Charging Without a Separate Battery Charger The built-in USB-C port means you don’t always have to carry a separate charger designed for camera batteries when traveling. The ability to use various power sources gives you greater freedom when working outdoors, on a photo shoot, or while traveling. High-current USB-C charging up to 5 V / 2 A reduces the time needed to prepare the battery for the next session. Stable power supply and compatibility with the camera The battery uses high-quality cells and a protection circuit that ensures stable voltage and current during operation. The maximum output current is 5 A, and the built-in safety features enhance safety and reduce the risk of battery malfunction. The housing, made of PC and ABS materials, is durable and resistant to high temperatures, while its dimensions of 56.6 × 39.2 × 20.8 mm match those of the original battery, ensuring a proper fit in the camera compartment. Wide compatibility with Panasonic Lumix cameras The SmallRig DMW-BLK22 is designed for cameras that use the DMW-BLK22 battery and is compatible with, among others, the Panasonic Lumix GH7, GH6, GH5 II, S9, G9 II, S5 IIX, S5 II, S5, and L10 models. Full decoding allows you to use the battery without annoying pop-up messages, which enhances convenience while shooting photos and videos. The product is certified by FCC, CE, RoHS, RCM, KC, and ISED. Included in the set SmallRig DMW-BLK22 USB-C battery0.6 m USB-A to USB-C cableUser manualUser guide   ManufacturerSmallRigModelDMW-BLK22TypeLithium-ion batteryNominal capacity2,520 mAhNominal voltage7.2 VEnergy18.15 WhInput voltage8.4 VUSB-C charging5 V / 2 A max.Full Charge Timeapproximately 2.5 hoursTrickle Charge Current0.2C / 480 mAFast Charge Current0.7C / 1680 mAMaximum input current0.7CMaximum output current5 ADeep discharge protection4.5–7.5 ACut-off voltage5.0 VOperating temperature range0–45°CDimensions56.6 × 39.2 × 20.8 mmBattery weight81 ± 5 gProduct weight with cable100.4 ± 5 gMaterialPC + ABSColororangeCompatibilityIncludes Panasonic Lumix GH7, GH6, GH5 II, S9, G9 II, S5 IIX, S5 II, S5, L10, and other models using the DMW-BLK22 battery

Regular price: €31.50
Camera battery SMALLRIG E6P-C26 (orange)
Camera battery SMALLRIG E6P-C26 (orange)

SMALLRIG E6P-C26 Camera Battery (orange) The SMALLRIG battery is designed for Canon cameras that use the LP-E6P battery type. It has a capacity of 2520 mAh, a nominal voltage of 7.2 V, and an energy rating of 18.144 Wh. The built-in USB-C port allows you to charge the battery from various power sources, such as a power bank, a wall charger, or a car charger, and the 5 V / 2 A input enables a full charge in approximately 2.5 hours. It features a fully decoded electronic circuit that ensures compatibility with compatible cameras, prevents additional messages from appearing during operation, and allows you to check the charge level on the camera’s screen. Longer runtime thanks to a 2520 mAh capacity The 2520 mAh battery provides ample power for photography and video recording. As a result, the battery can serve as both a primary power source and a backup battery for photo shoots, trips, or extended recording sessions. A maximum discharge current of 6 A helps maintain a stable power supply to the device during operation. USB-C Charging in Various Conditions The USB-C port offers greater flexibility for recharging and allows you to use popular power sources. The battery can be connected to, among other things, a power bank, a wall charger, a car charger, or a compatible USB power adapter. The maximum charging current of 2 A allows the battery to be fully charged in about 2.5 hours. Full decoding and broad compatibility The electronic circuitry used is fully decoded, allowing the battery to work with devices designed for the Canon LP-E6P battery without any additional messages appearing during operation. It also supports the transmission of charge level information to the camera. The battery is compatible with, among others, the following Canon models: EOS 5D Mark II, 5D Mark III, 5D Mark IV, 6D, 6D Mark II, 7D, 7D Mark II, 60D, 60Da, 70D, 80D, 90D, XC10, XC15, 5DS, 5DSR, R, R5, R6, R5C, R7, R6 Mark II, R5 Mark II, R6 Mark III, C50, and R6V, as well as other devices that use this type of battery. Safe design and a perfect fit for the camera compartment The casing is made of PC+ABS material, which is fire-resistant and resistant to elevated temperatures. Inside, a high-quality cell and a protection circuit ensure stable voltage and current levels during use. The dimensions of 56.8 × 38.4 × 21 mm correspond to the design of a standard battery of this type, ensuring that the battery fits properly into a compatible camera battery compartment and does not hinder installation or removal. Distinctive Orange Housing The orange color makes it easy to distinguish the SMALLRIG E6P-C26 battery from other batteries in your camera bag. This is particularly useful when working with several spare batteries, as it allows you to quickly locate the correct model. The battery is certified to FCC, CE, RoHS, ISED, KC, and RCM standards, and the package also includes a battery cover, a 0.6-meter USB-A to USB-C cable, and a user manual. Included SmallRig E6P-C26 batteryBattery case0.6 m USB-A to USB-C cableUser manual   ManufacturerSmallRigModel5407Battery TypeFor Canon LP-E6PBattery Capacity2520 mAhNominal Voltage7.2 VEnergy18.144 WhCharging InputUSB-C (5 V / 2 A)Maximum Charging Current2 AMaximum Discharge Current6 ACharging TimeApproximately 2.5 hoursHousing MaterialPC+ABS (flame-retardant)CertificationsFCC, CE, RoHS, ISED, KC, RCMDimensions56.8 × 38.4 × 21 mm

Regular price: €43.50
Camera battery SMALLRIG EN-EL15c (orange)
Camera battery SMALLRIG EN-EL15c (orange)

SMALLRIG EN-EL15c Camera Battery (orange) The SMALLRIG EN-EL15c 4966 is a lithium-ion battery designed for select Nikon cameras, featuring its own USB-C port for convenient recharging. It can be charged using a power bank, power strip, car charger, or dedicated charger, making it easier to prepare the battery for use both at home and on the go. The cell, with a nominal capacity of 2400 mAh, ensures long runtime, and USB-C charging at up to 5 V / 2 A allows the battery to be fully charged in about 2.5 hours. The model is fully decoded, so it works with compatible cameras without displaying warning messages. Convenient USB-C Charging The built-in USB-C port reduces the need to rely solely on a traditional battery charger and offers greater flexibility when working away from home or the studio. The ability to connect the battery to a power bank or car charger, among other options, comes in handy when shooting on the go, when access to a standard power source may be limited. The kit includes a 0.6-meter USB-A to USB-C cable. An indicator light makes it easy to monitor the charging process—a red light indicates charging, while a green light indicates that charging is complete. Stable and Safe Power Supply The battery features a high-quality cell and an electronic circuit designed to ensure stable voltage and current during operation. The nominal voltage is 7.2 V, the energy capacity is 17.28 Wh, and the maximum output current reaches 5 A, which ensures proper power supply to compatible photographic equipment. The design also includes protection against over-discharge. The casing is made of PC and ABS materials, which ensure adequate durability during everyday use. Compatible with Nikon cameras The battery measures 55.7 × 39.3 × 19.9 mm and matches the size of the original battery, ensuring it fits properly in the camera’s battery compartment. The SMALLRIG EN-EL15c is compatible with Nikon cameras including the Z8, Z7 II, Z7, Z6 II, Z6, Z5, Zf, Z6 III, ZR, D850, D810, D810A, D780, D750, D610, D500, D7500, and D7200. Lightweight and Easy to Spot The orange casing clearly distinguishes the battery from typical black devices, making it easier to find in a camera bag or backpack. Weighing approximately 80 g, this spare battery doesn’t add much extra weight when transporting your gear. The matte finish of the casing improves grip comfort, and the PC and ABS construction enhances durability against typical daily wear and tear. The product is certified by FCC, UL, UKCA, CE, RoHS, and ISED. Included in the set SMALLRIG EN-EL15c batteryBattery cover0.6 m USB-A to USB-C cableUser manual   ManufacturerSMALLRIGModelEN-EL15c 4966Battery typeLithium-ionNominal cell capacity2400 mAhNominal battery capacity2280 mAhNominal voltage7.2 VEnergy17.28 WhInput voltage8.4 VUSB-C5 V / 2 A max.Slow charging0.2C / 480 mAFast charging0.7C / 1680 mAMaximum input current0.7CMaximum output current5 AOver-discharge protection4.5–7.5 ACut-off voltage5.0 VCharging timeapproximately 2.5 hoursOperating temperature0°C–45°CDimensions55.7 × 39.3 × 19.9 mmBattery weight80 ± 5 gProduct weight82 ± 5 gMaterialPC + ABSCompatibilityNikon Z8, Z7 II, Z7, Z6 II, Z6, Z5, D850, D810, D810A, D780, D750, D610, D500, D7500, D7200, Zf, Z6 III, ZR

Regular price: €41.50
Camera battery SMALLRIG NP-F970 (black)
Camera battery SMALLRIG NP-F970 (black)

SMALLRIG NP-F970 Camera Battery (Black) The SMALLRIG NP-F970 4469 battery is a lithium-ion power source with a capacity of 10,500 mAh and an energy rating of 76.65 Wh, designed for extended use during recording, photography, and video production. In addition to the main power port for compatible devices such as cameras, LED lights, monitors, and motorized sliders, the model is equipped with a USB-C port with input and output functionality, as well as a USB-A port. As a result, the battery can also serve as a portable power source for smartphones, tablets, or other electronic devices, increasing its versatility both in the studio and on location. Fast Charging via USB-C The USB-C port supports fast charging at up to 36 W and standards such as PD 3.0, QC 3.0, QC 2.0, FCP, AFC, and PPS. When using a compatible charger, a full battery charge via USB-C can take approximately 3.5 hours, allowing you to prepare your equipment more efficiently for the next session. The USB-A port offers an output power of up to 27 W, and the parallel circuit design of the USB-C and USB-A ports allows for simultaneous fast charging of two devices with a combined power output not exceeding 54 W. Easy-to-Read Battery Level Indicator The built-in OLED display lets you check the exact battery level in real time, making it easier to plan your remaining operating time. A touch button allows you to quickly view the percentage, and when the battery level drops below 10%, the numbers on the screen begin to flash, alerting you that it’s time to recharge. The battery also offers the option to disable the USB-C and USB-A ports and enter sleep mode, which helps reduce unnecessary power consumption during storage or transport. Safe Design for Everyday Use The SMALLRIG NP-F970 uses high-quality cells and an intelligent power management system that works in conjunction with safety features to protect against, among other things, overcurrent and deep discharge. The housing, made of PC and ABS materials, measures approximately 74.6 × 71.6 × 38.5 mm, and the battery itself weighs about 362 g, making it compatible with devices that use the NP-F970 standard. The black, minimalist design complements the model’s functional character, and compliance with FCC, CE, and ISED certifications confirms that it meets specific requirements for the use of electronic devices. Included in the set SMALLRIG NP-F970 USB-C BatteryBattery coverUSB-C to USB-C cableUser manualUser guideWarranty card   ManufacturerSMALLRIGModelNP-F970Battery typelithium-ionCapacity10,500 mAhEnergy76.65 WhNominal Voltage7.3 VCharging Voltage8.4 VUSB-C Input/Output5 V / 3 A, 9 V / 3 A, 12 V / 3 AMaximum USB-C Power36 WUSB-C protocolsPD 3.0, QC 3.0, QC 2.0, FCP, AFC, PPSUSB-A output5 V / 3 A, 9 V / 3 A, 12 V / 2.25 AMaximum USB-A power27 WUSB-A protocolsQC 3.0, QC 2.0, FCP, AFCTotal power when using USB-C and USB-A simultaneouslyup to 54 WFull charge time via USB-Capproximately 3.5 hoursMaximum discharge current of the main port10 ADischarge cut-off voltage5.2 VOperating temperature during charging0°C to 45°COperating temperature during dischargefrom -10°C to 45°CDisplayOLEDMaterialPC + ABSDimensionsapproximately 74.6 × 71.6 × 38.5 mmBattery weight362 ± 10 gColorblack

Regular price: €73.00
Camera battery SMALLRIG NP-F970 (green)
Camera battery SMALLRIG NP-F970 (green)

SMALLRIG NP-F970 Camera Battery (Green) The SMALLRIG NP-F970 4577 battery in green is a lithium-ion power source with a capacity of 10,500 mAh and an energy rating of 76.65 Wh, designed for use with cameras, LED lights, monitors, and motorized sliders, among other devices. The model features a USB-C port with input and output capabilities of up to 36 W, as well as a USB-A port with up to 27 W, allowing it to also power smartphones, tablets, and other mobile devices. Support for 36 W PD fast charging allows the battery to be fully charged via USB-C in 3.5 hours, ensuring it’s ready for the next photo shoot or video recording. Power for Multiple Devices The battery’s main connector is compatible with NP-F970-standard equipment, making this model ideal for extensive photo and video setups. The USB-C and USB-A ports operate in parallel, enabling the simultaneous fast charging of two devices at a combined power output not exceeding 54 W. This allows you to recharge your phone or other accessories while working, without needing a separate power bank. Easy-to-Read Battery Level Indicator The built-in OLED screen lets you accurately check the remaining battery level, which makes it easier to plan your work and reduces the risk of your equipment running out of power unexpectedly. A single press of the button displays the battery percentage, while during charging, the screen shows the current charge level and a lightning bolt icon. When the charge level drops below 10%, the display begins to flash for 3 seconds, indicating that the battery needs to be recharged. Support for Popular Fast-Charging Standards The USB-C port supports the PD3.0, QC3.0, QC2.0, FCP, AFC, and PPS protocols, allowing the battery to work with a wide range of compatible chargers and devices. The USB-A port supports the QC3.0, QC2.0, FCP, and AFC standards and offers voltages of 5 V, 9 V, and 12 V. This broad compatibility means that the SMALLRIG NP-F970 can serve not only as a battery for photography and film equipment but also as a practical power source for mobile devices. Safety and Robust Construction The SMALLRIG NP-F970 utilizes high-quality cells and an intelligent power management system, and its built-in safety features protect against, among other things, overcurrent and deep discharge. The casing is made of PC+ABS plastic, which performs well during frequent transport and field use. The green finish gives the battery a distinctive look, and its compact dimensions make it easy to store alongside other photography accessories. Included in the set SMALLRIG NP-F970 USB-C BatteryBattery caseUSB-C to USB-C cableOperating instructionsUser manualWarranty card   ManufacturerSmallRigModelNP-F970TypeLithium-ion batteryCapacity10,500 mAhEnergy76.65 WhNominal Voltage7.3 VCharging Voltage8.4 VUSB-C Input/Output5 V / 3 A, 9 V / 3 A, 12 V / 3 AMaximum USB-C Power36 WUSB-C ProtocolsPD3.0, QC3.0, QC2.0, FCP, AFC, PPSUSB-A Output5 V / 3 A, 9 V / 3 A, 12 V / 2.25 AMaximum USB-A power27 WUSB-A protocolsQC3.0, QC2.0, FCP, AFCMaximum combined USB-C and USB-A power54 WFull charge time via USB-C3.5 hoursMaximum discharge current of the main port10 AOvercurrent protection threshold of the main port11 ADischarge cut-off voltage5.2 VUSB-C overcurrent protection≥3.5 AUSB-A overcurrent protection5 V / 9 V ≥3.5 A, 12 V ≥2.6 AOperating temperature during charging0°C to 45°COperating temperature during dischargefrom -10°C to 45°CMaterialPC+ABSBattery dimensions74.6 × 71.6 × 38.5 mmBattery weight362 ± 10 gColorgreenDisplayOLED

Regular price: €85.00
Camera battery SMALLRIG NP-FZ100
Camera battery SMALLRIG NP-FZ100

SMALLRIG NP-FZ100 Camera Battery The SMALLRIG NP-FZ100 5483 is a kit designed for compatible Sony cameras and camcorders, which includes two 1940 mAh lithium-ion batteries, a dual-channel charger, and a USB-C to USB-C 60 W. The full-decoding system ensures proper compatibility with devices that use the NP-FZ100, eliminating “incompatible battery” error messages and allowing the camera to display the battery level. The charger supports USB-C fast charging at up to 22.5 W and allows for simultaneous charging of two batteries. Two 1940 mAh batteries Each of the included batteries offers a rated capacity of 1940 mAh and an energy capacity of 13.968 Wh. The two batteries in the set provide a larger power reserve during photography and video recording, so that when one runs out, it can be quickly replaced with the other. The batteries have a nominal voltage of 7.2 V and a maximum discharge current of 4 A, which allows for a stable power supply to compatible cameras and camcorders. Charging two batteries simultaneously The charger’s dual-channel design allows you to charge one or two batteries at the same time. When using a sufficiently powerful power source, two batteries can be fully charged in about 2 hours, making it easy to prepare your equipment for the next session. Each channel offers a rated output of 8.4 V / 1 A and operates independently of the other. Clear charge level indicator Each channel of the charger is equipped with five LEDs that indicate the battery level and current charging status. The charge level is displayed in 20% increments, so you can quickly see which battery is ready for use. The indicators work even when the charger is not plugged into a power source, and a red indicator light signals a very low battery level. Versatile USB-C Charging The charger uses a USB-C port and supports the PD 3.0, QC 2.0, and QC 3.0 standards. This allows it to be powered by a compatible AC adapter, car charger, or power bank, which increases convenience when working away from home. The maximum input power is 22.5 W, so the manufacturer recommends using a power adapter with at least 22.5 W of power to achieve the full charging speed. Charging Safety Features A built-in electronic circuit monitors temperature and voltage during charging. If the temperature rises excessively, charging may automatically slow down; if the voltage is detected as too high, charging will stop. As the battery nears full charge, trickle charging is also applied to help reduce unnecessary strain on the cells. Compatibility and Compact Design The kit is compatible with, among others, the Sony α6600, α9 II, α7 III, α7R III, α1, α7C, α7S III, α7R IV, α7R V, α6700, FX3, FX30, α7CR, α7C II, α7 IV, ZV-E1, ZV-E10 II, α1 II, and α7 V, among others. The charger itself has compact dimensions of 83.2 × 63.9 × 26.8 mm and weighs 205 ± 10 g, making it easy to fit in a camera bag. Included in the set NP-FZ100 battery chargerNP-FZ100 1940 mAh battery x 2Battery cover x 260 W USB-C to USB-C cable (1 m long)   ManufacturerSmallRigModel5483Battery typeLithium-ionBattery capacity1940 mAhRated energy13.968 WhNominal Battery Voltage7.2 VCharging Cut-off Voltage8.4 VStandard Charging Current0.2C / 408 mAFast Charging Current0.7C / 1,428 mAMaximum discharge current4 ADischarge cut-off voltage5.0 VUSB-C input5 V / 2.4 A, 9 V / 2 A, 12 V / 1.75 A, 15 V / 1.5 AMaximum input power22.5 WSupported protocolsPD 3.0, QC 2.0, QC 3.0Charger output per channel8.4 V / 1 ANumber of charging channels2Approximate charging time for two batteriesabout 2 hoursCharge indicator5 LEDs per channelCharger operating temperature0°C to 45°CBattery charging temperature0°C to 45°CBattery discharge temperature-10°C to 60°CMaterialPC + ABSCharger dimensions83.2 × 63.9 × 26.8 mmCharger weight205 ± 10 gCertificationsCCC, FCC, CE, RoHS, ISED, KC, RCM

Regular price: €73.00
Camera battery SMALLRIG NP-FZ100 (orange)
Camera battery SMALLRIG NP-FZ100 (orange)

SMALLRIG NP-FZ100 Camera Battery (Orange) The SMALLRIG NP-FZ100 is a lithium-ion battery for Sony cameras, equipped with a USB-C port that allows charging directly from a power bank, power strip, car charger, or other compatible power source. The battery supports 5 V / 2.2 A USB-C charging, so a full charge takes approximately 2.5 hours. Its nominal capacity is 2280 mAh, while the rated capacity of the cells used is 2400 mAh, providing the power reserve needed for extended photography and video recording. Stable Power Supply and Safe Design The battery is fully decoded, allowing it to work with Sony cameras without triggering warning messages related to the use of a replacement battery. High-quality cells and a properly designed safety circuit ensure stable voltage and current during operation, with a maximum output current of 5 A. The casing is made of PC and ABS materials, which are known for their durability and fire resistance, while the bright orange color makes it easy to quickly find the battery in a camera bag. Compatible with Sony cameras The battery measures 51.8 × 38.8 × 22.6 mm, so it matches the size of the original NP-FZ100 battery and fits properly in the camera’s battery compartment. This model is compatible with, among others, the Sony α6600, α6700, α7 III, α7 IV, α7R III, α7R IV, α7R V, α7S III, α7C, α7C II, α7CR, α9 II, α1, α1 II, ZV-E1, ZV-E10 II, FX3, and FX30. Convenient charging even when you’re on the go The built-in USB-C port allows you to recharge the battery without needing a separate battery charger, which can be especially convenient while traveling, during outdoor shoots, or when working in the field. The kit includes a 0.6-meter USB-A to USB-C cable and a battery case that facilitates safe storage and transport. The model is certified by FCC, UL, UKCA, CE, RoHS, and ISED certifications, and its operating temperature ranges from 0°C to 45°C. Included in the set SMALLRIG NP-FZ100 USB-C BatteryBattery case0.6 m USB-A to USB-C cableUser manual   ManufacturerSMALLRIGModelNP-FZ100Battery typeLithium-ionNominal battery capacity2280 mAhRated cell capacity2400 mAhNominal voltage7.2 VEnergy17.28 WhInput Voltage8.4 VUSB-C Charging5 V / 2.2 A max.Trickle Charge Current0.2C / 480 mAFast Charge Current0.7C / 1680 mAMaximum input current0.7CMaximum output current5 AOver-discharge protection4.5–7.5 ACut-off voltage5.0 VCell specificationsNCR18500A240A × 2 / YLOperating temperature0°C–45°CDimensions51.8 × 38.8 × 22.6 mmBattery weight81 ± 5 gMaterialPC + ABSColororangeCompatibilitySony α6600 / α9 II / α7 III / α7R III / α1 / α7C / α7S III / α7R IV / α7R V / α6700 / FX3 / FX30 / α7CR / α7C II / α7 IV / ZV-E1 / ZV-E10 II / α1 II and other models using the NP-FZ100 battery

Regular price: €39.00
Camera cage SMALLRIG 4183B Sony FX3/FX30
Camera cage SMALLRIG 4183B Sony FX3/FX30

SMALLRIG 4183B Cage for Sony FX3/FX30 The SMALLRIG 4183B is a protective cage designed for the Sony FX3, FX3A, and FX30 cameras, which protects the body while allowing you to expand your setup with additional accessories. The design features 1/4"-20 threads, ARRI 3/8"-16 positioning holes, cold shoe mounts, NATO rails, and a QD port, allowing you to attach handles, a monitor, a microphone, an LED light, or a strap, among other accessories. The Arca-Swiss bottom profile allows for quick connection to compatible DJI RS gimbals and corresponding heads and plates that use this standard. The modular design also includes a removable top NATO rail, which must be removed before attaching the original Sony XLR grip. Stable Mounting and a More Comfortable Grip The cage is secured to the body using 1/4"-20 screws located on the sides and bottom, which limits the camera’s ability to rotate inside the frame. Protective elements are used at the contact points to reduce the risk of scratches during assembly and use. Next to the battery compartment is an additional hinged arm shaped to fit the camera, providing support for your little finger and improving the comfort of holding the camera. HDMI Cable Clamp The kit includes a dedicated HDMI cable clamp that helps stabilize the cable connected to the camera. It prevents accidental movement of the plug during recording, which helps maintain a stable signal transmission. This solution is particularly useful when using an external monitor, recorder, or other equipment that utilizes an HDMI connection. Extensive Accessory Mounting System Numerous mounting points allow you to customize the cage’s configuration to suit your shooting style and the equipment you’re using. 1/4"-20 threads and ARRI 3/8"-16 holes allow for the installation of arms, grips, and monitor mounts, while NATO rails facilitate quick attachment and removal of compatible accessories. Cold shoe mounts can be used to attach a microphone or LED light, and the QD port and additional holes allow you to use compatible wrist or arm straps. Quick Mounting with the Arca-Swiss System The Arca-Swiss bottom profile allows for direct mounting of the cage on compatible DJI RS gimbals, including select RS 2, RSC 2, RS 3, RS 3 Pro, RS 4, RS 4 Pro, and RS 5. It can also be used with compatible Arca-Swiss-standard heads and plates, including the dedicated SmallRig Arca-Type Quick Release Plate 3154, though depending on the system used, a suitable adapter or additional plate may be required. The frame is constructed from aluminum, stainless steel, silicone, and fiber-reinforced PC plastic, providing protection and extensive configuration options while weighing approximately 190 g. Included SmallRig 4183B CageNATO railHDMI cable clamp1/4"-20 x 2 screw   ManufacturerSmallRigModel4183BCompatibilitySony FX30, Sony FX3, Sony FX3AProduct Dimensions159 × 101.2 × 66.2 mmProduct Weight190 gMaterialsaluminum alloy, stainless steel, silicone, PC + fiberMounting Points1/4"-20, ARRI 3/8"-16, cold shoe, NATO, QDBottom MountArca-Swiss profileCompatible gimbalsDJI RS 2, RSC 2, RS 3, RS 3 Pro, RS 4, RS 4 Pro, RS 5

Regular price: €95.00