Power station Allpowers VOLIX P300
€195.00
Available, delivery time: 3-5 werkdagen
315 items in stock
Product information "Power station Allpowers VOLIX P300"
Allpowers VOLIX P300 Power Station
The Allpowers VOLIX P300 is a compact power station with a capacity of 256 Wh, equipped with a LiFePO4 battery and a pure sine wave inverter. The AC output provides up to 300 W (600 W peak power), and the AC input supports up to 300 W, allowing the battery to be charged from 0 to 100% in about an hour. The station also offers solar charging up to 110 W, charging from a car outlet, and a combination of AC and solar charging. With a UPS function featuring a switchover time of up to 20 ms, Wi-Fi and Bluetooth control, a USB-C port delivering up to 100 W, and a weight of 3.57 kg, the VOLIX P300 serves as a convenient power source both at home and on the go.
Powering Electronics and Small Devices
The 300 W output power allows you to power devices with low power consumption, such as phones, tablets, cameras, drones, and lighting. The 256 Wh capacity comes in handy while camping, traveling, working away from a power outlet, and in emergency situations. The pure sine wave ensures stable voltage parameters, which is important when connecting sensitive electronics.
Four Ways to Recharge
The VOLIX P300 can be charged in four ways: from the electrical grid, via a solar panel, from a car outlet, or simultaneously from the grid and solar power. The solar input with an MPPT controller supports voltages from 11 to 30 V and power up to 110 W, while the car input works with 12–24 V systems and also provides power up to 110 W. This allows you to adapt the charging method to your location and the currently available power source.
UPS Function with Switching Time of Up to 20 ms
In the event of a mains power outage, the UPS function can switch the connected device to battery power in no more than 20 ms. This allows the station to be used as an additional emergency power source for compatible electronic devices and minimizes the impact of short-term power outages.
LiFePO4 battery with over 4,000 cycles
The LiFePO4 battery used offers over 4,000 charge cycles, making the station suitable for repeated and regular use. During operation, the noise level is approximately 30 dB, which minimizes disturbance when using the device at home, at work, or while camping.
100 W USB-C and Convenient Control via the App
For charging mobile devices, the VOLIX P300 offers one USB-C port with up to 100 W of power and two USB-A ports with up to 18 W each. The ALLPOWERS app, which connects to the station via Wi-Fi or Bluetooth, allows you to monitor operating parameters and manage settings from your phone. The entire unit is housed in a case measuring 260 × 210 × 125 mm and weighing 3.57 kg, making the power station easy to transport and store.
Included in the set
- Allpowers VOLIX P300 power station
- AC power cord
- User manual
| Manufacturer | Allpowers |
|---|---|
| Model | P300 |
| Capacity | 256 Wh |
| Battery type | LiFePO4 |
| Battery Lifespan | Over 4,000 charge cycles |
| AC Output | 100–120 V / 220–240 V, max. 300 W, peak power 600 W |
| AC Input | 100–120 V, max. 4 A, 60 Hz / 220–240 V, max. 2 A, 50 Hz |
| Mains charging | up to 300 W, 0–100% in about 1 hour |
| Solar input | MPPT 11–30 V, 8 A, max. 110 W |
| Car input | 12–24 V, max. 110 W |
| Charging methods | AC, solar panel, car socket, AC + solar panel |
| UPS | switchover time ≤20 ms |
| App connectivity | Wi-Fi / Bluetooth |
| USB-C | 1 × 5/9/12/15 V – 2 A, 20 V – 5 A, max. 100 W |
| USB-A | 2 × 5 V – 3 A, 9 V – 2 A, 12 V – 1.5 A, max. 18 W each |
| Noise level | 30 dB |
| Dimensions | 260 × 210 × 125 mm |
| Weight | 3.57 kg |
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
MORE FROM THIS CATEGORY
Similar products
VTOMAN FlashSpeed 1500 Battery (Gray) This additional VTOMAN LIFEBMS® battery offers a capacity of 1548 Wh, allowing you to increase the energy reserve available to FlashSpeed series stations. When connected to the FlashSpeed 1500 via a cable, it expands the system’s total capacity, allowing devices and electrical equipment to operate for longer periods. This model is designed to work with the FlashSpeed 1500, 1000, and 600 power stations, and the additional capacity is ideal wherever you need greater independence from the electrical grid. Fully charged in just 60 minutes Once the additional battery is connected to the FlashSpeed 1500 and the unit is plugged into a wall outlet, the system can be fully charged in 60 minutes. The short recharge time allows you to prepare the system for its next use more quickly and minimize long interruptions in power supply. The battery supports AC charging, which makes it easy to recharge using the electrical grid. LiFePO4 Cells for Over 3,000 Cycles The LFP cells used employ LiFePO4 chemistry, which ensures a long service life and stable battery performance. The product offers over 3,000 full charge cycles, after which it retains up to 80% of its original capacity. According to the manufacturer’s data, with daily use, it can provide up to 10 years of service, making it an ideal long-term solution for expanding the capabilities of a power station. LIFEBMS™ for Safe Energy Management The built-in LIFEBMS™ system manages battery operation and is a key component of its safety design. Combined with LiFePO4 cells, it provides a solution designed for repeated, regular charging and discharging. As a result, the additional battery can be used both for the daily power supply of devices and when you need a larger energy reserve for an extended period. Longer Device Runtime The 1,548 Wh capacity extends the runtime of connected devices and equipment without having to rely solely on the station’s main battery. This is particularly useful when access to a power outlet is limited or when you want to store more energy for later use. Connecting an additional battery to the FlashSpeed 1500 significantly increases the total energy capacity of the entire system. A Space-Saving Design The battery features a compact, ergonomic design that allows you to stack additional modules on top of one another. Additional batteries can be safely stacked on the power station and on top of each other, allowing for better use of available space. This solution makes it easier to organize an expanded power system and reduces the amount of space occupied by individual components. System expansion without unnecessary complications Connecting an additional battery to a compatible station is done via a cable, so increasing the available capacity does not require complicated configuration. This solution allows you to adjust the amount of available energy to your current needs and extend the runtime of your most important devices. The combination of 1548 Wh capacity, fast charging, LiFePO4 technology, and the LIFEBMS™ system makes this battery a functional extension of the VTOMAN FlashSpeed power station. Included VTOMAN FlashSpeed battery x1CP3500 cable x1User manual x1 Specifications ManufacturerVTOMANNameLIFEBMS® 1548Wh Extra BatteryTypeAdditional battery for power stationCapacity1548 WhCell typeLiFePO4Number of cyclesOver 3,000Capacity after 3,000 cyclesUp to 80% of initial capacityDeclared service life with daily useUp to 10 yearsBattery management systemLIFEBMS™ChargingACFull charge time with FlashSpeed 150060 minCompatibilityFlashSpeed 1500 / 1000 / 600Connection methodWiredStackableYes
VTOMAN Battery for Jump 1500 The VTOMAN battery for Jump 1500 is an additional power pack with a capacity of 1548 Wh, designed to work with the VTOMAN Jump 1000, Jump 1500X, and Jump 1800/2200 power stations. It significantly increases the available energy supply without requiring replacement of the main power station. The battery cannot operate independently and must be connected to a compatible VTOMAN device. More Power for Compatible Stations Connecting an additional battery increases the capacity of various VTOMAN models. For the Jump 1000, capacity increases from 1,408 Wh to 2,956 Wh; for the Jump 1500X, from 828 Wh to 2,376 Wh; and for the Jump 1800/2200, from 1,548 Wh to 3,096 Wh. This solution extends the operating time of connected devices and allows you to expand your existing power system without purchasing a new station. Durable LiFePO4 Cells The VTOMAN Jump 1500 Extra Battery uses LiFePO4 cells with a lifespan exceeding 3,000 cycles until 80% of their original capacity is retained. The declared shelf life is 5 years, which complements the long service life of the battery technology used. With a capacity of 1,548 Wh, this additional module can significantly increase the energy reserve of a compatible station. LifeBMS Ensures Safety The built-in LifeBMS battery management system is responsible for protection during operation and charging. It includes, among other things, safeguards against overvoltage, overcharging, over-discharging, short circuits, current overload, and abnormal temperatures. As a result, the battery’s most critical operating parameters are constantly monitored. Expansion Without Replacing the Main Station An additional battery is a practical way to increase the capacity of an existing VTOMAN system. Instead of replacing the main station with a larger model, you can simply connect an additional module to gain a larger energy reserve. The connection is made using the CP3500 cable included in the kit. Robust design for operation in various conditions The battery measures 360 × 270 × 280 mm and weighs 14.7 kg. It can operate at temperatures ranging from -20°C to 55°C, while charging is possible between 0°C and 55°C. This allows it to work with the power station in a variety of usage scenarios, both at home and away from a constant power source. Included in the set VTOMAN Jump 1500 Extra Battery x1CP3500 cable x1User manual x1 ManufacturerVTOMANNameJump 1500 Extra BatteryModelPB-26Capacity1548 WhCell TypeLiFePO4LifespanOver 3,000 cycles to 80% capacityShelf Life5 yearsBattery Management SystemLifeBMSProtectionsProtection against overvoltage, abnormal temperature, overcharging, short circuit, overcurrent, and over-dischargeCompatibilityVTOMAN Jump 1000, Jump 1500X, Jump 1800/2200Jump 1000 capacity after expansion2596 WhJump 1500X capacity after expansion2376 WhJump 1800/2200 capacity after expansion3096 WhStandalone operationNoNet weight14.7 kg / 32.4 lbDimensions360 × 270 × 280 mm / 14.2 × 10.6 × 11.0 inchesOperating temperature-20°C to 55°C / 14°F to 113°FCharging temperature0°C to 55°C / 32°F to 113°F
VTOMAN FlashSpeed2400 2400W Portable Power Station The VTOMAN FlashSpeed 2400 is a portable power station with a capacity of 1408 Wh, a continuous power output of 2400 W, and a peak power output of up to 3200 W. Pure Sine Wave technology ensures a pure sine wave output, while V-BEYOND™ allows it to handle momentary power surges of up to 3200 W. A total of 12 ports are available, and the unit is complemented by a UPS function with a switching time of less than 10 ms, 12 V vehicle jump-start capability, and a built-in LED light with 5 operating modes. Durable LiFePO4 Battery The built-in LiFePO4 battery offers a capacity of 1,408 Wh and a lifespan exceeding 3,000 cycles until it retains at least 80% of its original capacity. The SuperSafe LIFEBMS system ensures proper battery operation and protects the station’s most critical operating parameters. This solution works well for frequent use as both a mobile and an emergency power source. 12 ports for powering multiple devices The FlashSpeed 2400 is equipped with three AC outlets with a total continuous power output of 2,400 W, two USB-C ports delivering up to 100 W each, and four USB-A ports. Three USB-A ports offer up to 12 W per port, and one additional port supports fast charging up to 18 W. It also features a 12 V / 10 A car power outlet, a DC5521 12 V / 10 A output, and a separate 12 V jump-start port, providing extensive options for connecting various types of equipment. Full charge in about an hour CHARGECORE technology allows the station to be fully charged from 0% to 100% in about 1 hour using an AC input with a power rating of up to 1500 W. The FlashSpeed 2400 supports four charging methods: from a wall outlet, a car, solar panels, and simultaneously from AC and solar power. The 12–60 V solar input supports up to 600 W and works with an MPPT controller, while the 12–20 V DC input offers up to 200 W. UPS Emergency Power Supply The UPS function allows the VTOMAN FlashSpeed 2400 to serve as a backup power source during a power outage. Automatic switching occurs in less than 10 ms, minimizing the power interruption to connected devices. As a result, the unit can serve a practical purpose at home, in the office, or in other locations where rapid power backup is essential. Starting Vehicles with a 12 V System The built-in 12 V jump-start port allows you to start vehicles with a dead battery. This feature is designed for passenger cars, SUVs, and light trucks. The kit includes a jumper cable, allowing the FlashSpeed 2400 to serve as an emergency starter. Portable Design and 5 Light Modes The unit measures 393 × 280 × 270 mm and weighs 19 kg, so despite its high power and capacity, it remains portable enough to be moved as needed. The built-in LED light offers five modes: low, medium, high, strobe, and SOS. It can therefore serve as an additional light source while traveling, working off-grid, or during a power outage. Included in the set VTOMAN FlashSpeed 2400 power station x1AC charging cable x1Jump-start cable x1Car charger cable x1USB-C to USB-C cable x1USB-A to USB-C cable x1Quick start guide x1 ManufacturerVTOMANNameFlashSpeed 2400 Portable Power StationCapacity1408 WhCell TypeLiFePO4LifespanOver 3,000 cycles to at least 80% capacityBattery Management SystemSuperSafe LIFEBMSNumber of Ports12AC Outlets3Continuous AC Power2,400 WPeak AC Power3,200 WAC Output TechnologyPure Sine WaveTechnologyV-BEYOND™USB-C Ports2USB-C Specifications5 V 3 A / 9 V 3 A / 12 V 3 A / 15 V 3 A / 20 V 5 AMaximum USB-C Port Power100 WUSB-A Ports4USB-A Specifications3 × 5 V 2.4 A and 1 × 5 V 3 A / 9 V 2 A / 12 V 1.5 AMaximum Power of Standard USB-A Port12 WMaximum Power of USB-A Fast Charge Port18 WCar socket12 V 10 AMaximum power of car socket120 WDC5521 output12 V 10 AMaximum power of DC5521120 WJump-start port12 VAC inputUp to 1500 WFull AC charging timeApproximately 1 hourFast charging technologyCHARGECOREDC input12–20 VMaximum DC input power200 WSolar input12–60 VMaximum solar input power600 WMPPT controllerYesCharging MethodsAC, car, solar panels, AC + solar powerUPS FunctionYesUPS Switching Time<10 msFlashlight5 modesFlashlight ModesLow, medium, high, strobe, SOSNet weight19 kg / 41.89 lbDimensions393 × 280 × 270 mm / 15.5 × 11 × 10.6 inches
VTOMAN FlashSpeed1500 1500W Power Station The VTOMAN FlashSpeed 1500 is a portable power station with a capacity of 1408 Wh, a continuous power output of 1500 W, and a peak power output of up to 3000 W. Pure Sine Wave technology ensures a clean sine wave, while V-BEYOND™ allows the unit to handle momentary power surges of up to 3,000 W. A total of 12 outputs are available, allowing you to power multiple devices simultaneously. The power station also offers a UPS function with a switchover time of approximately 10 ms, a 12 V vehicle jump-start function, and an integrated flashlight with 5 operating modes. High-Capacity and Durable LiFePO4 Battery The built-in LiFePO4 battery offers a capacity of 1,408 Wh and a lifespan of over 3,000 cycles until it retains at least 80% of its original capacity. The LIFEBMS protection system ensures proper battery operation and helps monitor key performance parameters of the power station. If necessary, runtime can be further extended by connecting an optional VTOMAN battery, available separately. 12 outputs for various devices The FlashSpeed 1500 is equipped with three AC outlets with a total continuous power output of 1,500 W, two USB-C ports with up to 100 W each, and four USB-A ports. The three USB-A ports offer up to 12 W per port, and an additional port supports fast charging up to 18 W. Also available are a 12 V / 10 A car outlet, a DC5521 12 V / 10 A output, and a separate 12 V jump-start port. This combination allows you to power both AC-powered equipment and devices charged via USB or DC. Fully charged in about an hour The FlashSpeed 1500 supports ultra-fast recharging. The maximum AC input power is 1500 W, which allows the station to be charged from 0% to 100% in about 1 hour. In addition to mains power, there is a 12–20 V DC input with a power rating of up to 200 W and a 30–60 V solar input with a power rating of up to 400 W, supported by an MPPT controller. UPS Emergency Power Supply The VTOMAN FlashSpeed 1500 can serve as a backup power source during a mains power outage. The UPS function ensures automatic switching to battery power in approximately 10 ms. This minimizes downtime for connected devices and enhances the station’s utility in both residential and emergency applications. Car Jump-Start Function The built-in 12 V jump-start port allows the FlashSpeed 1500 to be used to start vehicles with a dead battery. This feature can be used in both gasoline and diesel-powered vehicles. The kit includes a dedicated jump-start cable, so the station can serve as both an energy storage device and an emergency jump-start source. Portable Design and Flashlight with 5 Modes The station measures 393 × 280 × 270 mm and weighs 18.8 kg, combining compactness with a design that allows it to be carried as needed. The integrated flashlight offers five modes: low, medium, high, SOS, and strobe. It can therefore serve as an additional light source while traveling, during fieldwork, or in the event of a power outage. Included in the package VTOMAN FlashSpeed 1500 Power Station x1AC charging cable x1Jump-start cable x1Car charger cable x1USB-C to USB-C cable x1USB-A to USB-C cable x1Quick start guide x1 ManufacturerVTOMANNameFlashSpeed 1500 Portable Power StationCapacity1408 WhCell typeLiFePO4LifespanOver 3,000 cycles to at least 80% capacityBattery Management SystemLIFEBMSExpandableYes, using an additional VTOMAN battery sold separatelyNumber of Outputs12AC Outlets3Continuous AC Power1,500 WPeak AC Power3,000 WAC Output TechnologyPure Sine WaveTechnologyV-BEYOND™USB-C Ports2USB-C Specifications5 V 3 A / 9 V 3 A / 12 V 3 A / 15 V 3 A / 20 V 5 AMaximum USB-C Port Power100 WUSB-A Ports4USB-A Specifications3 × 5 V 2.4 A and 1 × 5 V 3 A / 9 V 2 A / 12 V 1.5 AMaximum Power of Standard USB-A Port12 WMaximum Power of USB-A Fast Charge Port18 WCar socket12 V 10 AMaximum power of car socket120 WDC5521 output12 V 10 AMaximum power of DC5521120 WBoot port12 VAC inputUp to 1500 WFull AC charging timeApproximately 1 hourDC input12–20 VMaximum DC input power200 WSolar input30–60 VMaximum solar input power400 WMPPT controllerYesUPS functionYesUPS switchover timeApproximately 10 msFlashlight5 modesFlashlight modesLow, medium, high, SOS, strobeNet weight18.8 kg / 41.4 lbDimensions393 × 280 × 270 mm / 15.5 × 11 × 10.6 inches
VTOMAN FlashSpeed600 600W Portable Power Station The VTOMAN FlashSpeed 600 is a portable power station with a capacity of 499 Wh, a continuous power output of 600 W, and a peak power output of up to 1200 W. Pure Sine Wave technology ensures a clean sine wave, while V-Beyond Technology allows it to reach a maximum power of 1,200 W. A total of 8 ports are available, allowing you to power up to 8 devices simultaneously. The power station also supports a UPS function with a switchover time of less than 20 ms and fast charging to 80% in about 1 hour. Durable LiFePO4 Battery The FlashSpeed 600 uses a LiFePO4 battery with a lifespan exceeding 3,000 cycles until it retains 80% of its original capacity. The DOD is 90%, allowing you to utilize a large portion of the stored energy. The battery’s declared shelf life is 5 years, and its operation is monitored by the SuperSafe™ LIFEBMS™ system with 10 layers of protection. Expand capacity up to 2,047 Wh The base capacity of the station is 499 Wh, but it can be increased to 2,047 Wh if needed by connecting an additional FlashSpeed 1500 battery, available separately. This solution allows you to extend the runtime of connected devices and better prepare for longer periods away from the power grid. The additional battery is not included in the standard package. 8 ports for multiple devices The VTOMAN FlashSpeed 600 is equipped with two AC outlets rated at 600 W continuous and 1,200 W peak power, two USB-A ports rated at up to 18 W each, and two USB-C ports rated at up to 100 W each. It also features a DC5521 12 V / 10 A output and a 12 V / 10 A car charger port, with a maximum combined power output of 120 W. In total, the station can power up to 8 devices simultaneously, making it easy to use various types of electronics and electrical equipment. Fast Charging from Multiple Sources The station can be charged from the mains via a 220–230 V AC input with a maximum power of 400 W. There is also a DC5521 input (12–50 V) with a power rating of up to 200 W, as well as an Anderson port for solar charging, which also supports 12–50 V and up to 200 W. The FlashSpeed 600 can reach an 80% charge level in about 1 hour, allowing it to quickly return to operational readiness. UPS Function and Pass-Through Charging The UPS function allows the FlashSpeed 600 to be used as an emergency power source. The switchover time is less than 20 ms, enabling a rapid transition to battery power in the event of a mains power outage. The unit also supports pass-through charging, so it can simultaneously charge its own battery and power connected devices. Portable Design for Various Conditions The VTOMAN FlashSpeed 600 weighs 7.2 kg and measures 316 × 203 × 243 mm, making it easy to transport as needed. The operating temperature range is from -20°C to 55°C, while charging can take place at temperatures ranging from 0°C to 55°C. The combination of 600 W of power, an extensive set of ports, UPS functionality, fast charging, and the ability to expand capacity makes the power station well-suited for use as both a mobile and emergency power source. Included in the package VTOMAN FlashSpeed 600 Power Station x1Car charger cable x1AC charging cable x1USB-C to USB-C cable x1USB-A to USB-C cable x1User manual x1 ManufacturerVTOMANNameFlashSpeed 600 Portable Power StationModelPB-86Capacity499 WhMaximum capacity with expansion2047 WhAdditional batteryFlashSpeed 1500, sold separatelyCell typeLiFePO4LifespanOver 3,000 cycles to 80% capacityStorage life5 yearsDOD90%Battery management systemSuperSafe™ LIFEBMS™Number of protection layers10Number of output ports8Number of devices that can be powered simultaneouslyUp to 8AC outlets2Continuous AC power600 WPeak AC power1,200 WAC output technologyPure Sine WaveTechnologyV-Beyond TechnologyUSB-A ports2USB-A specifications5 V 3 A / 9 V 2 A / 12 V 1.5 AMaximum USB-A port power18 WUSB-C Ports2USB-C Specifications5 V 3 A / 9 V 3 A / 12 V 3 A / 15 V 3 A / 20 V 3 A / 20 V 5 AMaximum USB-C Port Power100 WDC5521 output12 V 10 ACar power outlet12 V 10 AMaximum DC output power120 WAC input220–230 VMaximum AC input power400 WDC5521 input12–50 VMaximum DC5521 input power200 WAnderson input12–50 VMaximum Anderson input power200 WFast chargingUp to 80% in about 1 hourUPS functionYesUPS switchover time<20 msPass-through chargingYesNet weight7.2 kg / 15.9 lbDimensions316 × 203 × 243 mm / 12.4 × 7.9 × 9.5 inchesOperating Temperature-20°C to 55°C / 14°F to 113°FCharging temperature0°C to 55°C / 32°F to 113°F
VTOMAN FlashSpeed300 300W Portable Power Station The VTOMAN FlashSpeed 300 is a compact power station with a capacity of 230 Wh, a continuous power output of 300 W, and a peak power output of up to 600 W. The AC output features a pure sine wave, and there are a total of 7 ports available to power various devices while traveling, working off-grid, or during a power outage. The lightweight design with an ergonomic handle makes it easy to carry, and the built-in LED light with 3 modes can come in handy during trips and in emergency situations. LiFePO4 Battery for Years of Use The station uses a LiFePO4 battery with a lifespan exceeding 3,000 cycles while retaining 80% of its original capacity. According to the provided data, this can mean a lifespan up to six times longer than that of standard batteries, and the declared shelf life is 5 years. A DOD of 90% allows you to utilize a large portion of the available energy during everyday use. LifeBMS and 10 Safety Features LifeBMS technology is responsible for monitoring the battery’s operation, providing 10 levels of protection. The design is additionally constructed from V0-rated fire-resistant materials, which enhances safety during use of the station. The combination of the battery management system and the durable housing allows the device to be used both at home and for mobile applications. 7 ports for powering various devices The VTOMAN FlashSpeed 300 features a 230 V / 50 Hz AC outlet with a continuous power output of 300 W and a peak power output of 600 W, a USB-A port with fast charging up to 18 W, two USB-A ports with a combined power of 17 W, and a USB-C port with a power output of up to 100 W. There is also a DC5521 12 V / 10 A output with a maximum power of 120 W. This diverse set of connectors allows you to conveniently power mobile devices, electronic equipment, and small electrical appliances, among other things. Several Ways to Charge Quickly You can recharge the power bank in several ways, depending on your location and the available power source. Charging from a wall outlet takes about 2.5 hours at up to 90 W, while charging using the VTOMAN VS110 solar panel takes about 2–3 hours at a maximum power of 90 W. It is also possible to charge from a 12 V car outlet, which takes about 2 hours. The station also supports pass-through charging, so it can recharge itself and power connected devices at the same time. Compact Design and LED Light The FlashSpeed 300 is equipped with an ergonomic handle, which, combined with a net weight of 3.4 kg, makes it easy to carry the station wherever an additional power source is needed. The device measures just 270 × 130 × 240 mm, making it easy to store and transport. The station can operate at temperatures ranging from -20°C to 55°C, and charging is possible between 0°C and 55°C. The built-in LED lamp offers 3 operating modes, allowing it to also serve as an additional light source. Included in the package VTOMAN FlashSpeed 300 Power Station x1Car charger cable x1AC power adapter x1USB-C to USB-C cable x1USB-A to USB-C cable x1User manual x1 ManufacturerVTOMANNameFlashSpeed 300 Portable Power StationModelPB-82Capacity230 WhExpandable capacityNoCell typeLiFePO4LifespanOver 3,000 cycles to 80% capacityStorage life5 yearsDepth of Discharge (DOD)90%Battery Management SystemLifeBMSNumber of safety features10Housing materialV0-rated flame-retardant materialNumber of output ports7AC outlet1AC output specifications230 V 50 HzAC continuous power300 WAC peak power600 WAC output technologyPure Sine WaveUSB-A port5 V 3 A / 9 V 2 A / 12 V 1.5 AMaximum USB-A power18 WAdditional USB-A ports2 × 5 V 3.4 ATotal Power of Additional USB-A Ports17 WUSB-C Port5 V 3 A / 9 V 3 A / 12 V 3 A / 15 V 3 A / 20 V 3 A / 20 V 5 AMaximum USB-C power100 WDC5521 output12 V 10 AMaximum DC5521 power120 WUSB-C input5 V 3 A / 9 V 3 A / 12 V 3 A / 15 V 3 A / 20 V 3 A / 20 V 5 AMaximum USB-C input power100 WDC5521 input12–30 VMaximum DC5521 input power90 WCharging time from an AC outletApproximately 2.5 hoursMaximum AC charging power90 WCharging time with the VTOMAN VS110 solar panelApproximately 2–3 hoursMaximum solar charging power90 WCharging time via 12 V car outletApproximately 2 hoursPass-through chargingYesBuilt-in lightingLED, 3 modesNet weight3.4 kg / 7.4 lbWeight listed on marketing graphics3.18 kgDimensions270 × 130 × 240 mm / 10.24 × 7.42 × 7.87 inchesDimensions listed in the specification sheet27 × 13 × 24 mmOperating temperature-20°C to 55°C / 14°F to 113°FCharging temperature0°C to 55°C / 32°F to 113°F
VTOMAN Jump 2200 2200W Portable Power Station The VTOMAN Jump 2200 PB-29 delivers 2200 W of continuous power and up to 4400 W of peak power, allowing it to power both everyday devices and high-power equipment. The built-in LiFePO4 battery offers a capacity of 1,548 Wh, which can be increased to 3,096 Wh with an additional battery. Pure Sine Wave technology ensures a pure sine wave output, while V-Beyond Technology allows the station to power demanding appliances such as microwaves, washing machines, coffee makers, refrigerators, and air conditioners. There are also 12 outputs available for simultaneously powering multiple devices, as well as a car jump-start function for 12 V systems. High-Capacity and Durable LiFePO4 Battery The station’s base capacity is 1,548 Wh, and when an additional battery is connected, it can increase to 3,096 Wh, allowing for extended runtime off the grid. The LiFePO4 cells used provide over 3,000 charge cycles until 80% of their original capacity is retained, and according to the provided data, their lifespan is up to six times longer than that of standard lithium-ion units. Self-discharge is ≤100 μA, meaning that after one year without charging, the battery can retain over 85% of its energy, and the specified storage life is 5 years. LifeBMS and 10 Levels of Protection The LifeBMS system, which offers 10 protection levels, ensures safe battery operation. Protection includes, among other things, overvoltage, abnormal temperature, overcharging, over-discharge, short circuit, and current overload. The system continuously monitors the station’s key operating parameters, enhancing safety both during charging and when powering connected devices. 12 Outputs for Multiple Devices Simultaneously The VTOMAN Jump 2200 can power up to 12 devices simultaneously. It offers three 230 V / 50 Hz AC outlets, three 12 W USB-A ports, a USB-A Fast Charge port with up to 18 W, two USB-C ports with up to 100 W each, two DC5521 12 V / 10 A, and a 12 V / 10 A car outlet. The maximum shared power output for the DC outputs is 120 W, so the power station allows you to conveniently use AC-, USB-, and DC-powered devices at the same time. Car Jump-Start Function and Easy-to-Read LCD Screen The Jump 2200 can also function as a jump starter for vehicles with a 12 V electrical system. A dedicated port provides a starting current of 500 A and a peak current of up to 2,000 A; according to the manufacturer’s specifications, it takes approximately 3 seconds to start the vehicle. The built-in LCD screen displays the battery charge level, estimated remaining runtime, current power consumption in watts, and information about active output ports, making it easy to monitor the device’s operation. Flexible charging and uninterrupted operation The station can be recharged using an AC power adapter, solar panels, or a car outlet. The two DC5521 inputs support voltages from 12 to 60 V, and their maximum combined input power is 400 W. The Pass-Through Charging feature allows the station to charge itself and power connected devices simultaneously, so you don’t have to interrupt their operation while recharging. Mobile Design for Various Applications The VTOMAN Jump 2200 measures 360 × 270 × 280 mm and weighs 17.5 kg, allowing you to move the station as needed. The operating temperature range is from -20°C to 55°C, while charging can take place at temperatures ranging from 0°C to 55°C. The combination of high power, an extensive set of ports, a car jump-start function, and the ability to increase capacity makes the station suitable for use both at home and at work, or when away from a power outlet. Included in the set VTOMAN Jump 2200 Power Station x1AC charger with power cord x1Car charger cable x1USB-C to USB-C cable x1USB-A to USB-C cable x1User manual x1 ManufacturerVTOMANModelPB-29NameJump 2200 Portable Power StationBattery capacity1548 WhMaximum capacity after expansion3,096 WhCell typeLiFePO4Battery lifespanOver 3,000 cycles to 80% capacityStorage life5 yearsSelf-discharge≤100 μAEnergy Retention After One Year Without ChargingOver 85%Battery Management SystemLifeBMSNumber of Safety Protections10ProtectionsAgainst overvoltage, abnormal temperature, overcharging, short circuit, overcurrent, and over-dischargeNumber of devices that can be powered simultaneouslyUp to 12AC outlets3AC output specifications230 V 50 HzAC continuous power2200 WAC peak power4400 WAC output technologyPure Sine WaveTechnologyV-Beyond TechnologyUSB-A ports3 × 5 V 2.4 AMaximum USB-A port power12 WUSB-A Fast Charge port5 V 3 A / 9 V 2 A / 12 V 1.5 AMaximum USB-A Fast Charge power18 WUSB-C Ports2USB-C Specifications5 V 3 A / 9 V 3 A / 12 V 3 A / 15 V 3 A / 20 V 3 A / 20 V 5 AMaximum USB-C Port Power100 WDC5521 Outputs2 × 12 V 10 ACar Socket12 V 10 AMaximum Shared DC Power120 WJump Start Port12 VJump Start Current500 APeak starting current2000 AVehicle start-up time3 sDC inputs2 × DC5521DC input specifications12–60 VMaximum total DC input power400 WCharging methodsAC power adapter, solar panel, car chargerPass-through chargingYesDisplayLCDDisplay informationSOC, remaining runtime, current power consumption, active output portsNet weight17.5 kg / 38.5 lbDimensions360 × 270 × 280 mm / 14.2 × 10.6 × 11.1 inOperating temperature14–113°F / -20–55°CCharging temperature0–55°C / 32–113°F
Allpowers R600 299 Wh Power Station The ALLPOWERS R600 is a portable power station featuring a 299 Wh LiFePO4 battery, a 600 W pure sine wave inverter, and a peak power output of up to 1200 W. The device offers 10 outputs, allowing you to power and charge multiple devices simultaneously. It supports mains charging up to 400 W, solar panel charging up to 300 W, and charging via a car cigarette lighter socket up to 200 W. It also features a UPS function, a built-in 15 W wireless charger, an LCD screen, LED lighting, and the ability to control and monitor operation via the ALLPOWERS app. 600 W Power and Pure Sine Wave The built-in inverter provides 600 W of continuous power and up to 1200 W of peak power. The pure sine wave allows you to power devices that are sensitive to voltage quality, which is why the R600 can work not only with phones and laptops but also with many electrical devices with the appropriate power consumption. This solution is useful both during trips and in the event of a temporary power outage. LiFePO4 battery with thousands of charge cycles The station uses a battery built with LiFePO4 technology, which is characterized by high durability and operational stability. The cells can withstand over 3,500 charge cycles while retaining 80% of their initial capacity, allowing you to use the station regularly for a long time. A built-in safety system protects the device against overcharging, over-discharging, overloading, short circuits, excessive current, and temperatures that are too high or too low. Fast charging in several ways The maximum input power when charging from the mains is 400 W, which allows the station to charge from 0 to 100% in about an hour. In addition to a wall outlet, the R600 can be recharged using solar panels with a power output of up to 300 W. Charging from a car cigarette lighter socket with up to 200 W of power is also available, providing greater flexibility when traveling by car or RV. 10 outputs for powering various devices The ALLPOWERS R600 offers 2 AC outlets, 2 DC outputs, a car cigarette lighter output, 2 USB-C ports, 2 USB-A ports, and a 15 W wireless charger. This combination allows you to connect multiple devices simultaneously without having to constantly switch cables. So you can power equipment from an AC outlet, charge devices via USB, and use wireless charging all at the same time. LCD Screen, App, and UPS Function The easy-to-read LCD display lets you monitor the station’s key operating parameters, and the ALLPOWERS app allows you to further monitor and control the device. The UPS function enables you to use the R600 as an emergency power source for connected equipment during a power outage. The built-in LED lighting can also serve as an additional light source at home, while camping, or when working after dark. Safe and Convenient Design The housing features a sturdy handle that makes it easy to carry the unit between your home, car, or campsite. Its compact design allows for convenient storage, and the included bag helps protect it during transport. The combination of multiple charging methods, numerous outputs, and safety features makes the ALLPOWERS R600 a versatile mobile and emergency power source for many everyday applications. Included in the set ALLPOWERS R600 power stationStorage and carrying bagPower cordMC4 to XT60 cableUser manual ManufacturerALLPOWERSModelR600Battery capacity299 WhBattery typeLiFePO4Battery lifespanover 3,500 cycles to 80% capacityAC output power600 WPeak power1,200 WVoltage waveformpure sine waveMax. AC mains charging power400 WMax. input power from solar panels300 WMax. charging power from car cigarette lighter socket200 WNumber of outputs10Output typesAC x 2, DC x 2, Car cigarette lighter output, USB-C x 2, USB-A x 2Wireless charging15 WDisplayLCDLightingLEDUPS functionYesControl and monitoring via the ALLPOWERS appYesProtectionsagainst overheating, low temperature, over-discharge, overcharge, overload, short circuit, and overcurrent